FreeCalypso > hg > fc-magnetite
view src/gpf3/frame/esf_func.c @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 22 Dec 2019 21:24:29 +0000 |
parents | c41a534f33c6 |
children |
line wrap: on
line source
/* +------------------------------------------------------------------------------ | File: esf_func.c +------------------------------------------------------------------------------ | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Modul defines the ESF interface functions. +----------------------------------------------------------------------------- */ #ifndef __ESF_FUNC_C__ #define __ESF_FUNC_C__ #endif #undef TEST_ESF_REGISTER /*==== INCLUDES ===================================================*/ #ifdef _NUCLEUS_ /* the include of nucleus.h in this file is a dirty hack to mask the issue of different type definitions in typedefs.h nad nucleus.h. typedefs.h contains #if defined (NUCLEUS) to protect against double definition and must be included after nucleus.h */ #include "nucleus.h" #endif #include "typedefs.h" #include "glob_defs.h" #include "vsi.h" #include "os.h" #include "os_types.h" #include "header.h" #include "esf_func.h" #include "string.h" #include "stdio.h" /*==== TYPES ======================================================*/ /*==== CONSTANTS ==================================================*/ /*==== EXTERNALS ==================================================*/ #ifdef FF_OS_ONLY extern char esf_pool[]; extern int esf_pool_size; #endif /*==== VARIABLES ==================================================*/ #ifndef RUN_INT_RAM T_ESF_FUNC esf_func; #ifdef FF_OS_ONLY OS_HANDLE esf_pool_handle; #endif #else extern T_ESF_FUNC esf_func; extern void esf_register ( T_ESF_FUNC * func ); #endif /*==== LINT =======================================================*/ /*==== FUNCTIONS ==================================================*/ #ifdef TEST_ESF_REGISTER #ifndef RUN_INT_RAM void init_func1 ( void ) { #ifndef _TARGET_ printf ("%s\n","ESF inif_func1 called"); #endif } #endif #ifndef RUN_INT_RAM void init_func2 ( void ) { #ifndef _TARGET_ printf ("%s\n","ESF inif_func2 called"); #endif } #endif #ifndef RUN_INT_RAM void send_prim ( T_PRIM_HEADER * prim ) { #ifndef _TARGET_ printf ("%s\n","ESF send_prim called"); #endif } #endif #ifndef RUN_INT_RAM T_ESF_FUNC esf_functions = { ESF_INITIALIZED, init_func1, init_func2, send_prim }; #endif #endif #ifdef FF_OS_ONLY #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : OS_FRM | | STATE : code ROUTINE : esf_task_entry | +--------------------------------------------------------------------+ PURPOSE : entry function for the ESF helping task. */ GLOBAL void esf_task_entry (OS_HANDLE TaskHandle, ULONG Value) { /* call second ESF init function */ esf_init_func2(); /* suspend helping task forever */ for(;;) { os_SuspendTask(TaskHandle,10000); } } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : OS_FRM | | STATE : code ROUTINE : StartFrame | +--------------------------------------------------------------------+ PURPOSE : this is called by ESF. */ SHORT StartFrame ( void ) { OS_HANDLE esf_task_handle; os_Initialize(); /* set the OS tick to 10ms */ os_set_tick(SYSTEM_TICK_10_MS); /* create memory pool for temporary usage during ESF partition pool creation and HISR stacks */ os_CreateMemoryPool (OS_NOTASK, "ESF_POOL", &esf_pool, esf_pool_size, &esf_pool_handle); /* tell this pool handle to the OS layer */ os_SetPoolHandles (esf_pool_handle, esf_pool_handle); /* create a helping task that calls esf_init2() from task context */ os_CreateTask (OS_NOTASK, "ESF_TASK", esf_task_entry, 1024, 255, &esf_task_handle, esf_pool_handle); /* and start it */ os_StartTask (OS_NOTASK, esf_task_handle, 0); esf_init(); /* call fist ESF init function */ esf_init_func1(); return OS_OK; } #endif #endif /* FF_OS_ONLY */ #ifndef RUN_INT_RAM /* +------------------------------------------------------------------------------ | Function : esf_init +------------------------------------------------------------------------------ | Description : initialize ESF API function pointer table. | | Parameters : void | | Return : void +------------------------------------------------------------------------------ */ void esf_init ( void ) { #ifdef TEST_ESF_REGISTER esf_register ( &esf_functions ); #endif if ( esf_func.magic_nr != ESF_INITIALIZED ) { esf_func.init_func1 = NULL; esf_func.init_func2 = NULL; esf_func.send_prim = NULL; } } #endif #ifndef RUN_INT_RAM /* +------------------------------------------------------------------------------ | Function : esf_register +------------------------------------------------------------------------------ | Description : register the ESF API functions. | | Parameters : func - pointer to API function pointer table | | Return : void +------------------------------------------------------------------------------ */ void esf_register ( T_ESF_FUNC * func ) { esf_func.init_func1 = func->init_func1; esf_func.init_func2 = func->init_func2; esf_func.send_prim = func->send_prim; esf_func.magic_nr = ESF_INITIALIZED; } #endif #ifndef RUN_INT_RAM /* +------------------------------------------------------------------------------ | Function : esf_init_func1 +------------------------------------------------------------------------------ | Description : call first ESF init function | | Parameters : void | | Return : void +------------------------------------------------------------------------------ */ void esf_init_func1 ( void ) { if ( esf_func.init_func1 != NULL ) { esf_func.init_func1 (); } } #endif #ifndef RUN_INT_RAM /* +------------------------------------------------------------------------------ | Function : esf_init_func2 +------------------------------------------------------------------------------ | Description : call second ESF init function | | Parameters : void | | Return : void +------------------------------------------------------------------------------ */ void esf_init_func2 ( void ) { if ( esf_func.init_func2 != NULL ) { esf_func.init_func2 (); } } #endif #ifndef RUN_FLASH /* +------------------------------------------------------------------------------ | Function : esf_send_prim +------------------------------------------------------------------------------ | Description : call ESF send primitive function | | Parameters : void | | Return : void +------------------------------------------------------------------------------ */ void esf_send_prim ( T_PRIM_HEADER * prim ) { if ( esf_func.send_prim != NULL ) { esf_func.send_prim ( prim ); } } #endif