view src/cs/layer1/p_cfile/l1p_afun.c @ 639:026c98f757a6

tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only As it turns out, there exist two different Huawei-made hw platforms both bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT. The two are NOT fw-compatible: aside from flash chip differences which should be handled by autodetection, the two hw platforms are already known to have different RFFEs with different control signals, and there may be other differences not yet known. Our current gtm900 build target is for MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence no support for that version will be possible until and unless someone provides one.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 18:19:01 +0000
parents 0740b5ff15f6
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1P_AFUN.C
 *
 *        Filename l1p_afun.c
 *  Copyright 2003 (C) Texas Instruments
 *
 ************* Revision Controle System Header *************/

#define  L1P_AFUN_C

#include "l1_macro.h"
#include "l1_confg.h"

#if L1_GPRS

#if (CODE_VERSION == SIMULATION)
  #include <string.h>
  #include "l1_types.h"
  #include "sys_types.h"
  #include "l1_const.h"
  #if TESTMODE
    #include "l1tm_defty.h"
  #endif
  #if (AUDIO_TASK == 1)
    #include "l1audio_const.h"
    #include "l1audio_cust.h"
    #include "l1audio_defty.h"
  #endif  
  #if (L1_GTT == 1)
    #include "l1gtt_const.h"
    #include "l1gtt_defty.h"
  #endif
  #if (L1_MP3 == 1)
    #include "l1mp3_defty.h"
  #endif
  #if (L1_MIDI == 1)
    #include "l1midi_defty.h"
  #endif
  #include "l1_defty.h"
  #include "cust_os.h"
  #include "l1_varex.h"
  #include "l1p_cons.h"
  #include "l1p_msgt.h"
  #include "l1p_deft.h"
  #include "l1p_vare.h"

  #include "l1_msgty.h"
  #include "l1_proto.h"

#else

  #include <string.h>
  #include "l1_types.h"
  #include "sys_types.h"
  #include "l1_const.h"
  #if TESTMODE
    #include "l1tm_defty.h"
  #endif
  #if (AUDIO_TASK == 1)
    #include "l1audio_const.h"
    #include "l1audio_cust.h"
    #include "l1audio_defty.h"
  #endif  
  #if (L1_GTT == 1)
    #include "l1gtt_const.h"
    #include "l1gtt_defty.h"
  #endif
  #if (L1_MP3 == 1)
    #include "l1mp3_defty.h"
  #endif
  #if (L1_MIDI == 1)
    #include "l1midi_defty.h"
  #endif
  #include "l1_defty.h"
  #include "cust_os.h"
  #include "l1_varex.h"
  #include "l1p_cons.h"
  #include "l1p_msgt.h"
  #include "l1p_deft.h"
  #include "l1p_vare.h"

  #include "l1_msgty.h"
  #include "l1_proto.h"

#endif

// Internal prototypes
T_TRANSFER_SET    *l1pa_get_free_transfer_set (UWORD8  new_tbf);
int                l1pa_sort                  (const void *a, const void *b);
void               l1pa_reset_cr_freq_list    ();
T_CRES_LIST_PARAM *l1pa_get_free_cres_list_set();
void               l1pa_send_int_meas_report  (UWORD32               SignalCode, 
                                               T_L1P_ITMEAS_IND     *last_l1s_msg, 
                                               T_L1A_INT_MEAS_PARAM *first_meas_ptr);
void               l1pa_send_confirmation     (UWORD32 SignalCode, UWORD8 id);

/*-------------------------------------------------------*/
/* l1pa_get_free_transfer_set()                          */
/*-------------------------------------------------------*/
/*                                                       */
/* Description:                                          */
/* ------------                                          */
/*                                                       */
/* Modified parameters from globals:                     */
/* ---------------------------------                     */
/*                                                       */
/*-------------------------------------------------------*/
T_TRANSFER_SET  *l1pa_get_free_transfer_set(UWORD8  new_tbf)
{
  T_TRANSFER_SET  *transfer_set;

