view src/cs/drivers/drv_app/lcc/lcc_cfg_i.h @ 639:026c98f757a6

tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only As it turns out, there exist two different Huawei-made hw platforms both bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT. The two are NOT fw-compatible: aside from flash chip differences which should be handled by autodetection, the two hw platforms are already known to have different RFFEs with different control signals, and there may be other differences not yet known. Our current gtm900 build target is for MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence no support for that version will be possible until and unless someone provides one.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 18:19:01 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/******************************************************************************
 * Power Task (pwr)
 * Design and coding by Svend Kristian Lindholm, skl@ti.com
 *
 * PWR Configuration Variables NOT in FFS
 *
 * $Id: pwr_cfg_i.h 1.2 Wed, 20 Aug 2003 12:54:50 +0200 skl $
 *
 ******************************************************************************/

#ifndef _LCC_CFG_I_H_
#define _LCC_CFG_I_H_


// The charging current used in SW precharge state
#define ICHG_PRECHG  500

// The SW precharge start threshold - discriminator that decides between entering INI or PRE states
#define VBAT_PRECHG_START 3200

// The SW precharge stop threshold - PRE->INI state & FFS configuration files will be read
#define VBAT_PRECHG_STOP  3600

// Define how many consecutive charger unplugs we must detect in order to have a 'real' unplug
#define CONSECUTIVE_CHG_UNPLUGS 5

// Define the size of the exponential avg window when in PRE state (i.e. no FFS configuration is read)
#define PRECHG_AVG_WINDOW_SIZE  5

// Define the battery slip number before we read the battery id
#define BATTERY_TYPE_SLIP 4

// Define the charger slip number before we read the charger id
#define CHARGER_TYPE_SLIP 2

// Define the lower charger id out-of-bound value (mV)
#define CHARGER_TYPE_OUT_OF_BOUND_LOW 4000

// Define the 'typical' charger id that will be used if the charger id reading has failed
// Make sure it's in the charger voltage interval
#define CHARGER_TYPE_TYPICAL          4201

// The Q402 Vchg thresholds that decides a charger unplug when charging has been initiated
#define VCHG_Q402_THR  1000
#define ICHG_Q402_THR  20


#endif