FreeCalypso > hg > fc-magnetite
view src/g23m-gprs/llc/llc_par.h @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 22 Dec 2019 21:24:29 +0000 |
parents | 219afcfc6250 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Default values of the LLC layer parameters | (conforming to GSM 04.64) +----------------------------------------------------------------------------- */ #ifndef LLC_PAR_H #define LLC_PAR_H /* * Default values for the LLC layer parameters (conforming to GSM 04.64). */ #define LLC_VERSION_ALL_SAPIS 0 #define LLC_IOV_UI_ALL_SAPIS 0 /* * The default IOV-I values are calculated with the following formula: * 2^27 * SAPI */ #define LLC_IOV_I_SAPI_3 402653184L #define LLC_IOV_I_SAPI_5 671088640L #define LLC_IOV_I_SAPI_9 1207959552L #define LLC_IOV_I_SAPI_11 1476395008L /* * Timer values are negotiated in units of 0.1 seconds but are stored * in milliseconds. * NOTE: T201 uses value of T200. */ #define LLC_T200_SAPI_1 (50 * XID_TIMER_CONVERSION) #define LLC_T200_SAPI_3 (50 * XID_TIMER_CONVERSION) #define LLC_T200_SAPI_5 (100 * XID_TIMER_CONVERSION) #define LLC_T200_SAPI_7 (200 * XID_TIMER_CONVERSION) #define LLC_T200_SAPI_9 (200 * XID_TIMER_CONVERSION) #define LLC_T200_SAPI_11 (400 * XID_TIMER_CONVERSION) #define LLC_N200_SAPI_1 3 #define LLC_N200_SAPI_3 3 #define LLC_N200_SAPI_5 3 #define LLC_N200_SAPI_7 3 #define LLC_N200_SAPI_9 3 #define LLC_N200_SAPI_11 3 #define LLC_N201_U_SAPI_1 400 #define LLC_N201_U_SAPI_3 500 #define LLC_N201_U_SAPI_5 500 #define LLC_N201_U_SAPI_7 270 #define LLC_N201_U_SAPI_9 500 #define LLC_N201_U_SAPI_11 500 #define LLC_N201_I_SAPI_3 1503 #define LLC_N201_I_SAPI_5 1503 #define LLC_N201_I_SAPI_9 1503 #define LLC_N201_I_SAPI_11 1503 #define LLC_MD_SAPI_3 1520 #define LLC_MD_SAPI_5 760 #define LLC_MD_SAPI_9 380 #define LLC_MD_SAPI_11 190 #define LLC_MU_SAPI_3 1520 #define LLC_MU_SAPI_5 760 #define LLC_MU_SAPI_9 380 #define LLC_MU_SAPI_11 190 #define LLC_KD_SAPI_3 16 #define LLC_KD_SAPI_5 8 #define LLC_KD_SAPI_9 4 #define LLC_KD_SAPI_11 2 #define LLC_KU_SAPI_3 16 #define LLC_KU_SAPI_5 8 #define LLC_KU_SAPI_9 4 #define LLC_KU_SAPI_11 2 #endif /* LLC_PAR_H */