FreeCalypso > hg > fc-magnetite
view src/cs/layer1/gtt_include/l1gtt_const.h @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 22 Dec 2019 21:24:29 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1GTT_CONST.C * * Filename l1gtt_const.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ //---------------------------------------- // MCU<->DSP communication bit field. //---------------------------------------- // NDB area // bit in d_audio for tty features #define B_GTT_START (TRUE_L << 4) #define B_GTT_STOP (TRUE_L << 5) //------------------------------- // GTT background task status //------------------------------- #define GTT_ACTIVATED 1 #define GTT_IDLE 0 //---------------------------- // GTT DSP customizable values //---------------------------- #define C_TTY_MOD_NORM 0x3FFF // Sets the amplitude of the TTY modulator output #define C_TTY_DETECT_THRES 0x1800 // Threshold for detection by the TTY estimator #define C_TTY_FA_THRES 0x0CCC // Threshold for TTY false alarm detection #define C_CTM_DETECT_SHIFT 0x0000 // Shift of the threshold used for detection by the CTM estimator //------------------------- // FIFO constants //------------------------- // FIFO size // Note: Practical size is equal to acutual size + 1. #define FIFO_1_size 0x1C //28 #define FIFO_2_size 0x3C //60 #define FIFO_3_size 0x3C //60 #define FIFO_4_size 0x1C //28 // Header size #define HEADER_size (sizeof(T_TTY_FIFO_struct)/2) /***********************************************************************/ /* ___ * ___ */ /* @dsp 10BE | R | * @mcu FFD0117C | R | */ /* | W | * | W | */ /* | S | * | S | */ /* | L | * | L | */ /* | x | * | x | */ /* FIFO 1 | x | * | x | */ /* | x | * | x | */ /* | x | * | x | */ /* | x | * | x | */ /* | x | * | x | */ /* | x | * | x | */ /* | x | * | x | */ /* |___| * |___| */ /* ___ * ___ */ /* @dsp 10DF | R | * @mcu FFD011BE | R | */ /* | . | * | . | */ /* FIFO 2 | . | * FIFO 2 | . | */ /* |___| * |___| */ /* ___ * ___ */ /* @dsp 1120 | R | * @mcu FFD01240 | R | */ /* | . | * | . | */ /* FIFO 3 | . | * FIFO 3 | . | */ /* |___| * |___| */ /* ___ * ___ */ /* @dsp 1161 | R | * @mcu FFD012C2 | R | */ /* | . | * | . | */ /* FIFO 4 | . | * FIFO 4 | . | */ /* |___| * |___| */ /* * */ /***********************************************************************/ //FIFO @dress dsp #define FIFO_1_dsp 0x10BE // corresponds to the speech recognition buffer #define FIFO_2_dsp (FIFO_1_dsp + HEADER_size + FIFO_1_size + 1) #define FIFO_3_dsp (FIFO_2_dsp + HEADER_size + FIFO_2_size + 1) #define FIFO_4_dsp (FIFO_3_dsp + HEADER_size + FIFO_3_size + 1) //FIFO @dress mcu #define FIFO_1_mcu 0xFFD0117C // corresponds to the speech recognition buffer #define FIFO_2_mcu (FIFO_1_mcu + ((HEADER_size + FIFO_1_size + 1) * 2)) #define FIFO_3_mcu (FIFO_2_mcu + ((HEADER_size + FIFO_2_size + 1) * 2)) #define FIFO_4_mcu (FIFO_3_mcu + ((HEADER_size + FIFO_3_size + 1) * 2)) // Return status #define TTY_FIFO_OK 0 #define TTY_FIFO_OVERFLOW 1 #define TTY_FIFO_UNDERFLOW 2 #define TTY_FIFO_WRONG_COMMAND 3 /* GTT Event group defines */ #define DATA_AVAIL_EVENT 0x00000001 // BIT_0 #define INIT_EVENT 0x00000002 // BIT_1 #define EXIT_EVENT 0x00000004 // BIT_2 #define DSP_API_START 0x800 /* constant definitions */ /* Time interval to check for incoming data, in ms */ #define TIME_INTERVAL_OF_INPUTS 120 /* Max number of CTM sample inputs */ #define MAX_CTM_SAMPLES_IN (TIME_INTERVAL_OF_INPUTS * 2)/5 /* Max number of Baudot sample inputs */ #define MAX_BAUDOT_SAMPLES_IN (TIME_INTERVAL_OF_INPUTS * 1)/5 /* Max number of TTY code from inputs */ #define MAX_TTY_CODE_IN (TIME_INTERVAL_OF_INPUTS / 176 + 2) /* Max number of CTM sample outputs */ #define MAX_CTM_SAMPLES_OUT MAX_CTM_SAMPLES_IN /* Max number of Baudot bits outputs */ #define MAX_BAUDOT_BITS_OUT 2*(MAX_TTY_CODE_IN)* 8 /* Number of processing cycles before the next Enquiry burst */ #define ENQUIRY_BURST_TIMEOUT (1320/5) #define UWORD16_MAX 65535 #define WORD16_MAX 32767 #define WORD32_MAX 2147483647L /* GTT loops for test: TST_CLOSE_GTT_LOOP_REQ message */ #define TTY_LOOP 0x0001 // Close TTY loop (TTY modulator -> TTY estimator) #define CTM_LOOP 0x0002 // Close CTM loop (CTM samples : speech encoder -> speech decoder) #if (L2_L3_SIMUL) #define CTM_TX_INPUT 1 // input on CTM transmitter #define TTY_ENC_INPUT 2 // input on Baudot encoder #define CTM_RX_INPUT 3 // input on CTM receiver (simulation only) #define TTY_DEC_INPUT 4 // input on Baudot decoder (simulation only) #endif