FreeCalypso > hg > fc-magnetite
view src/cs/layer1/gtt_include/l1gtt_signa.h @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 22 Dec 2019 21:24:29 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1GTT_SIGNA.H * * Filename l1gtt_signa.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #if (L1_GTT == 1) #define P_GTT ( 0x19 ) // Messages Upper layer <-> L1A #define MMI_GTT_START_REQ ( ( P_GTT << 8 ) | 1 ) #define MMI_GTT_START_CON ( ( P_GTT << 8 ) | 2 ) #define MMI_GTT_STOP_REQ ( ( P_GTT << 8 ) | 3 ) #define MMI_GTT_STOP_CON ( ( P_GTT << 8 ) | 4 ) // Messages L1S <-> L1A #define L1_GTT_START_CON ( ( P_GTT << 8 ) | 5 ) #define L1_GTT_STOP_CON ( ( P_GTT << 8 ) | 6 ) // Test messages #define TST_CLOSE_GTT_LOOP_REQ ( ( P_GTT << 8 ) | 7 ) #define TST_CLOSE_GTT_LOOP_CON ( ( P_GTT << 8 ) | 8 ) #define TST_OPEN_GTT_LOOP_REQ ( ( P_GTT << 8 ) | 9 ) #define TST_OPEN_GTT_LOOP_CON ( ( P_GTT << 8 ) | 10 ) #define TST_START_GTT_TEST_REQ ( ( P_GTT << 8 ) | 11 ) #define TST_START_GTT_TEST_CON ( ( P_GTT << 8 ) | 12 ) #define TST_STOP_GTT_TEST_REQ ( ( P_GTT << 8 ) | 13 ) #define TST_STOP_GTT_TEST_CON ( ( P_GTT << 8 ) | 14 ) #endif // L1_GTT == 1