FreeCalypso > hg > fc-magnetite

view src/cs/layer1/tm_cust0/l1tm_tpu10.c @ 624:012028896cfb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents cc44352c702f
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1TM_TPU10.C
 *
 *        Filename l1tm_tpu10.c
 *        Version  1.4
 *        Date     01/10/03
 * 
 ************* Revision Controle System Header *************/

#include "l1_confg.h"
#if (TESTMODE && (RF==10))

#include "tm_defs.h"
#include "l1_const.h"
#include "l1_types.h"
					
#include "l1tm_defty.h"
#include "l1tm_cust.h"
#include "l1tm_tpu10.h"

#if (AUDIO_TASK == 1)
  #include "l1audio_const.h"
  #include "l1audio_cust.h"
  #include "l1audio_defty.h"
#endif
  
#if (L1_GTT == 1)
  #include "l1gtt_const.h"
  #include "l1gtt_defty.h"
#endif

#include "l1_defty.h"
#include "l1_msgty.h"
#include "l1_tabs.h"

#include "l1tm_msgty.h"
#include "l1tm_varex.h"

#if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3))
  #include "spi_drv.h"
#endif   

#include "sys_types.h"
#include "general.h"
#include "l1_time.h"
#include "tpudrv.h"
#include "tpudrv10.h"
#include <string.h>

// Import band configuration from Flash module (need to replace by an access function)


// External function prototypes

void Cust_tm_tpu_table_write        (T_TM_RETURN *tm_return, WORD8 index, UWORD8 size, UWORD8 table[])
{
/*
	INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE
*/


    // fill in the cid
    tm_return->cid = TPU_TABLE_WRITE;

    switch (index)
    {
        default:
          tm_return->size = 0;
          tm_return->status = E_BADINDEX;
          break;
    } // end of switch
}

void Cust_tm_tpu_table_read         (T_TM_RETURN *tm_return, WORD8 index)
{
/*
	INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE
*/

    // fill in the cid
    tm_return->cid = TPU_TABLE_READ;

    switch (index)
    {
        default:
          tm_return->size = 0;
          tm_return->status = E_BADINDEX;
          break;
    } // end of switch
}

#endif //TESTMODE