view src/cs/layer1/gtt_include/l1gtt_defty.h @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1GTT_DEFTY.H
 *
 *        Filename l1gtt_defty.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#ifndef _L1GTT_DEFTY_H_
#define _L1GTT_DEFTY_H_

#if (L1_GTT == 1)

  // GTT L1A/L1S COM structure
  //---------------------------

  typedef struct
  {
    BOOL  start;
    BOOL  stop;
  }
  T_GTT_COMMAND;

  typedef struct
  {
    UWORD8  scen_enable;
    UWORD16 rate;
  }
  T_GTT_TEST;

  typedef struct
  {
    T_GTT_TEST    test;
    T_GTT_COMMAND command;
  }
  T_GTT_TASK;

  // FIFO structure
  //----------------

    #if (CODE_VERSION == SIMULATION)

      // DSP address do not exist --> 32-bit addresses
      typedef struct
      {
        API *ptr_read;         //API pointer to current data to read
        API *ptr_write;        //API pointer to free area to write to
        API *buffer_start;     //pointer to start
        UWORD16 buffer_length;    //length of buffer
      }
      T_TTY_FIFO_struct;

    #else

      typedef struct
      {
        API ptr_read;         //API pointer to current data to read
        API ptr_write;        //API pointer to free area to write to
        API buffer_start;     //pointer to start
        API buffer_length;    //length of buffer
      }
      T_TTY_FIFO_struct;

    #endif

  // GTT test data
  //--------------

  typedef struct
  {
    UWORD16 scen_index;
    UWORD16 scen_length;
    char   *scen_ptr;
    UWORD8  chars_to_push;
    UWORD16 frame_count;
  }
  T_GTT_TEST_L1S;

#endif 


#endif //_L1GTT_DEFTY_H_