FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_app/lcc/lcc_modulate.h @ 639:026c98f757a6
tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only
As it turns out, there exist two different Huawei-made hw platforms both
bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT.
The two are NOT fw-compatible: aside from flash chip differences which
should be handled by autodetection, the two hw platforms are already known
to have different RFFEs with different control signals, and there may be
other differences not yet known. Our current gtm900 build target is for
MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence
no support for that version will be possible until and unless someone
provides one.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 30 Jan 2020 18:19:01 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/****************************************************************************** * Power Task (pwr) * Design and coding by Svend Kristian Lindholm, skl@ti.com * * PWR SW Modulation * * $Id: pwr_modulate.h 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $ * ******************************************************************************/ #ifndef __LCC_MODULATE_H__ #define __LCC_MODULATE_H__ #include "lcc/lcc.h" #include "lcc/lcc_cfg.h" // SW modulation using the following addresses #if (USE_PWL_AS_MODULATOR == 1) // D-Sample - no modulation - just envelope function to simulate GPIO 6 #define PWL_LEVEL_REG (*(volatile unsigned char*) 0xFFFE8000) #define PWL_CTRL_REG (*(volatile unsigned char*) 0xFFFE8001) #define BUZZ_LIGHT_REG (*(volatile short*) 0xFFFE480E) // Enable buzzer (bit 0) and PWL (bit 1) #endif /****************************************************************************** * Function prototypes ******************************************************************************/ void pwr_modulate_init(void); void pwr_modulate_on(void); void pwr_modulate_off(void); #endif