view src/g23m-gprs/sndcp/sndcp_nus.h @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 219afcfc6250
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  sndcp_nus.h
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for sndcp_nus.c 
+----------------------------------------------------------------------------- 
*/ 

/*---- HISTORY --------------------------------------------------------------*/
#if 0

  $Log:: /GPRS/Condat/MS/SRC/SNDCP/sndcp_nus.h                             $
 * 
 * 22    15.05.00 16:55 Hk
 * T H E   E N D.
 * 
 * 21    15.05.00 16:16 Hk
 * backup.
 * 
 * 20    9.05.00 18:59 Hk
 * XID negotiation work in progress. Backup.
 * 
 * 19    18.04.00 18:47 Hk
 * Backup. Work on XID negotiation.
 * 
 * 18    30.03.00 16:04 Hk
 * 
 * 17    17.03.00 18:03 Hk
 * Acknowledged data transfer is now implemented and tested uplink and
 * downlink.
 * 
 * 16    10.03.00 17:49 Hk
 * Backup. First downlink ack data transfer ok (case 700).
 * 
 * 15    7.03.00 18:24 Hk
 * Backup. Last check in before adding extra downlink service for timeout and
 * re-ordering. 
 * 
 * 14    25.02.00 18:27 Hk
 * Backup, test case 346 runs (deactivation of ack context including ll
 * release.
 * 
 * 13    17.02.00 14:32 Hk
 * Last checkin before maybe splitting sd in two services for 1.unack and 2.
 * ack op mode.
 * 
 * 12    11.02.00 18:49 Hk
 * Establishment of LLC acknowledged operation mode. First test case SNDCP035
 * successful. Backup.
 * 
 * 11    9.02.00 15:02 Hk
 * Backup. Unacknowledged data transfer possible. Up to testcase SNDCP034.
 * 
 * 10    7.02.00 18:02 Hk
 * Backup, error situations in service sd, up to testcase 028.
 * 
 * 9     3.02.00 18:08 Hk
 * Backup, downlink transfer up to test case 016.
 * 
 * 8     26.01.00 16:24 Hk
 * Made services sd and nd compilable.
 * 
 * 7     13.01.00 18:07 Hk
 * Backup. Test case SNDCP008 successful.
 * 
 * 6     7.01.00 18:09 Hk
 * Backup. Data transfer in service su in case of LL_READY_IND, test case
 * SNDCP005.
 * 
 * 5     4.01.00 18:56 Hk
 * Work on uplink data transfer, test case SNDCP003 successful.
 * 
 * 4     30.12.99 17:16 Hk
 * Last backup before millennium crash. Continued work on service su, data
 * transfer.
 * 
 * 3     29.12.99 17:21 Hk
 * Started to rework service su, queue of inoming sn_nuitdata_req prims will
 * be designed in more detail in SDL.
 * 
 * 2     28.12.99 18:18 Hk
 * Added test primitives with sdu instead of desc_list and started work on
 * data transfer.
 * 
 * 1     28.12.99 13:07 Hk
 * Initial.

#endif

#ifndef SNDCP_NUS_H
#define SNDCP_NUS_H


EXTERN void sig_mg_nu_reset (UBYTE nsapi, BOOL discard_ready);

EXTERN void sig_mg_nu_delete_npdus (UBYTE nsapi);

EXTERN void sig_mg_nu_delete_to (UBYTE nsapi, UBYTE npdu_num);
  
EXTERN void sig_mg_nu_reset_ack (UBYTE nsapi, UBYTE send_no, UBYTE rec_no, BOOL discard_ready);

EXTERN void sig_mg_nu_recover (UBYTE nsapi);

EXTERN void sig_mg_nu_resume (UBYTE nsapi);

EXTERN void sig_mg_nu_reset_ind (UBYTE nsapi);

EXTERN void sig_mg_nu_suspend (UBYTE nsapi);

EXTERN void sig_su_nu_ready_ind (UBYTE nsapi);

EXTERN void sig_sua_nu_data_cnf (UBYTE nsapi, UBYTE npdu_number);

EXTERN void sig_sua_nu_ready_ind (UBYTE nsapi);



#endif /* !SNDCP_NUS_H */