FreeCalypso > hg > fc-magnetite
view src/cs/layer1/gtt_include/l1gtt_msgty.h @ 639:026c98f757a6
tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only
As it turns out, there exist two different Huawei-made hw platforms both
bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT.
The two are NOT fw-compatible: aside from flash chip differences which
should be handled by autodetection, the two hw platforms are already known
to have different RFFEs with different control signals, and there may be
other differences not yet known. Our current gtm900 build target is for
MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence
no support for that version will be possible until and unless someone
provides one.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 18:19:01 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1GTT_MSGTY.H * * Filename l1gtt_msgty.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #if (L1_GTT == 1) typedef struct { UWORD8 loop_type; // Type of loop to be closed } T_TST_CLOSE_GTT_LOOP_REQ; typedef struct { UWORD8 scen_type; // 1 = input on CTM Tx, 2 = input on Baudot encoder // SIMULATION ONLY: 3 = input on CTM Rx, 4 = input on Baudot decoder UWORD16 rate; // Number of frames (4.615 ms) between each new character arrival // for scen_type 3 and 4: GTT input file number } T_TST_START_GTT_TEST_REQ; #endif // L1_GTT