view src/g23m-fad/l2r/tra.h @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 90eb61ecd093
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  CSD (8411)
|  Modul   :  tra.h
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the Protocol Stack Entity
|             TRA
+----------------------------------------------------------------------------- 
*/ 

#ifndef TRA_H
#define TRA_H

/*
 * States of the entity process MGT
 */
#define MGT_IDLE            0
#define MGT_INACTIVE        1
#define MGT_ACTIVE          2

 /*
 * States of the entity processes UP & DN
 */
#define UP_INACTIVE 0
#define UP_IDLE     1
#define UP_WAIT     2
#define UP_SEND     3

#define DN_INACTIVE 0
#define DN_IDLE     1
#define DN_WAIT     2
#define DN_SEND     3

/*==== TYPES ======================================================*/

/*
* derived constants
*/

/* global user specific constants */

#define FL_INACTIVE 0
#define FL_ACTIVE   1

/*
* Bitoffset for encoding/decoding, taken from RLP
*/
#define ENCODE_OFFSET 0

typedef enum
{
  NONTRANSP = 0,
  TRANSP    = 1
} T_MODE;


/*lint -e767 macro 'ENTITY_DATA' was defined differently in another module */
#define ENTITY_DATA tra_data

/*
 *  MANAGEMENT signal processing
 */
#ifdef OPTION_MULTITHREAD
#define sig_mgt_tra_up_send_break_req _ENTITY_PREFIXED(sig_mgt_tra_up_send_break_req)
#define sig_mgt_tra_up_break_req      _ENTITY_PREFIXED(sig_mgt_tra_up_break_req)
#define sig_mgt_tra_dn_break_req      _ENTITY_PREFIXED(sig_mgt_tra_dn_break_req)

#define sig_any_tra_dn_send_break_req _ENTITY_PREFIXED(sig_any_tra_dn_send_break_req)
#define sig_up_tra_mgt_break_ind      _ENTITY_PREFIXED(sig_up_tra_mgt_break_ind)
#define sig_dn_tra_mgt_break_ind      _ENTITY_PREFIXED(sig_dn_tra_mgt_break_ind)
#endif

EXTERN void sig_mgt_tra_up_send_break_req(USHORT break_len);
EXTERN void sig_mgt_tra_up_break_req(void);
EXTERN void sig_mgt_tra_dn_break_req(void);

EXTERN void sig_any_tra_dn_send_break_req (void);

EXTERN void sig_up_tra_mgt_break_ind(USHORT break_len);
EXTERN void sig_dn_tra_mgt_break_ind(U8 sa, U8 sb, U8 flow, USHORT break_len);

/*
 *  MANAGEMENT procedures
 */

EXTERN void send_tra_deactivate_cnf(void);
EXTERN void send_tra_dti_cnf(T_TRA_DTI_REQ *tra_dti_req);

/*
 *  DN signal processing
 */

#ifdef OPTION_MULTITHREAD
#define sig_mgt_tra_dn_dti_conn_setup _ENTITY_PREFIXED(sig_mgt_tra_dn_dti_conn_setup)
#define sig_mgt_tra_dn_dti_conn_open  _ENTITY_PREFIXED(sig_mgt_tra_dn_dti_conn_open)
#define sig_mgt_tra_dn_dti_disc       _ENTITY_PREFIXED(sig_mgt_tra_dn_dti_disc)
#endif

EXTERN void sig_mgt_tra_dn_dti_conn_setup(void);
EXTERN void sig_mgt_tra_dn_dti_conn_open(void);
EXTERN void sig_mgt_tra_dn_dti_disc(void);

/*
 *  DN procedures
 */
#ifdef OPTION_MULTITHREAD
#define dl_init                       _ENTITY_PREFIXED(dl_init)
#define rbm_init                      _ENTITY_PREFIXED(rbm_init)
#define dl_send_data_ind              _ENTITY_PREFIXED(dl_send_data_ind )
#define dl_prep_data_ind              _ENTITY_PREFIXED(dl_prep_data_ind)
#endif

EXTERN void dl_init(T_TRA_DN *ddl);
EXTERN void rbm_init(T_TRA_DN *ddl);

EXTERN BOOL dl_send_data_ind (void);
EXTERN void dl_prep_data_ind (T_FD *pFD);

/*
 *  UP signal processing
 */
#ifdef OPTION_MULTITHREAD
#define sig_mgt_tra_up_dti_conn_setup _ENTITY_PREFIXED(sig_mgt_tra_up_dti_conn_setup)
#define sig_mgt_tra_up_dti_conn_open _ENTITY_PREFIXED(sig_mgt_tra_up_dti_conn_open)
#define sig_mgt_tra_up_dti_disc _ENTITY_PREFIXED(sig_mgt_tra_up_dti_disc)
#endif

EXTERN void sig_mgt_tra_up_dti_conn_setup(void);
EXTERN void sig_mgt_tra_up_dti_conn_open(void);
EXTERN void sig_mgt_tra_up_dti_disc(void);

/*
 *  UP procedures
 */
#ifdef OPTION_MULTITHREAD
#define ul_init                   _ENTITY_PREFIXED(ul_init          )
#define snd_data_to_RA            _ENTITY_PREFIXED(snd_data_to_RA   )
#define snd_break_to_RA           _ENTITY_PREFIXED(snd_break_to_RA  )
#define up_start_dti_flow         _ENTITY_PREFIXED(up_start_dti_flow)
#endif

EXTERN void ul_init(T_TRA_UP *dul);
EXTERN void snd_data_to_RA();
EXTERN void snd_break_to_RA(USHORT break_len);
EXTERN void up_start_dti_flow(void);

EXTERN T_MODE l2r_data_mode;

/*
* number of signals (max. signalNum which occurs in pei_signal)
*/

EXTERN DTI_HANDLE l2r_hDTI; /* DTI connection handle for DTI library      */

EXTERN T_FD *tra_get_next_FrameDesc(void);

#endif