FreeCalypso > hg > fc-magnetite

view src/cs/layer1/include/l1_macro.h @ 624:012028896cfb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 * L1_MACRO.H
 *
 *        Filename l1_macro.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#include "l1_confg.h"

#if(L1_DYN_DSP_DWNLD == 1)
  #include "l1_dyn_dwl_const.h"
#endif

#if (TRACE_TYPE==5) && NUCLEUS_TRACE
//WARNING : this type of trace takes a lot of space in data RAM (~16kB)

  // switch for Nucleus debugging messages.
  #define NU_ALLOC_ERR      0
  #define NU_DEALLOC_ERR    1
  #define NU_RCVE_QUEUE_ERR 2
  #define NU_SEND_QUEUE_ERR 3
  #define NU_OBTA_SEMA_ERR  4
  #define NU_RLSE_SEMA_ERR  5

  // Nucleus debug function.
    #define DEBUGMSG(status,type) \
    if(status) switch(type) \
    { \
      case NU_ALLOC_ERR: \
      printf("NU mem. allocation error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_DEALLOC_ERR: \
      printf("NU mem. deallocation error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_RCVE_QUEUE_ERR: \
      printf("NU rcve queue error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_SEND_QUEUE_ERR: \
      printf("NU send queue error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_OBTA_SEMA_ERR: \
      printf("NU obtain semaph. error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_RLSE_SEMA_ERR: \
      printf("NU release semaph. error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      default: \
      printf("Unknown error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
    }
#else
  #define DEBUGMSG(status,type)
#endif

/************************************************************/
/* Macros for FAST INTEGER MODULO implementation.           */
/************************************************************/
#define IncMod(operand, increment, modulo) \
  if( (operand += increment) >= modulo ) operand -= modulo
  

// Define MACRO for selecting the min. time to next task.
#define Select_min_time(Task_Time, Min_Time) \
  if(Task_Time < Min_Time) Min_Time = Task_Time;


/************************************************************/
/* Macros for MCU/DSP API address conversion    .           */
/************************************************************/
#if(L1_DYN_DSP_DWNLD == 1)

#define API_address_dsp2mcu(dsp_address) \
  (MCU_API_BASE_ADDRESS + ((API)((dsp_address) - DSP_API_BASE_ADDRESS) * 2))

#define API_address_mcu2dsp(mcu_address) \
  (DSP_API_BASE_ADDRESS + ((UWORD32)((mcu_address) - MCU_API_BASE_ADDRESS) / 2))
#endif