view src/g23m-aci/aci/psa_gppps.c @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module defines the signalling functions of the
|             protocol stack adapter for GPRS Point-to-Point Protocol ( PPP ).
+----------------------------------------------------------------------------- 
*/ 

#if defined (GPRS) && defined (DTI)

#ifndef PSA_GPPPS_C
#define PSA_GPPPS_C
#endif

#include "aci_all.h"
/*==== INCLUDES ===================================================*/
#include "dti.h"      /* functionality of the dti library */
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "aci.h"
#include "psa.h"

#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"

#include "psa_gppp.h"

/*==== CONSTANTS ==================================================*/

#define TOK_STR     " =\t"          /* string of token delimiter */

/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/


/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+-------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : PSA_PPPS                |
| STATE   : finished              ROUTINE : psaGPPP_Establish       |
+-------------------------------------------------------------------+

  PURPOSE : request establishment of PPP connection

*/
GLOBAL void psaGPPP_Establish ( T_PPP_ESTABLISH_REQ *est_req )
{

  TRACE_FUNCTION ("psaGPPP_Establish()");

/*
 *-------------------------------------------------------------------
 * create and send primitive for establich PPP
 *-------------------------------------------------------------------
 */
  {
    PALLOC (ppp_establish_req, PPP_ESTABLISH_REQ);

    *ppp_establish_req = *est_req;

    PSEND (hCommPPP, ppp_establish_req);
  }
}

/*
+-------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : PSA_PPPS                |
| STATE   : finished              ROUTINE : psaGPPP_Terminate       |
+-------------------------------------------------------------------+

  PURPOSE : close the PPP connection

*/
GLOBAL void psaGPPP_Terminate ( UBYTE lower_layer )
{

  TRACE_FUNCTION ("psaGPPP_Terminate()");

/*
 *-------------------------------------------------------------------
 * create and send primitive for network attach
 *-------------------------------------------------------------------
 */
  {
    PALLOC (ppp_terminate_req, PPP_TERMINATE_REQ);

    /* fill in primitive parameter: registration mode */
    ppp_terminate_req -> lower_layer = lower_layer;
      
    PSEND (hCommPPP, ppp_terminate_req);
  }
}  

/*
+-------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : PSA_PPPS                |
| STATE   : finished              ROUTINE : psaGPPP_PDP_Activate    |
+-------------------------------------------------------------------+

  PURPOSE : the PDP context is activated (only in server mode)

*/
GLOBAL void psaGPPP_PDP_Activate ( T_NAS_ip * ip, UBYTE *pco_buf, UBYTE pco_length, U8 nsapi)
{

  TRACE_FUNCTION ("psaGPPP_PDP_Activate()");

/*
 *-------------------------------------------------------------------
 * create and send primitive for network attach
 *-------------------------------------------------------------------
 */

  {
    PALLOC_SDU (ppp_pdp_activate_res, PPP_PDP_ACTIVATE_RES, (USHORT)(pco_length << 3));

    /* Issue OMAPS00047332: SM, SNDCP and UPM are not supporting ppp_hc and msid.
     * these two parameter should only be removed after 
     * PPP SAP modification. till then reset it to 0.
     */
    ppp_pdp_activate_res->ppp_hc    = 0; 
    ppp_pdp_activate_res->msid      = 0; 

#ifdef _SIMULATION_
#pragma message("A check of the IP version is needed before starting a PPP connection.")
#endif
    ppp_pdp_activate_res->ip  = ip->ip_address.ipv4_addr.a4[0] << 24;
    ppp_pdp_activate_res->ip += ip->ip_address.ipv4_addr.a4[1] << 16;
    ppp_pdp_activate_res->ip += ip->ip_address.ipv4_addr.a4[2] <<  8;
    ppp_pdp_activate_res->ip += ip->ip_address.ipv4_addr.a4[3];
    ppp_pdp_activate_res->sdu.l_buf = pco_length << 3;
    ppp_pdp_activate_res->sdu.o_buf = 0;
    if ( pco_length )
    {
      memcpy(&ppp_pdp_activate_res->sdu.buf, pco_buf, pco_length);
    }

    PSEND (hCommPPP, ppp_pdp_activate_res);
  }
}  

/*
+-------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : PSA_PPPS                |
| STATE   : finished              ROUTINE : psaGPPP_PDP_Reject      |
+-------------------------------------------------------------------+

  PURPOSE : the PDP context can't activated (only in server mode)

*/
GLOBAL SHORT psaGPPP_PDP_Reject ( void )
{

  TRACE_FUNCTION ("psaGPPP_PDP_Reject()");


/*
 *-------------------------------------------------------------------
 * check owner id
 *-------------------------------------------------------------------
 */  
  if(!psa_IsVldOwnId((T_OWN)gpppShrdPrm.owner)) 
    
    return( -1 );

/*
 *-------------------------------------------------------------------
 * create and send primitive for network attach
 *-------------------------------------------------------------------
 */
      
  PSEND (hCommPPP, gpppShrdPrm.setPrm[gpppShrdPrm.owner].pdp_rej);

  return 0;
}  

/*
+-------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : PSA_PPPS                |
| STATE   : finished              ROUTINE : psaGPPP_Modification    |
+-------------------------------------------------------------------+

  PURPOSE : negotiate header compression again (only in server mode)

*/
/* NEEDED ???*/


/* LOCAL SHORT psaGPPP_Modification ( void )*/
/* {*/
 /* T_PPP_SET_PRM * pPrmSet;       *//* points to used parameter set */
 /* TRACE_FUNCTION ("psaGPPP_Modification()");*/

/*
 *-------------------------------------------------------------------
 * check owner id
 *-------------------------------------------------------------------
 */  
/*   if(!psa_IsVldOwnId(gpppShrdPrm.owner)) 
    
    return( -1 );

  pPrmSet = &gpppShrdPrm.setPrm[gpppShrdPrm.owner]; */

/*
 *-------------------------------------------------------------------
 * create and send primitive for network attach
 *-------------------------------------------------------------------
 */
/*  {
    PALLOC (ppp_modification_req, PPP_MODIFICATION_REQ);*/

    /* fill in primitive parameter: registration mode */
/*    ppp_modification_req -> ppp_hc    = pPrmSet -> ppp_hc;
    ppp_modification_req -> msid      = pPrmSet -> msid;
      
    PSEND (hCommPPP, ppp_modification_req);
  }

  return 0;
}*/

#endif  /* GPRS */
/*==== EOF ========================================================*/