FreeCalypso > hg > fc-magnetite
view scripts/config-headers-new.sh @ 639:026c98f757a6
tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only
As it turns out, there exist two different Huawei-made hw platforms both
bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT.
The two are NOT fw-compatible: aside from flash chip differences which
should be handled by autodetection, the two hw platforms are already known
to have different RFFEs with different control signals, and there may be
other differences not yet known. Our current gtm900 build target is for
MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence
no support for that version will be possible until and unless someone
provides one.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 18:19:01 +0000 |
parents | 92dbfa906f66 |
children | 8cf3029429f3 |
line wrap: on
line source
#!/bin/sh if [ -z "$TARGET" ] then echo "Error: TARGET= must be passed via environment" 1>&2 exit 1 fi if [ -z "$BUILD_DIR" ] then echo "Error: BUILD_DIR= must be passed via environment" 1>&2 exit 1 fi # The following vars will already be set when this script is invoked # from configure.sh in a production build, but the following defaulting logic # helps with manual invokation during development. if [ -z "$CHIPSET" ] then CHIPSET=10 fi export CHIPSET if [ -z "$DSP" ] then DSP=36 fi export DSP if [ -z "$RF" ] then RF=12 fi export RF if [ -z "$AMR" ] then AMR=1 fi export AMR if [ -z "$L1_DYN_DSP_DWNLD" ] then L1_DYN_DSP_DWNLD=1 fi export L1_DYN_DSP_DWNLD if [ -z "$L1_VOICE_MEMO_AMR" ] then L1_VOICE_MEMO_AMR=1 fi export L1_VOICE_MEMO_AMR if [ -z "$MELODY_E2" ] then MELODY_E2=1 fi export MELODY_E2 if [ -z "$SPEECH_RECO" ] then SPEECH_RECO=1 fi export SPEECH_RECO if [ -z "$GPRS" ] then GPRS=1 fi export GPRS if [ -z "$SRVC" ] then SRVC=1 fi export SRVC if [ -z "$ATP_STATE" ] then ATP_STATE=0 fi export ATP_STATE if [ -z "$FCHG_STATE" ] then FCHG_STATE=1 fi export FCHG_STATE if [ -z "$LCC_STATE" ] then LCC_STATE=0 fi export LCC_STATE if [ -z "$MKS_STATE" ] then MKS_STATE=0 fi export MKS_STATE if [ -z "$PWR_STATE" ] then PWR_STATE=0 fi export PWR_STATE if [ -z "$R2D_STATE" ] then R2D_STATE=1 fi export R2D_STATE if [ -z "$DSAMPLE_FULL_COLOR" ] then DSAMPLE_FULL_COLOR=1 fi export DSAMPLE_FULL_COLOR if [ -z "$TR_BAUD_CONFIG" ] then TR_BAUD_CONFIG=TR_BAUD_115200 fi export TR_BAUD_CONFIG # Derived settings only for the generation of *.cfg headers case "$RF" in 10) RF_FAM=10 RF_PA=0 RF_PG=0 ;; 12) RF_FAM=12 RF_PA=2 RF_PG=2 ;; *) echo "Error: RF=$RF setting not understood" 1>&2 exit 1 esac export RF_FAM RF_PA RF_PG case "$GPRS" in 0) L1_GPRS=0 PMODE=1 ;; 1) L1_GPRS=1 PMODE=2 ;; *) echo "Error: GPRS=$GPRS setting not understood" 1>&2 exit 1 esac export L1_GPRS PMODE if [ "$SRVC" != 0 ] then IDS=1 else IDS=0 fi export IDS # do it! set -e rm -rf $BUILD_DIR/config mkdir $BUILD_DIR/config helpers/cfg-hdr-gen scripts/cfg-template $BUILD_DIR/config scripts/make-rv-swe-hdr.sh > $BUILD_DIR/config/rv_swe.h cp targets/$TARGET.h $BUILD_DIR/config/fc-target.h