FreeCalypso > hg > fc-magnetite
view src/cs/layer1/dyn_dwl_include/l1_dyn_dwl_const.h @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 22 Dec 2019 21:24:29 +0000 |
| parents | 50a15a54801e |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1_DYN_DWL_CONST.H * * Filename l1_dyn_dwl_const.h.h * Copyright 2004 (C) Texas Instruments * ************* Revision Controle System Header *************/ #if (L1_DYN_DSP_DWNLD == 1) #ifndef _L1_DYN_DWL_CONST_H_ #define _L1_DYN_DWL_CONST_H_ /* DSP dynamic download background task id */ #define C_BGD_DSP_DYN_DWNLD 9 #define RED 1 #define GREEN 0 #define MAX_NUM_OF_PATCH_IDS 5 #define MAX_NUM_OF_SEMAPHORES 6 #define NUM_OF_DYN_DWNLD_PRIMITIVES 6 #define NUM_WORDS_COPY_API 256 // even value mandatory #define START_API_DWNLD_AREA 0x1808 // 0x1808 #define SIZE_API_DWNLD_AREA 0x7F8 // 0x800 #define START_API_DWNLD_AREA_DURING_E2 0x10C1 // 0x10BE #define SIZE_API_DWNLD_AREA_DURING_E2 0x15B // 0x410 #define MCU_API_BASE_ADDRESS 0xFFD00000L #define DSP_API_BASE_ADDRESS 0x800 /* Dynamic Download API base address */ #define C_DYN_DWNLD_API_BASE_ADDRESS 0x17F6 #define HEADER_PATCH_SIZE 4 #if(CODE_VERSION == SIMULATION) #define CRC_SIMU_OK 0xCAFE #define SIZE_DWNLD_AREA_SIMU 2048 #endif #define TRUE 1 #define FALSE 0 /* Define commands MCU/DSP*/ #define C_DWL_DOWNLOAD_CTRL_DSP_ACK 0 #define C_DWL_DOWNLOAD_CTRL_DOWNLOAD 1 #define C_DWL_DOWNLOAD_CTRL_INSTALL 2 #define C_DWL_DOWNLOAD_CTRL_UNINSTALL 3 #define C_DWL_DOWNLOAD_CTRL_ABORT 4 #define C_DWL_DOWNLOAD_CTRL_INIT 5 #define C_DWL_ERR_RESET 0 #endif // _L1_DYN_DWL_CONST_H_ #endif // L1_DYN_DSP_DWNLD