FreeCalypso > hg > fc-magnetite

view src/g23m-gprs/sndcp/sndcp_sdp.h @ 624:012028896cfb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 219afcfc6250
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  sndcp_sdp.h
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for sndcp_sdp.c 
+----------------------------------------------------------------------------- 
*/ 

/*---- HISTORY --------------------------------------------------------------*/
#if 0

  $Log:: /GPRS/Condat/MS/SRC/SNDCP/sndcp_sdp.h                             $
 * 
 * 16    15.05.00 16:55 Hk
 * T H E   E N D.
 * 
 * 15    15.05.00 16:16 Hk
 * backup.
 * 
 * 14    9.05.00 18:59 Hk
 * XID negotiation work in progress. Backup.
 * 
 * 13    18.04.00 18:47 Hk
 * Backup. Work on XID negotiation.
 * 
 * 12    30.03.00 16:04 Hk
 * 
 * 11    17.03.00 18:03 Hk
 * Acknowledged data transfer is now implemented and tested uplink and
 * downlink.
 * 
 * 10    10.03.00 17:49 Hk
 * Backup. First downlink ack data transfer ok (case 700).
 * 
 * 9     7.03.00 18:24 Hk
 * Backup. Last check in before adding extra downlink service for timeout and
 * re-ordering. 
 * 
 * 8     25.02.00 18:27 Hk
 * Backup, test case 346 runs (deactivation of ack context including ll
 * release.
 * 
 * 7     17.02.00 14:32 Hk
 * Last checkin before maybe splitting sd in two services for 1.unack and 2.
 * ack op mode.
 * 
 * 6     11.02.00 18:49 Hk
 * Establishment of LLC acknowledged operation mode. First test case SNDCP035
 * successful. Backup.
 * 
 * 5     9.02.00 15:03 Hk
 * Backup. Unacknowledged data transfer possible. Up to testcase SNDCP034.
 * 
 * 4     7.02.00 18:02 Hk
 * Backup, error situations in service sd, up to testcase 028.
 * 
 * 3     3.02.00 18:08 Hk
 * Backup, downlink transfer up to test case 016.
 * 
 * 2     26.01.00 16:24 Hk
 * Made services sd and nd compilable.
 * 
 * 1     25.01.00 17:32 Hk
 * Initial.

#endif

#ifndef SNDCP_SDP_H
#define SNDCP_SDP_H


#endif /* !SNDCP_SDP_H */