FreeCalypso > hg > fc-magnetite
view src/cs/services/cst/cst.h @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 22 Dec 2019 21:24:29 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------+ | PROJECT : XXX SOURCE : CST.H | | AUTHOR : XXX VERSION: 1.0 | | CREATED : 01.02.99 STATE : code | +--------------------------------------------------------------------+ MODULE : CST PURPOSE : Definitions for the protocol stack entity CST. */ #ifndef CST_H #define CST_H #include "config/swconfig.cfg" #include "config/chipset.cfg" /*==== TEST =====================================================*/ /* * Dynamic Configuration Numbers */ #define ID_CONFIG 1 #define ID_MUTE 2 #define ID_GSM_PARAMETERS 11 #define ID_L1_PARAMETERS 12 /* * TIMER IDs */ #define T_RX 0 /* request of fieldstrength */ #define TMAX 0 /* must be the last one */ /* * Configuration Parameter */ #define TCST1 0 #define TCST2 1 #if (CHIPSET == 0) #define ARMIO_CLK 0x0001 #define RIF_CLKR 0x0002 #define RIF_CLKX 0x0004 #define RIF_CLK13 0x0010 #define UWIRE_CLK 0x0020 #define SIM_CLK 0x0040 #define TSP_CLK 0x0080 #define UART_CLK 0x0400 #endif #if ((CHIPSET == 2) || (CHIPSET == 3) || (CHIPSET == 4) || \ (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || \ (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || \ (CHIPSET == 11) || (CHIPSET == 12)) #define ARMIO_CLK_CUT 0x0001 #define UWIRE_CLK_CUT 0x0002 #endif // ADC timer expiration value defining the ADC period // with new frame all timer values are in ms not in tdma frames one TDMA approx 4.615 ms #define ADC_PERIOD 4615 #ifdef ALR //#define VM_BUFFER_SIZE 10240 // 10 seconds (1024 words for about 1 second of recording) #endif typedef struct { UBYTE t_mode; ULONG t_val; } T_TIMER_CONFIG; #ifdef OPTION_TIMER #define CST_TSTART(i,h,v) tim_start_timer(i,h,v) #else #define CST_TSTART(i,h,v) vsi_t_start(VSI_CALLER h,v) #endif #define TIMERSTART(i,v,h) csf_alloc_timer(i,v,&h) #define TIMERSTOP(h) csf_free_timer(h); h = VSI_ERROR; /*==== EXPORT =====================================================*/ /* * CST global data declarations */ #define CST_ADC_TIMER 0 /* * Prototypes Timer Modul */ /* * If all entities are linked into one module this definitions * prefixes all this functions with the enity name */ #ifdef OPTION_MULTITHREAD #define tim_init_timer _ENTITY_PREFIXED(tim_init_timer) #define tim_set_timeout_flag _ENTITY_PREFIXED(tim_set_timeout_flag) #define tim_handle_timeout _ENTITY_PREFIXED(tim_handle_timeout) #define tim_config_timer _ENTITY_PREFIXED(tim_config_timer) #define tim_get_config_timer _ENTITY_PREFIXED(tim_get_config_timer) #define tim_start_timer _ENTITY_PREFIXED(tim_start_timer) #define tim_flush_fifo _ENTITY_PREFIXED(tim_flush_fifo) #endif #ifdef OPTION_TIMER /* * If all entities are linked into one module this definitions * prefixes the global data with the entity name */ #ifdef OPTION_MULTITHREAD #define partab _ENTITY_PREFIXED(partab) #endif EXTERN KW_DATA partab[]; #endif /* * If all entities are linked into one module this definitions * prefixes the global data with the enity name */ #ifdef OPTION_MULTITHREAD #define hCommPL _ENTITY_PREFIXED(hCommPL) #define hCommL1 _ENTITY_PREFIXED(hCommL1) #endif EXTERN T_HANDLE hCommPL; /* Communication to TI++ */ EXTERN T_HANDLE hCommL1; /* Communication to Layer 1 */ EXTERN T_HANDLE cst_handle; /* * Prototypes Customer Spefific Functions Modul */ /* * If all entities are linked into one module this definitions * prefixes all this functions with the enity name */ GLOBAL void csf_adc_process (T_CST_ADC_IND *adc_results); EXTERN void adc_start (void); EXTERN void power_down_config (UBYTE sleep_mode, USHORT clocks); GLOBAL void csf_aec_enable (USHORT aec_ctrl_reg); #endif // CST_H