FreeCalypso > hg > fc-magnetite
view blobs/patches/main-pirelli.patch @ 639:026c98f757a6
tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only
As it turns out, there exist two different Huawei-made hw platforms both
bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT.
The two are NOT fw-compatible: aside from flash chip differences which
should be handled by autodetection, the two hw platforms are already known
to have different RFFEs with different control signals, and there may be
other differences not yet known. Our current gtm900 build target is for
MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence
no support for that version will be possible until and unless someone
provides one.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 18:19:01 +0000 |
parents | 8dd671b7d41e |
children |
line wrap: on
line source
# This patch applies to the Init_Target() function in the init.obj module in # main.lib; the present version is for making TCS211 run on the Pirelli. # This patch sets the same memory and peripheral chip select timings and # widths as Pirelli's fw. [init.obj] # value goes into nCS0, nCS1 and nCS3 config registers .text 66 A4 # the nCS2 setting in our original blob is already correct for the Pirelli # value goes into nCS4 config reg .text 72 A7 # nop out the write into 0x02700000 .text 128 C0 .text 129 46