view cdg3/cdginc-locosto/m_ss.val @ 639:026c98f757a6

tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only As it turns out, there exist two different Huawei-made hw platforms both bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT. The two are NOT fw-compatible: aside from flash chip differences which should be handled by autodetection, the two hw platforms are already known to have different RFFEs with different control signals, and there may be other differences not yet known. Our current gtm900 build target is for MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence no support for that version will be possible until and unless someone provides one.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 18:19:01 +0000
parents c15047b3d00d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : m_ss.val                                                       |
| SOURCE  : "msg\ss.mdf"                                                   |
| LastModified : "2003-02-04"                                              |
| IdAndVersion : "6147.601.97.104"                                         |
| SrcFileTime  : "Wed Nov 28 10:21:24 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:52 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef M_SS_VAL
#define M_SS_VAL


#define CDG_ENTER__M_SS_VAL

#define CDG_ENTER__FILENAME _M_SS_VAL
#define CDG_ENTER__M_SS_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__M_SS_VAL__LAST_MODIFIED _2003_02_04
#define CDG_ENTER__M_SS_VAL__ID_AND_VERSION _6147_601_97_104

#define CDG_ENTER__M_SS_VAL__SRC_FILE_TIME _Wed_Nov_28_10_21_24_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__M_SS_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_ver
 */
#define SS_VERSION_PHASE2              (0x0)      /* phase 2 service and error handling, ellipsis notation */

/*
 * Value constants for VAL_cs
 */
#define CAUSE_UNASSIGN                 (0x1)      /* Unassigned (unallocated) Note 9 number */
#define CAUSE_NO_ROUTE                 (0x3)      /* No route to destination        */
#define CAUSE_CHAN_UNACCEPT            (0x6)      /* Channel unacceptable           */
#define CAUSE_BARRED                   (0x8)      /* Operator determined barring    */
#define CAUSE_CALL_CLEAR               (0x10)     /* Normal call clearing           */
#define CAUSE_USER_BUSY                (0x11)     /* User busy                      */
#define CAUSE_NO_RESPONSE              (0x12)     /* No user responding             */
#define CAUSE_ALERT_NO_ANSWER          (0x13)     /* User alerting, no answer       */
#define CAUSE_CALL_REJECT              (0x15)     /* Call rejected                  */
#define CAUSE_NUM_CHANGED              (0x16)     /* Number changed                 */
#define CAUSE_PREEMPTION               (0x19)     /* Pre-emption                    */
#define CAUSE_USER_CLEAR               (0x1a)     /* Non selected user clearing     */
#define CAUSE_DEST_ORDER               (0x1b)     /* Destination out of order       */
#define CAUSE_NUM_FORMAT               (0x1c)     /* Invalid number format (incomplete number) */
#define CAUSE_FACILITY_REJECT          (0x1d)     /* Facility rejected              */
#define CAUSE_STATUS_ENQUIRY           (0x1e)     /* Response to STATUS ENQUIRY     */
#define CAUSE_UNSPECIFIED              (0x1f)     /* Normal, unspecified            */
#define CAUSE_NO_CHAN_AVAIL            (0x22)     /* No circuit/channel available   */
#define CAUSE_NETWORK_ORDER            (0x26)     /* Network out of order           */
#define CAUSE_TEMP_FAIL                (0x29)     /* Temporary failure              */
#define CAUSE_SWITCH_CONGEST           (0x2a)     /* Switching equipment congestion */
#define CAUSE_INFO_DISCARD             (0x2b)     /* Access information discarded   */
#define CAUSE_REQ_CHAN_UNAVAIL         (0x2c)     /* requested circuit/channel not available */
#define CAUSE_RESOURCE_UNAVAIL         (0x2f)     /* Resources unavailable, unspecified */
#define CAUSE_QOS_UNAVAIL              (0x31)     /* Quality of service unavailable */
#define CAUSE_FACILITY_UNSUBSCRIB      (0x32)     /* Requested facility not subscribed */
#define CAUSE_BARRED_IN_CUG            (0x37)     /* Incoming calls barred within the CUG */
#define CAUSE_BEARER_CAP_AUTHORIZ      (0x39)     /* Bearer capability not authorized */
#define CAUSE_BEARER_CAP_UNAVAIL       (0x3a)     /* Bearer capability not presently available */
#define CAUSE_SERVICE_UNAVAIL          (0x3f)     /* Service or option not available, unspecified */
#define CAUSE_BEARER_NOT_IMPLEM        (0x41)     /* Bearer service not implemented */
#define CAUSE_ACM_MAX                  (0x44)     /* ACM equal to or greater than ACMmax */
#define CAUSE_FACILITY_NOT_IMPLEM      (0x45)     /* Requested facility not implemented */
#define CAUSE_RESTICT_BEARER_CAP       (0x46)     /* Only restricted digital information bearer capability is available */
#define CAUSE_SERVICE_NOT_IMPLEM       (0x4f)     /* Service or option not implemented, unspecified */
#define CAUSE_INVALID_TI               (0x51)     /* Invalid transaction identifier value */
#define CAUSE_USER_NOT_IN_CUG          (0x57)     /* User not member of CUG         */
#define CAUSE_INCOMPAT_DEST            (0x58)     /* Incompatible destination       */
#define CAUSE_INVALID_TRANS_NET        (0x5b)     /* Invalid transit network selection */
#define CAUSE_INCORRECT_MESSAGE        (0x5f)     /* Semantically incorrect message */
#define CAUSE_INVALID_MAND_INFO        (0x60)     /* Invalid mandatory information  */
#define CAUSE_MESSAGE_TYPE_NOT_IMPLEM  (0x61)     /* Message type non-existent or not implemented */
#define CAUSE_MESSAGE_TYPE_INCOMPAT    (0x62)     /* Message type not compatible with protocol state */
#define CAUSE_INFO_ELEM_NOT_IMPLEM     (0x63)     /* Information element non existent or not implemented */
#define CAUSE_COND_INFO_ELEM           (0x64)     /* Conditional IE error           */
#define CAUSE_MESSAGE_INCOMPAT         (0x65)     /* Message not compatible with protocol state */
#define CAUSE_TIMER                    (0x66)     /* Recovery on timer expiry       */
#define CAUSE_PROTOCOL                 (0x6f)     /* Protocol error, unspecified    */
#define CAUSE_INTERWORKING             (0x7f)     /* Interworking, unspecified      */