  #define clear_and_new(i, tbf) \
    switch(tbf) \
    { \
      case UL_TBF: \
        l1pa_l1ps_com.transfer.fset[i]->allocated_tbf = DL_TBF; \
      break; \
      \
      case DL_TBF: \
        l1pa_l1ps_com.transfer.fset[i]->allocated_tbf = UL_TBF; \
      break; \
    }
  
  // If new_tbf is to replace an existing one, we must return
  // the considered free set.
  if(new_tbf == BOTH_TBF)
  {
    if(l1pa_l1ps_com.transfer.fset[0]->allocated_tbf == NO_TBF)
      transfer_set = l1pa_l1ps_com.transfer.fset[1];
    else
      transfer_set = l1pa_l1ps_com.transfer.fset[0];
  }
  else
  if(l1pa_l1ps_com.transfer.fset[0]->allocated_tbf == new_tbf)
    transfer_set = l1pa_l1ps_com.transfer.fset[0];
  else
  if(l1pa_l1ps_com.transfer.fset[1]->allocated_tbf == new_tbf)
    transfer_set = l1pa_l1ps_com.transfer.fset[1];
  else
  if(l1pa_l1ps_com.transfer.fset[0]->allocated_tbf == BOTH_TBF)
  {
    clear_and_new(0, new_tbf);
    transfer_set = l1pa_l1ps_com.transfer.fset[1];
  }
  else
  if(l1pa_l1ps_com.transfer.fset[1]->allocated_tbf == BOTH_TBF)
  {
    clear_and_new(1, new_tbf);
    transfer_set = l1pa_l1ps_com.transfer.fset[0];
  }
  else
    if(l1pa_l1ps_com.transfer.fset[0]->allocated_tbf == NO_TBF)
      transfer_set = l1pa_l1ps_com.transfer.fset[0];
    else
      transfer_set = l1pa_l1ps_com.transfer.fset[1];

  transfer_set->SignalCode                = NULL;
  transfer_set->dl_tbf_synchro_timeslot   = 0;
  transfer_set->ul_tbf_synchro_timeslot   = 0;
  transfer_set->transfer_synchro_timeslot = 0;

  // No init of "allocated_tbf"

  transfer_set->assignment_command = NO_TBF;
  transfer_set->multislot_class    = 0;
  transfer_set->packet_ta.ta       = 255;     // Not present
  transfer_set->packet_ta.ta_index = 255;     // Not present
  transfer_set->packet_ta.ta_tn    = 255;     // Not present
  transfer_set->tsc                = 0;

  transfer_set->freq_param.chan_sel.h                          = 0;
  transfer_set->freq_param.chan_sel.rf_channel.single_rf.radio_freq = 0;
  transfer_set->freq_param.chan_sel.rf_channel.hopping_rf.maio = 0;
  transfer_set->freq_param.chan_sel.rf_channel.hopping_rf.hsn  = 0;
  transfer_set->freq_param.freq_list.rf_chan_cnt               = 0;

  transfer_set->tbf_sti.present = FALSE;

  transfer_set->dl_pwr_ctl.p0                 = 255;
  transfer_set->dl_pwr_ctl.bts_pwr_ctl_mode   = 0;
  transfer_set->dl_pwr_ctl.pr_mode            = 0;

  transfer_set->ts_override                   = 0;
  transfer_set->pc_meas_chan                  = 0;
       
  // No init of "ul_tbf_alloc" and "ul_tbf_alloc", mac_mode is enought
  
  return(transfer_set);
}

/*-------------------------------------------------------*/
/* l1pa_sort()                                           */
/*-------------------------------------------------------*/
/*                                                       */
/* Description:                                          */
/* ------------                                          */
/*                                                       */
/* Modified parameters from globals:                     */
/* ---------------------------------                     */
/*                                                       */
/*-------------------------------------------------------*/
int l1pa_sort(const void *a, const void *b)
{
  UWORD8 entry1, entry2;

  entry1 = *((UWORD8*) a);
  entry2 = *((UWORD8*) b);

  if (entry1 < entry2 )
    return(-1);
  else if (entry1 == entry2)
         return(0);
       else 
         return(1);
}

