FreeCalypso > hg > fc-magnetite

view src/cs/layer1/tpu_drivers/p_source0/p_tpudr10.c @ 624:012028896cfb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 74af3c360866
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 *
 *        Filename p_tpudr10.c
 *  Copyright 2003 (C) Texas Instruments
 *
 ************* Revision Controle System Header *************/

#include "l1_macro.h"
#include "l1_confg.h"

#if L1_GPRS

#include "sys_types.h"
#include "iq.h"
#include "l1_const.h"
#include "l1_types.h"

#if TESTMODE
  #include "l1tm_defty.h"
#endif

#if (AUDIO_TASK == 1)
  #include "l1audio_const.h"
  #include "l1audio_cust.h"
  #include "l1audio_defty.h"
#endif

#if (L1_GTT == 1)
  #include "l1gtt_const.h"
  #include "l1gtt_defty.h"
#endif

#if (L1_MP3 == 1)
  #include "l1mp3_defty.h"
#endif

#if (L1_MIDI == 1)
  #include "l1midi_defty.h"
#endif

#if (L1_AAC == 1)
  #include "l1aac_defty.h"
#endif

#include "l1_defty.h"
#include "l1_time.h"
#include "tpudrv.h"
#include "tpudrv10.h"
#include "armio.h"


// external function prototypes

void l1dmacro_rx_up (void);
void l1dmacro_rx_down (WORD32 t);

void l1dmacro_tx_up (void);
void l1dmacro_tx_down (WORD32 time, BOOL tx_flag, UWORD8  adc_active);

// external variables and tables
extern SYS_UWORD16      *TP_Ptr;


/**************************************************************************/
/**************************************************************************/
/*                    EXTERNAL FUNCTIONS CALLED BY LAYER1                 */
/*                          COMMON TO L1 and TOOLKIT                      */
/**************************************************************************/
/**************************************************************************/

/*------------------------------------------*/
/*            l1dmacro_tx_synth             */
/*------------------------------------------*/
/*      programs RF synth for transmit      */
/*      programs OPLL for transmit          */
/*------------------------------------------*/
void l1pdmacro_tx_synth(SYS_UWORD16 radio_freq)
{
  l1dmacro_tx_synth(radio_freq);
}

/*------------------------------------------*/
/*            l1pdmacro_rx_up               */
/*------------------------------------------*/
/* Open window for normal burst reception   */
/*------------------------------------------*/
void l1pdmacro_rx_up (SYS_UWORD16 radio_freq)
{
    l1dmacro_rx_up();
}

/*------------------------------------------*/
/*            l1pdmacro_rx_down             */
/*------------------------------------------*/
/* Close window for normal burst reception  */
/*------------------------------------------*/
void l1pdmacro_rx_down (SYS_UWORD16 radio_freq, UWORD8 num_rx, BOOL rx_done_flag)
{
  l1dmacro_rx_down (RX_DOWN_TABLE[num_rx - 1]);
}

/*------------------------------------------*/
/*            l1pdmacro_tx_up               */
/*------------------------------------------*/
/* Open transmission window for normal burst*/
/*------------------------------------------*/
void l1pdmacro_tx_up (SYS_UWORD16 radio_freq)
{
  l1dmacro_tx_up();
}

/*-------------------------------------------*/
/*            l1pdmacro_tx_down              */
/*-------------------------------------------*/
/* Close transmission window for normal burst*/
/*-------------------------------------------*/
void l1pdmacro_tx_down (SYS_UWORD16 radio_freq, WORD16 time, BOOL tx_flag, UWORD8 timing_advance,UWORD8  adc_active)
{
  l1dmacro_tx_down (time, tx_flag, adc_active);
}

/*---------------------------------------------*/
/*       l1pdmacro_it_dsp_gen                  */
/*---------------------------------------------*/
/*       Generate IT to DSP                    */
/*---------------------------------------------*/
void l1pdmacro_it_dsp_gen(WORD16 time)
{
  // WARNING: 'time' must always be included between 0 and TPU_CLOCK_RANGE !!!

  *TP_Ptr++ = TPU_FAT   (time);
  *TP_Ptr++ = TPU_MOVE  (TPU_IT_DSP_PG,0x0001);
}

// TEMPORARY !!!!!

/*---------------------------------------------*/
/*       l1pdmacro_anchor                      */
/*---------------------------------------------*/
/*  Temporary macro used to program a TPU      */
/* scenario executed on the correct frame      */
/*---------------------------------------------*/
void l1pdmacro_anchor(WORD16 time)
{
  // WARNING: 'time' must always be included between 0 and TPU_CLOCK_RANGE !!!

   *TP_Ptr++ = TPU_FAT    (time);
}

#endif