FreeCalypso > hg > fc-magnetite

view src/cs/services/etm/etm_audio_err.h @ 624:012028896cfb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/********************************************************************************
 * Enhanced TestMode (ETM)
 * @file	etm_audio_err.h (Support for AUDIO commands)
 *
 * @author	Kim T. Peteren (ktp@ti.com)
 * @version 0.1
 *

 *
 * History:
 *
 * 	Date       	Modification
 *  ------------------------------------
 *  30/06/2003	Creation
 *
 * (C) Copyright 2003 by Texas Instruments Incorporated, All Rights Reserved
 *********************************************************************************/

#ifndef _ETM_AUDIO_ERR_H_
#define _ETM_AUDIO_ERR_H_

/******************************************************************************
 * ERRORS
 *****************************************************************************/

// Module private (normally target-side) errors are in the range: [ -2..-47]
enum ETM_AUDIO_ERRORS_TG {
    ETM_AUDIO_FATAL = -3   // Fatal error
};

// Module private (normally PC-side) errors are in the range:     [-90..-99]
//enum ETM_AUDIO_ERRORS_PC {
 
//};

#endif // end of _ETM_AUDIO_ERR_H_