view src/ui3/mfw/mfw_tim.h @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents e8ddbb0837ed
children
line wrap: on
line source

/*
+--------------------------------------------------------------------+
| PROJECT: MMI-Framework (8417)         $Workfile:: mfw_tim.h       $|
| $Author:: Es  $ CONDAT GmbH           $Revision:: 8               $|
| CREATED: 21.09.98                     $Modtime:: 2.03.00 11:50    $|
| STATE  : code                                                      |
+--------------------------------------------------------------------+

   MODULE  : MFW_TIM

   PURPOSE : Timer types & constants

   EXPORT  :

   TO DO   :

   $History:: mfw_tim.h                                             $
 * 
 * *****************  Version 8  *****************
 * User: Es           Date: 3.03.00    Time: 12:10
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * timStart(), timSignal() etc.: safer handling of simultaneous
 * timeouts; additional chain in timer control block.
 *
 * *****************  Version 7  *****************
 * User: Nm           Date: 18.02.00   Time: 12:34
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * change the name timSetup to
 * timSetTime
 *
 * *****************  Version 6  *****************
 * User: Nm           Date: 18.02.00   Time: 12:21
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * add timSetup()
 *
 * *****************  Version 5  *****************
 * User: Es           Date: 14.06.99   Time: 12:14
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 4  *****************
 * User: Es           Date: 17.02.99   Time: 19:11
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 3  *****************
 * User: Es           Date: 14.01.99   Time: 17:19
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 2  *****************
 * User: Es           Date: 23.12.98   Time: 16:19
 * Updated in $/GSM/DEV/MS/SRC/MFW
*/

#ifndef _DEF_MFW_TIM_H_
#define _DEF_MFW_TIM_H_

typedef struct MfwTimTag                /* TIMER CONTROL BLOCK      */
{
    S32 time;                           /* timeout time             */
    S32 left;                           /* time left before timeout */
    MfwCb handler;                      /* event handler            */
    struct MfwTimTag *next;             /* next in active chain     */
    struct MfwTimTag *next2;            /* next in timeout chain    */
    // PATCH LE 06.06.00
    // add pointer to MFW header element
    MfwHdr * mfwHeader;                /* Associated header.  SPR#1597 - SH - Change mfw_header to mfwHeader */
    // END PATCH LE 06.06.00
} MfwTim;

                                        /* PROTOTYPES               */
MfwRes timInit (void);
MfwRes timExit (void);
MfwHnd timCreate (MfwHnd w, S32 t, MfwCb f);
MfwRes timDelete (MfwHnd h);
MfwRes timStart (MfwHnd tim);
MfwRes timStop (MfwHnd tim);
MfwRes timSetTime (MfwHnd tim, S32 t);
S32 timTime (MfwHnd h);
void timSignal (void);

/* Added to remove warning */
EXTERN UBYTE dspl_Enable (UBYTE   in_Enable);

#endif