view cdg-hybrid/cdginc/p_dcm.val @ 639:026c98f757a6

tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only As it turns out, there exist two different Huawei-made hw platforms both bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT. The two are NOT fw-compatible: aside from flash chip differences which should be handled by autodetection, the two hw platforms are already known to have different RFFEs with different control signals, and there may be other differences not yet known. Our current gtm900 build target is for MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence no support for that version will be possible until and unless someone provides one.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 18:19:01 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_dcm.val                                                      |
| SOURCE  : "sap\dcm.pdf"                                                  |
| LastModified : "2003-09-03"                                              |
| IdAndVersion : "8462.101.03.001"                                         |
| SrcFileTime  : "Thu Nov 29 09:39:32 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_DCM_VAL
#define P_DCM_VAL


#define CDG_ENTER__P_DCM_VAL

#define CDG_ENTER__FILENAME _P_DCM_VAL
#define CDG_ENTER__P_DCM_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_DCM_VAL__LAST_MODIFIED _2003_09_03
#define CDG_ENTER__P_DCM_VAL__ID_AND_VERSION _8462_101_03_001

#define CDG_ENTER__P_DCM_VAL__SRC_FILE_TIME _Thu_Nov_29_09_39_32_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_DCM_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_bearer_select
 */
#define DCM_SOCK_BEARER_ANY            (0x1)      /* DCM will decide which connection type to be used */
#define DCM_SOCK_BEARER_GPRS           (0x2)      /* Use a GPRS context as bearer, DCM will decide which GPRS settings to be used */
#define DCM_SOCK_BEARER_GSM            (0x3)      /* Use GSM data connection as bearer DCM will decide which GSM settings to be used */
#define DCM_SOCK_BEARER_USE_PROFILE    (0x4)      /* Use a specific data account for this connection */
#define DCM_SOCK_BEARER_AS_SPECIFIED   (0x5)      /* Use the data account information which is which is delivered within this signal */

/*
 * Value constants for VAL_authtype
 */
#define DCM_SOCK_AUTH_PAP              (0x1)      /* PAP authentification protocol  */
#define DCM_SOCK_AUTH_CHAP             (0x2)      /* CHAP authentification protocol !!! NOT SUPPORTED */
#define DCM_SOCK_AUTH_NO               (0x3)      /* No authentication              */

/*
 * Value constants for VAL_result
 */
#define DCM_RET_OK                     (0x0)      /* The action has been performed successfully. */
#define DCM_RET_NOT_READY              (0x1)      /* The command can not be processed now. */
#define DCM_RET_ALREADY_ACTIVATED      (0x2)      /* Connection refused because already actuvated. */
#define DCM_RET_UNKNOWN_EVENT          (0x3)      /* Unknown receipt event.         */
#define DCM_RET_INVALID_PARAMETER      (0x4)      /* A parameter is wrong.          */
#define DCM_RET_CMD_PENDING            (0x5)      /* There is a pending command yet. */
#define DCM_RET_PS_CONN_BROKEN         (0x6)      /* Loose of bearer connection.    */

/*
 * user defined constants
 */
#define CDCM_APN_MAX_LEN               (0x64)     
#define CDCM_PHONE_NR_LEN              (0x54)     
#define CDCM_PDP_MAX_LEN               (0x14)     
#define CDCM_GATE_MAX_LEN              (0x14)     
#define CDCM_USER_MAX_LEN              (0x19)     
#define CDCM_PASSWORD_MAX_LEN          (0x19)     
#define CDCM_DNS_MAX_LEN               (0x14)     

#include "CDG_LEAVE.h"


#endif