/*
 * Value constants for VAL_cs2
 */
#define CS_Q931                        (0x0)      /* standardized coding as described in CCITT Rec. Q.931 */
#define CS_INTERNATIONAL               (0x1)      /* reserved for other international standards */
#define CS_NATIONAL                    (0x2)      /* national standard              */
#define CS_GSM_PLMN                    (0x3)      /* standard defined for the GSM PLMNS as described in 10.86/GSM 04.08 */

/*
 * Value constants for VAL_loc
 */
#define VAL_LOC___DEF                  (0x0)      /* reserved                       */
#define LOC_USER                       (0x0)      /* user                           */
#define LOC_PRIV_NET_LOCAL_USER        (0x1)      /* private network serving the local user */
#define LOC_PUB_NET_LOCAL_USER         (0x2)      /* public network serving the local user */
#define LOC_TRANSIT_NET                (0x3)      /* transit network                */
#define LOC_PUB_NET_REMOTE_USER        (0x4)      /* public network serving the remote user */
#define LOC_PRIV_NET_REMOTE_USER       (0x5)      /* private network serving the remote user */
#define LOC_INTERNATIONAL_NET          (0x7)      /* international network          */
#define LOC_BEYOND_POINT               (0xa)      /* network beyond interworking point */

/*
 * user defined constants
 */
#define L3MAX                          (0xfb)     
#define MAX_SS_VERSION                 (0x1)      

#include "CDG_LEAVE.h"


#endif