FreeCalypso > hg > fc-magnetite
view src/cs/layer1/gtt_include/ctm/ucs_functions.h @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 22 Dec 2019 21:24:29 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/* ******************************************************************************* * * COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH * 90411 NUERNBERG, GERMANY, Tel Int + 49 911 5217 100 * * The program(s) may be used and/or copied only with the * written permission from Ericsson or in accordance * with the terms and conditions stipulated in the agreement or * contract under which the program(s) have been supplied. * ******************************************************************************* * * File : baudot_functions.h * Author : EEDN/RV Matthias Doerbecker * Tested Platforms : Windows NT 4.0 * Description : header file for ucs_functions.c * * Revision history * * $Log: $ * ******************************************************************************* */ #ifndef ucs_functions_h #define ucs_functions_h "$Id: $" /* ******************************************************************************* * INCLUDE FILES ******************************************************************************* */ #include "fifo.h" /* ******************************************************************************* * DEFINITIONS ******************************************************************************* */ /****************************************************************************/ /* convertChar2UCScode() */ /* ********************* */ /* Conversion from character into UCS code */ /* (Universal Multiple-Octet Coded Character Set, Row 00 */ /* of the Multilingual plane according to ISO/IEC 10646-1). */ /* This routine only handles characters in the range 0...255 since that is */ /* all that is required for the demonstration of Baudot support. */ /* */ /* input variables: */ /* - inChar charcater that shall be converted */ /* */ /* return value: UCS code of the input character */ /* or 0xFFFF in case that inChar is not valid */ /* (e.g. inChar=='\0') */ /* */ /* Matthias Doerbecker, Ericsson Eurolab Deutschland (EED/N/RV), 2000/09/18 */ /****************************************************************************/ UWORD16 convertChar2UCScode(char inChar); /****************************************************************************/ /* convertUCScode2char() */ /* ********************* */ /* Conversion from UCS code into character */ /* This routine only handles characters in the range 0...255 since that is */ /* all that is required for the demonstration of Baudot support. */ /* */ /* input variables: */ /* - ucsCode UCS code index, */ /* must be within the range 0...255 if BITS_PER_SYMB==8, */ /* or in the range 0...63 if BITS_PER_SYMB==6, */ /* */ /* return value: character (or '\0' if ucsCode is not valid) */ /* */ /* Matthias Doerbecker, Ericsson Eurolab Deutschland (EED/N/RV), 2000/09/18 */ /****************************************************************************/ char convertUCScode2char(UWORD16 ucsCode); /****************************************************************************/ /* transformUCS2UTF() */ /* ****************** */ /* Transformation from UCS code into UTF-8. UTF-8 is a sequence consisting */ /* of 1, 2, 3, or 5 octets (bytes). See ISO/IEC 10646-1 Annex G. */ /* */ /* This routine only handles UCS codes in the range 0...0xFF since that is */ /* all that is required for the demonstration of Baudot support. */ /* */ /* input variables: */ /* - ucsCode UCS code index, */ /* */ /* output variables: */ /* - ptr_octet_fifo_state pointer to the output fifo state buffer for */ /* the UTF-8 octets. */ /* */ /* Matthias Doerbecker, Ericsson Eurolab Deutschland (EED/N/RV), 2000/06/29 */ /****************************************************************************/ void transformUCS2UTF(UWORD16 ucsCode, fifo_state_t* ptr_octet_fifo_state); /****************************************************************************/ /* transformUTF2UCS() */ /* ****************** */ /* Transformation from UTF-8 into UCS code. */ /* */ /* This routine only handles UTF-8 sequences consisting of one or two */ /* octets (corresponding to UCS codes in the range 0...0xFF) since that is */ /* all that is required for the demonstration of Baudot support. */ /* */ /* input/output variables: */ /* - ptr_octet_fifo_state pointer to the input fifo state buffer for */ /* the UTF-8 octets. */ /* */ /* output variables: */ /* - *ptr_ucsCode UCS code index */ /* */ /* return value: */ /* true, if conversion was successful */ /* false, if the input fifo buffer didn't contain enough octets for a */ /* conversion into UCS code. The output variable *ptr_ucsCode */ /* doesn't contain a valid value in this case */ /* */ /* Matthias Doerbecker, Ericsson Eurolab Deutschland (EED/N/RV), 2000/06/29 */ /****************************************************************************/ BOOL transformUTF2UCS(UWORD16 *ptr_ucsCode, fifo_state_t *ptr_octet_fifo_state); #endif