FreeCalypso > hg > fc-magnetite
view src/cs/layer1/tpu_drivers/source/makefile_pc @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 22 Dec 2019 21:24:29 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
# Filename makefile_pc # Version 1.9 # Date 09/18/02 # # Makefile for GSM TPU drivers - PC version # # Copyright (c) Texas Instruments 1996 # # .SUFFIXES: .obj $(SUFFIXES) # Grab customer and rf id's #-------------------------- CUST=$(cust) RF=$(rf) CHIPSET=$(bsb) ANALOG=$(anl) DSP=$(dsp) BOARD=$(board) LONG_JUMP=$(ljump) TESTMODE=$(testmode) # Directories for PC system #---------------------------- ARMTOOLS =u:/470tools PTOOL_DIR =u:/470tools/ptool/tools CL470_0 = $(ARMTOOLS)/cl470 CL470_1 = $(PTOOL_DIR)/pcl470 CL470_2 = $(PTOOL_DIR)/vcl470 CL470 = $(CL470_$(LONG_JUMP)) AR470 =$(ARMTOOLS)/ar470 ASM470 =$(ARMTOOLS)/asm470 # Source code path #----------------- SOURCE=../source$(CUST) # Include file source paths #-------------------------- INCLUDE = \ -I../../nucleus/include \ -I../../include \ -I../../drivers1/common \ -I../source$(CUST) \ -I../../cust$(CUST) \ -I../../tm_include \ -I../../audio_include \ -I../../audio_cust$(CUST) \ -I../../hint DEPEND = $(SOURCE)/tpudrv$(RF).h \ ../../include/l1_time.h \ ../../drivers1/common/iq.h \ ../../cust$(CUST)/l1_rf$(RF).h \ tpudrv.h # Object files path #------------------ OBJ=$(SOURCE)/obj OBJS=obj_$(CHIPSET)_$(ANALOG) # EXECUTION TARGET #----------------- all: ../lib/tpudrv_$(CUST)_$(RF)_$(CHIPSET)_$(ANALOG)_$(DSP)_$(BOARD)_$(LONG_JUMP)_$(TESTMODE).lib clean: -rm obj/tpudrv.obj_$(ANALOG) $(OBJ)/tpudrv$(RF).obj_$(ANALOG)_$(BOARD) -rm ../lib/tpudrv_$(CUST)_$(RF)_$(ANALOG)_$(BOARD)_$(LONG_JUMP).lib # How to... #---------- #...generate the library #----------------------- ../lib/tpudrv_$(CUST)_$(RF)_$(CHIPSET)_$(ANALOG)_$(DSP)_$(BOARD)_$(LONG_JUMP)_$(TESTMODE).lib: obj/tpudrv.obj_$(CHIPSET)_$(ANALOG) $(OBJ)/tpudrv$(RF).obj $(AR470) r $@ obj/tpudrv.obj_$(CHIPSET)_$(ANALOG) $(OBJ)/tpudrv$(RF).obj #...generate the common object file #---------------------------------- obj/tpudrv.obj_$(CHIPSET)_$(ANALOG): $(DEPEND) tpudrv.c $(CL470) $(INCLUDE) -i$(ARMTOOLS) -dCHIPSET=$(bsb) -dANALOG=$(anl) -dDSP=$(dsp) -dLONG_JUMP=$(LONG_JUMP) -dTESTMODE=$(TESTMODE) -c -g -me -mt -mw -o2 -pw2 -fr obj -eo$(OBJS) tpudrv.c #...generate the target dependant object file #-------------------------------------------- $(OBJ)/tpudrv$(RF).obj: $(DEPEND) $(SOURCE)/tpudrv$(RF).c $(CL470) $(INCLUDE) -i$(ARMTOOLS) -dCHIPSET=$(bsb) -dANALOG=$(anl) -dDSP=$(dsp) -dBOARD=$(BOARD) -dLONG_JUMP=$(LONG_JUMP) -dTESTMODE=$(TESTMODE) -c -g -me -mt -mw -o2 -pw2 -fr$(OBJ) $(SOURCE)/tpudrv$(RF).c