/*-------------------------------------------------------*/
/* l1pa_reset_cr_freq_list()                             */
/*-------------------------------------------------------*/
/*                                                       */
/* Description:                                          */
/* ------------                                          */
/* This function resets parameters used in Frequency     */
/* list task                                             */
/*                                                       */
/*-------------------------------------------------------*/
void l1pa_reset_cr_freq_list()
{
  UWORD8 i;
 
  for(i=0; i<NB_MEAS_MAX_GPRS; i++)       
  {
    l1pa_l1ps_com.cr_freq_list.used_il_lna   [i].il = l1_config.params.il_min; // IL used in CTRL phase for AGC setting.  
    l1pa_l1ps_com.cr_freq_list.used_il_lna_d [i].il = l1_config.params.il_min; // ... 1 frame delay.
    l1pa_l1ps_com.cr_freq_list.used_il_lna_dd[i].il = l1_config.params.il_min; // ... 2 frames delay, used in READ phase.

    l1pa_l1ps_com.cr_freq_list.used_il_lna   [i].lna = FALSE; // LNA used in CTRL phase for AGC setting.  
    l1pa_l1ps_com.cr_freq_list.used_il_lna_d [i].lna = FALSE; // ... 1 frame delay.
    l1pa_l1ps_com.cr_freq_list.used_il_lna_dd[i].lna = FALSE; // ... 2 frames delay, used in READ phase.
  }
  
  // Initialize next power measurement control.
  l1pa_l1ps_com.cr_freq_list.next_to_ctrl = 0;
  
  // Initialize next power measurement result.
  l1pa_l1ps_com.cr_freq_list.next_to_read = 0; 

  // Reset PPCH burst ctrl indication
  l1pa_l1ps_com.cr_freq_list.pnp_ctrl = 0;
          
} 

/*-------------------------------------------------------*/
/* l1pa_get_free_cres_list_set()                         */
/*-------------------------------------------------------*/
/* Parameters :                                          */
/* Return     :                                          */
/* Functionality :                                       */
/*-------------------------------------------------------*/
T_CRES_LIST_PARAM *l1pa_get_free_cres_list_set()
{
  T_CRES_LIST_PARAM *flist;
  
  // Get free set pointer.
  if(l1pa_l1ps_com.cres_freq_list.alist == &(l1pa_l1ps_com.cres_freq_list.list[0]))
    flist = &(l1pa_l1ps_com.cres_freq_list.list[1]);
  else
    flist = &(l1pa_l1ps_com.cres_freq_list.list[0]);
     
  // Clear free set.
  flist->nb_carrier = 0;
  flist->list_id    = 0;

  // Reset fifo used in AGC algo => NEED MORE INVESTIGATION.


  return(flist);
}

/*-------------------------------------------------------*/
/* l1pa_send_int_meas_report()                           */
/*-------------------------------------------------------*/
/*                                                       */
/* Description:                                          */
/* ------------                                          */
/* This function builds and sends the Interf. Meas.      */
/* report to L3                                          */
/*                                                       */
/*-------------------------------------------------------*/
void l1pa_send_int_meas_report(UWORD32               SignalCode, 
                               T_L1P_ITMEAS_IND     *last_l1s_msg, 
                               T_L1A_INT_MEAS_PARAM *first_meas_ptr)
{
  xSignalHeaderRec *msg;
  UWORD8            i,j,k;
  UWORD8            bit_mask = 0x80;

  // Allocate report msg and fill signal code.
  msg = os_alloc_sig(sizeof(T_MPHP_INT_MEAS_IND));
  DEBUGMSG(status,NU_ALLOC_ERR)         
  msg->SignalCode = SignalCode;

