view src/g23m-aci/aci/psa_mmis.c @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_MMI
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module defines the signalling functions of the 
|             protocol stack adapter for the man machine interface.
+----------------------------------------------------------------------------- 
*/ 

#ifndef PSA_MMIS_C
#define PSA_MMIS_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#ifdef FAX_AND_DATA
#include "aci_fd.h"
#endif    /* of #ifdef FAX_AND_DATA */

#include "aci.h"
#include "psa.h"
#include "psa_sms.h"
#include "psa_mmi.h"
#include "cmh.h"
#include "cmh_sms.h"
#include "cmh_mmi.h"

/*==== CONSTANTS ==================================================*/
#ifdef FF_HOMEZONE
#define CBHZ_ON_MSG_ID  0xDD
#define CBHZ_OFF_MSG_ID 0xFFFF
#endif /* HOMEZONE */

/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/


/*==== VARIABLES ==================================================*/


/*==== FUNCTIONS ==================================================*/

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIS                |
|                                 ROUTINE : psaMMI_Cbch             |
+-------------------------------------------------------------------+

  PURPOSE : cell broadcast channel request

*/

GLOBAL SHORT psaMMI_Cbch ( void )
{
  TRACE_FUNCTION ("psaMMI_Cbch()");

/*
 *-------------------------------------------------------------------
 * check owner id
 *-------------------------------------------------------------------
 */  
  if(!psa_IsVldOwnId(smsShrdPrm.cbmPrm.cbchOwner)) 
    
    return( -1 );

/*
 *-------------------------------------------------------------------
 * create and send primitive for CBCH request
 *-------------------------------------------------------------------
 */
  if (smsShrdPrm.cbmPrm.cbmHndl NEQ BM0)   /* only if NMI for CBM is set*/
  {
    PALLOC (mmi_cbch_req, MMI_CBCH_REQ);

    /* fill in primitive parameter: CBCH request */
    memcpy ( ( CHAR * ) mmi_cbch_req -> msg_id,
             ( CHAR * ) smsShrdPrm.cbmPrm.msgId,
             sizeof ( mmi_cbch_req -> msg_id ) );

    memcpy ( ( CHAR * ) mmi_cbch_req -> dcs_id,
             ( CHAR * ) smsShrdPrm.cbmPrm.dcsId,
             sizeof ( mmi_cbch_req -> dcs_id ) );

    mmi_cbch_req -> modus = smsShrdPrm.cbmPrm.cbmMode;

    PSENDX (PL, mmi_cbch_req);
  }
  else
  {
    PALLOC (mmi_cbch_req, MMI_CBCH_REQ);

    memset (mmi_cbch_req, NOT_PRESENT_8BIT, sizeof(T_MMI_CBCH_REQ));
    mmi_cbch_req -> modus = MMI_CBCH_STOP;

    PSENDX (PL, mmi_cbch_req);
  }
  return 0;
}

#ifdef FF_HOMEZONE
/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIS                |
|                                 ROUTINE : psaMMI_homezone_req     |
+-------------------------------------------------------------------+

  PURPOSE : homezone request

*/

GLOBAL SHORT psaMMI_homezone_req( void )
{
  TRACE_FUNCTION ("psaMMI_homezone_req()");

/*
 *-------------------------------------------------------------------
 * check owner id
 *-------------------------------------------------------------------
 */  
  if(!psa_IsVldOwnId(smsShrdPrm.cbmPrm.cbchOwner)) 
  {    
    return( -1 );
  }

/*
 *-------------------------------------------------------------------
 * create and send primitive for CBCH request
 *-------------------------------------------------------------------
 */

  {
    PALLOC (mmi_cbch_req, MMI_CBCH_REQ);

    memset (mmi_cbch_req, NOT_PRESENT_8BIT, sizeof(T_MMI_CBCH_REQ));
  
    /* fill in primitive parameter: CBCH request */
    mmi_cbch_req->modus     = CBCH_HOMEZONE;

    if ( smsShrdPrm.cbmPrm.hzMode EQ CBHZ_MOD_Active )
    {
      mmi_cbch_req->msg_id[0] = CBHZ_ON_MSG_ID;
    }
    else
    {
      mmi_cbch_req->msg_id[0] = CBHZ_OFF_MSG_ID;
    }

    mmi_cbch_req->dcs_id[0] = smsShrdPrm.cbmPrm.hzDcs;
    mmi_cbch_req->dcs_id[1] = smsShrdPrm.cbmPrm.hzTimeout;

    TRACE_EVENT_P2("MMI_CBCH_REQ: modus %d, msg_id %d", 
                    mmi_cbch_req->modus, mmi_cbch_req->msg_id[0]);

    PSENDX (PL, mmi_cbch_req);
  }
  return 0;
}
#endif /* FF_HOMEZONE */


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIS                |
|                                 ROUTINE : psaMMI_Display          |
+-------------------------------------------------------------------+

  PURPOSE : set the parameters for display request

*/

GLOBAL SHORT psaMMI_Display ( void )
{

  TRACE_FUNCTION ("psaMMI_Display()");

/*
 *-------------------------------------------------------------------
 * create and send primitive for display request 
 *-------------------------------------------------------------------
 */
  {
    PSENDX (PL, mmiShrdPrm.dspRq);
  }

  return 0;
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS                MODULE  : PSA_MMIS                |
|                                 ROUTINE : psaMMI_ConfigPrim       |
+-------------------------------------------------------------------+

  PURPOSE : send a config message to a entity

*/
#define CONFIG_STR 0x0

typedef struct
{
  char config_str[80];
} T_CONFIG_STR;


GLOBAL void psaMMI_ConfigPrim (T_HANDLE receiver_handle, 
                               char *config_msg)
{
  PALLOC (cfg_str, CONFIG_STR);

  D2P(cfg_str)->opc |= SYS_MASK;
  strcpy (cfg_str->config_str, config_msg);

  PSEND (receiver_handle, cfg_str);
}


/*==== EOF ========================================================*/