view src/g23m-aci/gdd_dio/gdd_dio_data.h @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       gdd_dio_data.h
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Internal data structures for entity gdd_dio (DIO BAT Adapter)
+----------------------------------------------------------------------------- 
*/ 

#ifndef GDD_DIO_DATA_H
#define GDD_DIO_DATA_H

/*==== INCLUDES =============================================================*/

/* DIO stuff */
#include "dio.h"  /* for T_DIO_CAP_PKT */

/* We must define P_DIO_H, in order to avoid inclusion of p_dio.h.
   This is necessary due to the special fact, that "dio.h", which is included
   in the header "dio_io/dio_drv.h", mirrors the header "p_dio.h". */
#define P_DIO_H

#include "gdd.h"

#include "gdd_dio_queue.h"  /* for T_GDD_BUF_QUEUE */


/*==== DEFINITIONS ==========================================================*/

#define GDD_CON_HANDLE_USER_MASK 0xFF000000


/*==== CONSTS ===============================================================*/

/*==== TYPES =================================================================*/

/**
 * States of kernel service
 */
typedef enum 
{
	GDD_DIO_KER_DEAD = 0,
  GDD_DIO_KER_INIT,
  GDD_DIO_KER_READY
} T_GDD_DIO_KER_STATE;


/**
 * Kernel service data
 */
typedef struct
{
  T_GDD_DIO_KER_STATE         state;
} T_GDD_DIO_KER_DATA;


/**
 * States of a single connection
 */
typedef enum
{
  GDD_DIO_CON_DEAD = 1,
  GDD_DIO_CON_CONNECT,
  GDD_DIO_CON_READY,
  GDD_DIO_CON_SENDING,
  GDD_DIO_CON_CLOSE
} T_GDD_DIO_CON_STATE;

/**
 * Connection data
 */
typedef struct 
{
  T_GDD_BUF_QUEUE			   rx_queue;       /* RX buffer queue */
  T_GDD_BUF_QUEUE				 tx_queue;       /* TX buffer queue */
  UBYTE                  con_state;      /* Connection state */
  UBYTE                  wait_send_buf;  /* Flag indicating that we wait for
                                            a send buffer */
  U32                    dio_device;     /* Dio device type */
  T_GDD_RECEIVE_DATA_CB  rcv_cb;         /* Receive callback of the client */
  T_GDD_SIGNAL_CB        sig_cb;         /* Signale callback of the client */
  T_DIO_CAP_PKT          dio_cap;        /* DIO capabilities */
} T_GDD_DIO_CON_DATA;

/**
 * DIO driver number
 */
typedef U32 T_GDD_DIO_DRV_NUM;


/*==== EXPORTS ===============================================================*/

int inst_num_from_dev_id(U32 device);


#endif /* !GDD_DIO_DATA_H */