FreeCalypso > hg > fc-magnetite
view src/aci2/ksd/ksd_utl.c @ 639:026c98f757a6
tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only
As it turns out, there exist two different Huawei-made hw platforms both
bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT.
The two are NOT fw-compatible: aside from flash chip differences which
should be handled by autodetection, the two hw platforms are already known
to have different RFFEs with different control signals, and there may be
other differences not yet known. Our current gtm900 build target is for
MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence
no support for that version will be possible until and unless someone
provides one.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 18:19:01 +0000 |
parents | 93999a60b835 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : KSD_UTL +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module defines utility functions for the KSD | component of the protocol stack. +----------------------------------------------------------------------------- */ #ifndef KSD_UTL_C #define KSD_UTL_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ /*==== CONSTANTS ==================================================*/ #define SUBADDR_DELIMITER '-' /* used to separate the subaddress */ /* from the main address */ #define NULL_TERM '\0' /* string termination */ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : KSD_UTL | | STATE : code ROUTINE : utl_cutInternational | +--------------------------------------------------------------------+ PURPOSE : This function cuts all characters which signals that the dial number is international (leading '+' or leading '00'). <dial>: the origin dial number <cuttedDial>: the dial number without leading '+' or '00' returns: TRUE if the dial number was of the type international, otherwise FALSE. */ LOCAL BOOL utl_cutInternational (CHAR* dial, CHAR** cuttedDial) { BOOL international = FALSE; /* holds whether number is */ /* international */ if (dial[0] EQ '+') { international = TRUE; *cuttedDial = dial + 1; } /* * 00 is not an indication for an international call else if (dial[0] EQ '0' AND dial[1] EQ '0') { international = TRUE; *cuttedDial = dial + 2; } */ else *cuttedDial = dial; return international; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : KSD_UTL | | STATE : code ROUTINE : utl_getValidDialchars | +--------------------------------------------------------------------+ PURPOSE : This function returns the number of valid dial characters in the buffer. This function is only used to process the subaddress part. <dial>: the dial number (subaddress) returns: the number of valid dial characters. */ LOCAL USHORT utl_getValidDialchars (CHAR* dial) { USHORT numChars = 0; /* holds number of valid dial characters */ USHORT i = 0; /* used for counting */ while (dial[i] NEQ NULL_TERM) { if ((dial[i] >= '0' AND dial[i] <= '9') OR (dial[i] >= 'A' AND dial[i] <= 'C') OR (dial[i] >= 'a' AND dial[i] <= 'c') OR dial[i] EQ '*' OR dial[i] EQ '#' ) numChars++; i++; } return numChars; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : KSD_UTL | | STATE : code ROUTINE : utl_splitDialnumber | +--------------------------------------------------------------------+ PURPOSE : This function splits a dial string into address and subaddress and delivers additional information about the specific types of addresses. <dial>: the origin dial number <main>: the main address of the dial number; if it was international, leading '+' or '00' are cutted <international>: TRUE if the dial number is international, otherwise FALSE <sub>: the sub address of the dial number or NULL if there is none <numCharsSub>: the number of valid dial characters of the sub address */ GLOBAL void utl_splitDialnumber (CHAR* dial, CHAR** main, BOOL* international, CHAR** sub, USHORT* numCharsSub) { CHAR* token; /* points to dial number */ if (dial NEQ NULL) { token = strchr (dial, SUBADDR_DELIMITER); if (token NEQ NULL) { *token = NULL_TERM; *sub = ++token; *numCharsSub = utl_getValidDialchars (token); } else { *sub = NULL; *numCharsSub = 0; } *international = utl_cutInternational (dial, main); } else { *main = NULL; *international = FALSE; *sub = NULL; *numCharsSub = 0; } } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : KSD_UTL | | STATE : code ROUTINE : utl_string2UByte | +--------------------------------------------------------------------+ PURPOSE : This function converts characters from a buffer to an unsigned byte value. <inUByte>: buffer containing the characters forming the unsigned byte value <inLen>: number of characters to be taken into account <outValue>: the converted value returns: TRUE if the conversion was successful, otherwise FALSE. */ GLOBAL BOOL utl_string2UByte (CHAR* inUByte, USHORT inLen, UBYTE* outValue) { UBYTE result = 0; /* holds the result value of conversion */ if (inLen EQ 0) return TRUE; while (inLen--) { result *= 10; if (*inUByte >= '0' AND *inUByte <= '9') result += *inUByte++ - '0'; else return FALSE; } *outValue = result; return TRUE; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : KSD_UTL | | STATE : code ROUTINE : utl_string2Byte | +--------------------------------------------------------------------+ PURPOSE : This function converts characters from a buffer to a signed byte value. <inByte>: buffer containing the characters forming the signed byte value <inLen>: number of characters to be taken into account <outValue>: the converted value returns: TRUE if the conversion was successful, otherwise FALSE. */ GLOBAL BOOL utl_string2Byte (CHAR* inByte, USHORT inLen, BYTE* outValue) { BYTE result = 0; /* holds the result value of conversion */ if (inLen EQ 0) return TRUE; while (inLen--) { result *= 10; if (*inByte >= '0' AND *inByte <= '9') result += *inByte++ - '0'; else return FALSE; } *outValue = result; return TRUE; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : KSD_UTL | | STATE : code ROUTINE : utl_string2Short | +--------------------------------------------------------------------+ PURPOSE : This function converts characters from a buffer to an short value. <inShort>: buffer containing the characters forming the short value <inLen>: number of characters to be taken into account <outValue>: the converted value returns: TRUE if the conversion was successful, otherwise FALSE. */ GLOBAL BOOL utl_string2Short (CHAR* inShort, USHORT inLen, SHORT* outValue) { SHORT result = 0; /* holds the result value of conversion */ if (inLen EQ 0) return TRUE; while (inLen--) { result *= 10; if (*inShort >= '0' AND *inShort <= '9') result += *inShort++ - '0'; else return FALSE; } *outValue = result; return TRUE; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : KSD_UTL | | STATE : code ROUTINE : utl_string2Long | +--------------------------------------------------------------------+ PURPOSE : This function converts characters from a buffer to an long value. <inLong>: buffer containing the characters forming the short value <inLen>: number of characters to be taken into account <outValue>: the converted value returns: TRUE if the conversion was successful, otherwise FALSE. */ GLOBAL BOOL utl_string2Long (CHAR* inLong, USHORT inLen, LONG* outValue) { LONG result = 0; /* holds the result value of conversion */ if (inLen EQ 0) return TRUE; while (inLen--) { result *= 10; if (*inLong >= '0' AND *inLong <= '9') result += *inLong++ - '0'; else return FALSE; } *outValue = result; return TRUE; }