FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/ati_omcompat.c @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 22 Dec 2019 21:24:29 +0000 |
parents | 5e39123540e6 |
children |
line wrap: on
line source
/* * This module implements those AT commands that were originally invented * by Openmoko and have been retained in FreeCalypso. */ #ifndef ATI_OMCOMPAT_C #define ATI_OMCOMPAT_C #include "aci_all.h" #include <ctype.h> #include <string.h> #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "aci_io.h" #include "aci_cmd.h" #include "l4_tim.h" #include "line_edit.h" #include "aci_lst.h" #include "pcm.h" #include "audio.h" #include "aci.h" #include "rx.h" #include "pwr.h" #include "l4_tim.h" #ifdef GPRS #ifdef DTI #include "dti.h" #include "dti_conn_mng.h" #include "dti_cntrl_mng.h" #endif /* DTI */ #include "gaci.h" #include "gaci_cmh.h" #include "gaci_cmd.h" #endif /* GPRS */ #include "aci_mem.h" #include "aci_prs.h" #include "ati_int.h" #ifndef _SIMULATION_ #include "ffs/ffs.h" #endif #ifdef FF_ATI_BAT #include "typedefs.h" #include "gdd.h" #include "bat.h" #include "ati_bat.h" #endif /*FF_ATI_BAT*/ #include "audio/audio_api.h" #include "abb.h" #include "dar/dar_api.h" EXTERN void alr_get_band_of_serving_cell (char *strbuf); /* * PURPOSE : @ST command (Configure the sidetone level) */ GLOBAL T_ATI_RSLT atAtST (char *cl, UBYTE srcId) { char tmp[8]={0}; INT8 gain = -26; TRACE_FUNCTION("atAtST()"); /* * input functionality */ cl = parse(cl,"s", (LONG)8, tmp); gain = atoi(tmp); if ( cl ) { if ( gain == -23 || gain == -20 || gain == -17 || gain == -14 || gain == -11 || gain == -8 || gain == -5 || gain == -2 || gain == 1 || gain == -26 ) { Side_Tone_Write(gain); return (ATI_CMPL); } else { cmdCmsError(CMS_ERR_OpNotAllowed); return (ATI_FAIL); } } } GLOBAL T_ATI_RSLT queatAtST (char *cl, UBYTE srcId) { char *me="+ST: "; INT8 ST1; TRACE_FUNCTION("queatAtST()"); ST1 = Side_Tone_Read(); sprintf(g_sa,"%s%d",me,ST1); io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT); return (ATI_CMPL); } /* * PURPOSE : @POFF command (Power Off GSM Modem) */ GLOBAL T_ATI_RSLT atAtPOFF (char *cl, UBYTE srcId) { TRACE_FUNCTION("atAtPOFF"); sprintf(g_sa,"%s","OK"); io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT); ABB_Power_Off(); return (ATI_CMPL); } /* * PURPOSE : @RST command (Reset GSM Modem) */ GLOBAL T_ATI_RSLT atAtRST (char *cl, UBYTE srcId) { TRACE_FUNCTION("atAtRST"); dar_reset_system(); return (ATI_CMPL); } /* * PURPOSE : @BAND command (Get RF band) */ GLOBAL T_ATI_RSLT atAtBAND (char *cl, UBYTE srcId) { TRACE_FUNCTION("atAtBAND"); alr_get_band_of_serving_cell(g_sa); io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT); return (ATI_CMPL); } #endif /* ATI_OMCOMPAT_C */