  // Save measurement results
  //-------------------------
  for(i = 0, j = 0, k = 0; i < 8; i++, bit_mask >>= 1)
  {
    // Fill 1st measurement report
    //----------------------------
    // If a measurement was done on timeslot i
    if(first_meas_ptr->meas_bitmap & bit_mask)
    {
      // The result is stored in the msg. 
      ((T_MPHP_INT_MEAS_IND *) (msg->SigP))->int_meas[i].rxlev[0] = first_meas_ptr->rxlev[j];

      // Next measurement value
      j++;
    }
    else
    {
      // No measurement processed on timeslot i (0x80 value)
      ((T_MPHP_INT_MEAS_IND *) (msg->SigP))->int_meas[i].rxlev[0] = (WORD8)NO_MEAS; //omaps00090550
    }
    
    // Fill 2nd measurement report
    //----------------------------
    // If a measurement was done on timeslot i
    if(last_l1s_msg->meas_bitmap & bit_mask)
    {
      // The result is stored in the msg. 
      ((T_MPHP_INT_MEAS_IND *) (msg->SigP))->int_meas[i].rxlev[1] = last_l1s_msg->rxlev[k];

      // Next measurement value
      k++;
    }
    else
    {
      // No measurement processed on timeslot i (0x80 value)
      ((T_MPHP_INT_MEAS_IND *) (msg->SigP))->int_meas[i].rxlev[1] = (WORD8)NO_MEAS;
    }
  }

  // Set ID in the report message
  ((T_MPHP_INT_MEAS_IND *) (msg->SigP))->id = first_meas_ptr->id;
                                      
  #if (TRACE_TYPE==1) || (TRACE_TYPE==4)
    l1_trace_message(msg);
  #endif
   
  os_send_sig(msg, GRRM1_QUEUE);  
  DEBUGMSG(status,NU_SEND_QUEUE_ERR)
}

/*-------------------------------------------------------*/
/* l1pa_send_confirmation()                              */
/*-------------------------------------------------------*/
/* Parameters :                                          */
/* Return     :                                          */
/* Functionality :                                       */
/*-------------------------------------------------------*/
void l1pa_send_confirmation(UWORD32 SignalCode, UWORD8 id)
{
  xSignalHeaderRec *msg_con;

  msg_con = os_alloc_sig(sizeof(T_MPHP_ASSIGNMENT_CON));
  DEBUGMSG(status,NU_ALLOC_ERR)
  msg_con->SignalCode = SignalCode;

  ((T_MPHP_ASSIGNMENT_CON *) msg_con->SigP)->assignment_id = id;
  
  #if (TRACE_TYPE==1) || (TRACE_TYPE==4)
    l1_trace_message(msg_con);
  #endif
   
  os_send_sig(msg_con, GRRM1_QUEUE);  
  DEBUGMSG(status,NU_SEND_QUEUE_ERR)
}


/*-------------------------------------------------------*/
/* l1pa_send_tbf_release_con()                           */
/*-------------------------------------------------------*/
/* Parameters :                                          */
/* Return     :                                          */
/* Functionality :                                       */
/*-------------------------------------------------------*/
void l1pa_send_tbf_release_con(UWORD32 SignalCode, UWORD8 tbf_type)
{
    xSignalHeaderRec *conf_msg;

    // Send the confirmation message with the TBF type to L3
    // Allocate confirmation message...
    conf_msg = os_alloc_sig( sizeof(T_MPHP_TBF_RELEASE_CON));
    DEBUGMSG(status,NU_ALLOC_ERR);

    //Fill the message
    conf_msg->SignalCode = SignalCode;
    ((T_MPHP_TBF_RELEASE_CON *)(conf_msg->SigP))->tbf_type = tbf_type;

    // Send the confirmation message...
    os_send_sig(conf_msg, GRRM1_QUEUE);
    DEBUGMSG(status,NU_SEND_QUEUE_ERR)
}
#endif //L1_GPRS