FreeCalypso > hg > fc-magnetite
view src/cs/layer1/p_include/l1p_sign.h @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 22 Dec 2019 21:24:29 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1P_SIGN.H * * Filename l1p_sign.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #define P_GPRS ( P_L1C + 2 ) // Messages Packet Transfer <-> L1A #define MPHP_SINGLE_BLOCK_REQ ( ( P_GPRS << 8 ) | 1 ) #define MPHP_SINGLE_BLOCK_CON ( ( P_GPRS << 8 ) | 2 ) #define MPHP_STOP_SINGLE_BLOCK_REQ ( ( P_GPRS << 8 ) | 3 ) #define MPHP_STOP_SINGLE_BLOCK_CON ( ( P_GPRS << 8 ) | 4 ) #define L1P_SINGLE_BLOCK_CON ( ( P_GPRS << 8 ) | 5 ) #define MPHP_ASSIGNMENT_REQ ( ( P_GPRS << 8 ) | 6 ) #define MPHP_ASSIGNMENT_CON ( ( P_GPRS << 8 ) | 7 ) #define MPHP_TBF_RELEASE_REQ ( ( P_GPRS << 8 ) | 8 ) #define MPHP_TBF_RELEASE_CON ( ( P_GPRS << 8 ) | 9 ) #define MPHP_REPEAT_UL_FIXED_ALLOC_REQ ( ( P_GPRS << 8 ) | 10 ) #define MPHP_REPEAT_UL_FIXED_ALLOC_CON ( ( P_GPRS << 8 ) | 11 ) #define MPHP_PDCH_RELEASE_REQ ( ( P_GPRS << 8 ) | 12 ) #define MPHP_PDCH_RELEASE_CON ( ( P_GPRS << 8 ) | 13 ) #define MPHP_TIMING_ADVANCE_REQ ( ( P_GPRS << 8 ) | 14 ) #define MPHP_TIMING_ADVANCE_CON ( ( P_GPRS << 8 ) | 15 ) #define MPHP_UPDATE_PSI_PARAM_REQ ( ( P_GPRS << 8 ) | 16 ) #define MPHP_UPDATE_PSI_PARAM_CON ( ( P_GPRS << 8 ) | 17 ) #define MPHP_RA_REQ ( ( P_GPRS << 8 ) | 18 ) #define MPHP_RA_CON ( ( P_GPRS << 8 ) | 19 ) #define MPHP_RA_STOP_REQ ( ( P_GPRS << 8 ) | 20 ) #define MPHP_RA_STOP_CON ( ( P_GPRS << 8 ) | 21 ) #define MPHP_POLLING_RESPONSE_REQ ( ( P_GPRS << 8 ) | 22 ) #define MPHP_POLLING_IND ( ( P_GPRS << 8 ) | 23 ) #define L1P_RA_DONE ( ( P_GPRS << 8 ) | 24 ) // Messages Packet Idle <-> L1A #define MPHP_START_PCCCH_REQ ( ( P_GPRS << 8 ) | 25 ) #define MPHP_STOP_PCCCH_REQ ( ( P_GPRS << 8 ) | 26 ) #define MPHP_STOP_PCCCH_CON ( ( P_GPRS << 8 ) | 27 ) #define MPHP_SCELL_PBCCH_REQ ( ( P_GPRS << 8 ) | 28 ) #define MPHP_SCELL_PBCCH_STOP_REQ ( ( P_GPRS << 8 ) | 29 ) #define MPHP_SCELL_PBCCH_STOP_CON ( ( P_GPRS << 8 ) | 30 ) #define MPHP_CR_MEAS_REQ ( ( P_GPRS << 8 ) | 31 ) #define MPHP_CR_MEAS_STOP_REQ ( ( P_GPRS << 8 ) | 32 ) #define MPHP_CR_MEAS_STOP_CON ( ( P_GPRS << 8 ) | 33 ) #define MPHP_INT_MEAS_REQ ( ( P_GPRS << 8 ) | 34 ) #define MPHP_INT_MEAS_STOP_REQ ( ( P_GPRS << 8 ) | 35 ) #define MPHP_INT_MEAS_STOP_CON ( ( P_GPRS << 8 ) | 36 ) #define MPHP_NCELL_PBCCH_REQ ( ( P_GPRS << 8 ) | 37 ) #define MPHP_NCELL_PBCCH_STOP_REQ ( ( P_GPRS << 8 ) | 38 ) #define MPHP_NCELL_PBCCH_STOP_CON ( ( P_GPRS << 8 ) | 39 ) #define MPHP_DATA_IND ( ( P_GPRS << 8 ) | 40 ) #define MPHP_CR_MEAS_IND ( ( P_GPRS << 8 ) | 41 ) #define MPHP_INT_MEAS_IND ( ( P_GPRS << 8 ) | 42 ) #define MPHP_TINT_MEAS_IND ( ( P_GPRS << 8 ) | 43 ) #define MPHP_NCELL_PBCCH_IND ( ( P_GPRS << 8 ) | 44 ) #define MPHP_TCR_MEAS_REQ ( ( P_GPRS << 8 ) | 45 ) #define MPHP_TCR_MEAS_IND ( ( P_GPRS << 8 ) | 46 ) #define MPHP_TCR_MEAS_STOP_REQ ( ( P_GPRS << 8 ) | 47 ) #define MPHP_TCR_MEAS_STOP_CON ( ( P_GPRS << 8 ) | 48 ) /*** L1S -> L1A communication ***/ #define L1P_PALLC_INFO ( ( P_GPRS << 8) | 49) #define L1P_PNP_INFO ( ( P_GPRS << 8) | 50) #define L1P_PEP_INFO ( ( P_GPRS << 8) | 51) #define L1P_PBCCHS_INFO ( ( P_GPRS << 8) | 52) #define L1P_PACCH_INFO ( ( P_GPRS << 8) | 53) #define L1P_CR_MEAS_DONE ( ( P_GPRS << 8) | 54) #define L1P_TRANSFER_DONE ( ( P_GPRS << 8) | 55) #define L1P_TCR_MEAS_DONE ( ( P_GPRS << 8) | 56) #define L1P_TBF_RELEASED ( ( P_GPRS << 8) | 57) #define L1P_ITMEAS_IND ( ( P_GPRS << 8) | 58) #define L1P_POLL_DONE ( ( P_GPRS << 8) | 59) #define L1P_PDCH_RELEASED ( ( P_GPRS << 8) | 60) #define L1P_TA_CONFIG_DONE ( ( P_GPRS << 8) | 61) #define L1P_PBCCHN_INFO ( ( P_GPRS << 8) | 62) #define L1P_REPEAT_ALLOC_DONE ( ( P_GPRS << 8) | 63) #define L1P_ALLOC_EXHAUST_DONE ( ( P_GPRS << 8) | 64)