FreeCalypso > hg > fc-magnetite
view src/cs/layer1/tm_include/l1tm_signa.h @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 22 Dec 2019 21:24:29 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1TM_SIGNA.H * * Filename l1tm_signa.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #define P_TMODE ( P_L1C + 3 ) // keep compatibility with GPRS code //TestMode #define TMODE_RXLEV_REQ ( ( P_TMODE << 8 ) | 1 ) #define TMODE_RXLEV_IND ( ( P_TMODE << 8 ) | 2 ) #define TMODE_STOP_RXLEV_CON ( ( P_TMODE << 8 ) | 3 ) #define TMODE_FB0_REQ ( ( P_TMODE << 8 ) | 4 ) #define TMODE_FB1_REQ ( ( P_TMODE << 8 ) | 5 ) #define TMODE_SB_REQ ( ( P_TMODE << 8 ) | 6 ) #define TMODE_FB_CON ( ( P_TMODE << 8 ) | 7 ) #define TMODE_SB_CON ( ( P_TMODE << 8 ) | 8 ) #define TMODE_BCCHS_CON ( ( P_TMODE << 8 ) | 9 ) #define TMODE_RA_START ( ( P_TMODE << 8 ) | 10 ) #define TMODE_RA_DONE ( ( P_TMODE << 8 ) | 11 ) #define TMODE_SCELL_NBCCH_REQ ( ( P_TMODE << 8 ) | 12 ) #define TMODE_STOP_SCELL_BCCH_REQ ( ( P_TMODE << 8 ) | 13 ) #define TMODE_NEW_SCELL_REQ ( ( P_TMODE << 8 ) | 14 ) #define TMODE_TCH_REQ ( ( P_TMODE << 8 ) | 15 ) #define TMODE_IMMED_ASSIGN_REQ ( ( P_TMODE << 8 ) | 16 ) #define TMODE_IMMED_ASSIGN_CON ( ( P_TMODE << 8 ) | 17 ) #define TMODE_STOP_RX_TX ( ( P_TMODE << 8 ) | 18 ) #define TMODE_SACCH_INFO ( ( P_TMODE << 8 ) | 19 ) #define TESTMODE_PRIM ( ( P_TMODE << 8 ) | 20 ) #define TMODE_FB_SB_REQ ( ( P_TMODE << 8 ) | 21 ) #define TMODE_NETWORK_SYNC_IND ( ( P_TMODE << 8 ) | 22 ) #define TMODE_TCH_INFO ( ( P_TMODE << 8 ) | 23 ) #if L1_GPRS #define TMODE_PDTCH_ASSIGN_REQ ( ( P_TMODE << 8 ) | 24 ) #define TMODE_PDTCH_INFO ( ( P_TMODE << 8 ) | 25 ) #endif // #define TMODE_RXLEV_REQ ( ( P_TMODE << 8 ) | 24 ) // #define TMODE_RXLEV_IND ( ( P_TMODE << 8 ) | 25 )