view src/g23m-fad/tcpip/rnet/rnet_dti_info.h @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 90eb61ecd093
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       rnet_dti_info.h
+------------------------------------------------------------------------------
|  Copyright 2003 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  DTI point-to-point network interface for RNET_RT,
|             Custom information
+----------------------------------------------------------------------------- 
*/ 

/* derived from... */
/**
 * @file    rnet_atp_info.h
 *
 * ATP point-to-point network interface for RNET_RT
 * Custom information
 *
 * @author  Regis Feneon
 * @version 0.1
 */

/*
 * $Id: rnet_atp_info.h,v 1.1 2002/09/06 08:39:52 rf Exp $
 * $Name:  $
 *
 * History:
 *
 *  Date        Author        Modification
 *  --------------------------------------------------
 *  6/9/2002    Regis Feneon  Create
 *
 */

#include "rnet_cfg.h"
#ifdef RNET_CFG_REAL_TRANSPORT

#ifndef __RNET_RT_DTI_INFO_H_
#define __RNET_RT_DTI_INFO_H_

#include "rnet_ip_addr.h"
#include "dcfg_api.h"

#define RNET_RT_DTI_MTU 1500

/*
 * DTI custom information
 */
typedef struct
{
  T_RNET_IP_ADDR local_addr ;   /* Local (MS) IP address. */
  T_RNET_IP_ADDR dest_addr ;    /* Destination (GGSN) IP address, this is also
                                 * the default router. */
  UINT16 mtu ;                  /* Maximum transmission unit. */
  T_RNET_IP_ADDR dns1 ;         /* Primary DNS server address. */
  T_RNET_IP_ADDR dns2 ;         /* Secondary DNS server address. */
  T_APPLI_USER IPU_id ;         /* Identity of the user of the channel. */
}
T_RNET_RT_DTI_CUSTOM_INFO ;

#endif /* __RNET_RT_DTI_INFO_H_ */
#endif /* RNET_CFG_REAL_TRANSPORT */

/* EOF */