FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_app/lcc/lcc_handle_timers.c @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 22 Dec 2019 21:24:29 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/****************************************************************************** * Power Task (pwr) * Design and coding by Svend Kristian Lindholm, skl@ti.com * * Timers * * $Id: pwr_handle_timers.c 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $ * ******************************************************************************/ #ifndef __PWR_HANDLE_TIMERS_C_ #define __PWR_HANDLE_TIMERS_C_ UINT32 rvf_get_tick_count(void); void pwr_check_timers(void); T_RVM_RETURN pwr_create_timer(UINT32 *timer_begin); T_RVM_RETURN pwr_start_timer(UINT32 *timer_begin); void stop_ci_charge(void); void pwr_modulate_off(void); void pwr_send_msg(uint32 msg_id ,T_RVF_ADDR_ID src_addr_id, T_RVF_ADDR_ID dest_addr_id); int pwr_capacity(uint16 Vbat); void mmi_send_msg(struct mmi_info_ind_s *event); void end_charging_house_keeping(void); void cv_charging_house_keeping(void); // Timer functions UINT32 pwr_timer_elapsed(UINT32 time_begin, UINT32 current_timer) { // return elapsed time in [ms] return (current_timer - time_begin) * 60 / 13; } T_RVM_RETURN pwr_start_timer(UINT32 *timer_begin) { ttw(ttr(TTrTimer, "pwr_start_timer(%d)" NL, 0)); // Start timer (will be checked each time an ADC measurement is received) *timer_begin = rvf_get_tick_count(); ttw(ttr(TTrTimer, "pwr_start_timer(%d)" NL, 0xFF)); return (RV_OK); } T_RVM_RETURN pwr_stop_timer(UINT32 *timer_begin) { ttw(ttr(TTrTimer, "pwr_stop_timer(%d)" NL, 0)); *timer_begin = 0; ttw(ttr(TTrTimer, "pwr_stop_timer(%d)" NL, 0xFF)); return (RV_OK); } void pwr_stop_timers(void) { // Only stop charging related timers - not supervision timers pwr_stop_timer(&pwr_ctrl->time_begin_T1); pwr_stop_timer(&pwr_ctrl->time_begin_T2); pwr_stop_timer(&pwr_ctrl->time_begin_T3); pwr_stop_timer(&pwr_ctrl->time_begin_T4); pwr_stop_timer(&pwr_ctrl->time_begin_mod_cycle); } T_RVM_RETURN pwr_create_timer(UINT32 *timer_begin) { ttw(ttr(TTrTimer, "pwr_create_timer(%d)" NL, 0)); *timer_begin = 0; ttw(ttr(TTrTimer, "pwr_create_timer(%d)" NL, 0xFF)); return (RV_OK); } T_RV_RET process_pwr_handle_T1_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T1_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : break; case CCI : case CCV : case LCI : case LCV : // Change state pwr_ctrl->state = SUP; end_charging_house_keeping(); break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T1_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } ttw(ttr(TTrTimer, "process_pwr_handle_T1_expiration(%d)" NL, 0xFF)); pwr_free(request); } T_RV_RET process_pwr_handle_T2_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T2_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Another timer did expire prior to the T2 timer - ignore this expiration break; case CCV : case LCV : // Change state pwr_ctrl->state = SUP; end_charging_house_keeping(); break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T2_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_T2_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_T3_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T3_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Stop & reset timers pwr_stop_timers(); break; case CCI : case CCV : case LCI : case LCV : break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T3_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_T3_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_T4_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_T4_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Yes - since timing issues can make this timer expire in SUP state // It can take a long time before we know if a charger has been unplugged break; case CCV : case LCV : pwr_stop_timer(&pwr_ctrl->time_begin_T4); pwr_modulate_off(); // Wait for duty cycle timer to expire before restarting this timer break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_T4_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_T4_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_mod_cycle_expiration (T_PWR_REQ *request) { ttw(ttr(TTrTimer, "process_pwr_handle_mod_cycle_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Yes - since timing issues can make this timer expire in SUP state // It can take a long time before we know if a charger has been unplugged break; case CCV : case LCV : // Calculate k value // Start DC timer // Start T4 timer based on k value // Modulation ON cv_charging_house_keeping(); break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_mod_cycle_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_mod_cycle_expiration(%d)" NL, 0xFF)); } T_RV_RET process_pwr_handle_mmi_info_expiration(T_PWR_REQ *request) { struct mmi_info_ind_s MMI_Event; ttw(ttr(TTrTimer, "process_pwr_handle_mmi_info_expiration(%d)" NL, 0)); switch (pwr_ctrl->state) { case SUP : // Send MMI info events according to configured repetition interval if (pwr_ctrl->flag_mmi_registered == 1) { pwr_ctrl->mmi_ptr->header.msg_id = MMI_BAT_SUPERVISION_INFO_IND; pwr_ctrl->mmi_ptr->Vbat = pwr_cfg->data.Vbat_avg_mV; pwr_ctrl->mmi_ptr->Tbat = pwr_cfg->data.Tbat_avg; pwr_ctrl->mmi_ptr->Cbat = pwr_capacity(pwr_cfg->data.Vbat_avg_mV); mmi_send_msg(pwr_ctrl->mmi_ptr); } // Restart timer ttw(ttr(TTrTimerLow,"MMI info timer started(%d)" NL, 0)); pwr_start_timer(&pwr_ctrl->time_begin_mmi_rep); break; case INI : case CCI : case CCV : case LCI : case LCV : // DON'T send any events when charging or initializing break; default : { // Exception Handling - Unknown State ttr(TTrFatal, "process_pwr_handle_mmi_info_expiration: Unknown State: %d" NL, pwr_ctrl->state); break; } } pwr_free(request); ttw(ttr(TTrTimer, "process_pwr_handle_mmi_info_expiration(%d)" NL, 0xFF)); } void pwr_check_timers() { UINT32 timer; ttw(ttr(TTrTimer, "pwr_check_timers(%d)" NL, 0)); // Check timers T1, T2, T3, T4, duty cycle & mmi timer - if expired send timer expired events timer = rvf_get_tick_count(); // T1 if (pwr_ctrl->time_begin_T1 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T1 = pwr_timer_elapsed(pwr_ctrl->time_begin_T1, timer); if (pwr_ctrl->time_elapsed_T1 > pwr_cfg->bat.T1) { // EXPIRED! ttw(ttr(TTrTimer, "T1 expired (%d):" NL, pwr_ctrl->time_elapsed_T1)); // 'Stop' timer pwr_ctrl->time_elapsed_T1 = 0; pwr_ctrl->time_begin_T1 = 0; // Send timer expired event pwr_send_msg(TIMER_T1_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // T2 if (pwr_ctrl->time_begin_T2 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T2 = pwr_timer_elapsed(pwr_ctrl->time_begin_T2, timer); if (pwr_ctrl->time_elapsed_T2 > pwr_cfg->bat.T2) { // EXPIRED! ttw(ttr(TTrTimer, "T2 expired (%d):" NL, pwr_ctrl->time_elapsed_T2)); // 'Stop' timer pwr_ctrl->time_elapsed_T2 = 0; pwr_ctrl->time_begin_T2 = 0; // Send timer expired event pwr_send_msg(TIMER_T2_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // T3 if (pwr_ctrl->time_begin_T3 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T3 = pwr_timer_elapsed(pwr_ctrl->time_begin_T3, timer); if (pwr_ctrl->time_elapsed_T3 > pwr_cfg->bat.T3) { // EXPIRED! ttw(ttr(TTrTimer, "T3 expired (%d):" NL, pwr_ctrl->time_elapsed_T3)); // 'Stop' timer pwr_ctrl->time_elapsed_T3 = 0; pwr_ctrl->time_begin_T3 = 0; // Send timer expired event pwr_send_msg(TIMER_T3_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // T4 if (pwr_ctrl->time_begin_T4 != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_T4 = pwr_timer_elapsed(pwr_ctrl->time_begin_T4, timer); if (pwr_ctrl->time_elapsed_T4 > pwr_cfg->data.T4) { // EXPIRED! ttw(ttr(TTrTimer, "T4 expired (%d):" NL, pwr_ctrl->time_elapsed_T4)); // 'Stop' timer pwr_ctrl->time_elapsed_T4 = 0; pwr_ctrl->time_begin_T4 = 0; // Send timer expired event pwr_send_msg(TIMER_T4_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // Duty cycle timer (Lithium only) if (pwr_ctrl->time_begin_mod_cycle != 0) { // Started - but is it expired? pwr_ctrl->time_elapsed_mod_cycle = pwr_timer_elapsed(pwr_ctrl->time_begin_mod_cycle, timer); if (pwr_ctrl->time_elapsed_mod_cycle > pwr_cfg->common.mod_cycle) { // EXPIRED! ttw(ttr(TTrTimer, "DC expired (%d):" NL, pwr_ctrl->time_elapsed_mod_cycle)); // 'Stop' timer pwr_ctrl->time_elapsed_mod_cycle = 0; pwr_ctrl->time_begin_mod_cycle = 0; // Send timer expired event pwr_send_msg(TIMER_MOD_CYCLE_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } // MMI repetition timer if (pwr_ctrl->time_begin_mmi_rep != 0) { // Started - but has it expired? pwr_ctrl->time_elapsed_mmi_rep = pwr_timer_elapsed(pwr_ctrl->time_begin_mmi_rep, timer); if (pwr_ctrl->time_elapsed_mmi_rep > pwr_cfg->mmi.repetition) { // EXPIRED! // 'Stop' timer pwr_ctrl->time_elapsed_mmi_rep = 0; pwr_ctrl->time_begin_mmi_rep = 0; ttw(ttr(TTrTimer, "MMI info timer expired (%d):" NL, pwr_ctrl->time_elapsed_mmi_rep)); // Send timer expired event pwr_send_msg(TIMER_MMI_INFO_EXPIRED, pwr_ctrl->addr_id, pwr_ctrl->addr_id); } } ttw(ttr(TTrTimer, "pwr_check_timers(%d)" NL, 0xFF)); } #endif