view src/g23m-aci/aci/cmh_sss.c @ 639:026c98f757a6

tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only As it turns out, there exist two different Huawei-made hw platforms both bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT. The two are NOT fw-compatible: aside from flash chip differences which should be handled by autodetection, the two hw platforms are already known to have different RFFEs with different control signals, and there may be other differences not yet known. Our current gtm900 build target is for MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence no support for that version will be possible until and unless someone provides one.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 18:19:01 +0000
parents f65a4399093d
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_SSS
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module provides the set functions related to the
|             protocol stack adapter for SS.
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_SSS_C
#define CMH_SSS_C
#endif

#include "aci_all.h"
/*==== INCLUDES ===================================================*/
#include "aci.h"
#include "aci_cmh.h"

#ifdef FAX_AND_DATA
#include "aci_fd.h"
#endif    /* of #ifdef FAX_AND_DATA */

#ifdef UART
#include "dti.h"
#include "dti_conn_mng.h"
#endif

#include "ksd.h"
#include "psa.h"
#include "psa_ss.h"
#include "psa_sim.h"
#include "psa_sms.h"
#include "psa_cc.h"
#include "cmh.h"
#include "cmh_ss.h"
#include "cmh_sim.h"
#include "cmh_sms.h"
#include "cmh_cc.h"

#ifdef SIM_TOOLKIT
#include "psa_cc.h"
#include "psa_sat.h"
#include "cmh_sat.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "cmh_cc.h"
#endif /* of SIM_TOOLKIT */

#include "psa_util.h"
#ifdef GPRS
#include "gaci_cmh.h"
#endif /* GPRS */
#include "phb.h"


#include "aci_ext_pers.h"
#include "aci_slock.h"

#ifdef SIM_PERS
#include "general.h"  // inluded for UINT8 compilation error in sec_drv.h
#include "sec_drv.h"

EXTERN T_SEC_DRV_CONFIGURATION *cfg_data;
EXTERN T_SIM_MMI_INSERT_IND *last_sim_mmi_insert_ind;
#endif

#ifdef FF_PHONE_LOCK
 EXTERN  T_OPER_RET_STATUS aci_ext_set_phone_lock_satus(T_SEC_DRV_EXT_PHONE_LOCK_TYPE type,T_SEC_DRV_EXT_PHONE_LOCK_STATUS status,const char *passwd);
 EXTERN T_OPER_RET_STATUS aci_ext_set_phone_lock_key(const char *pOldKey,const char *pNewKey);
#endif

#if defined (SIM_PERS) || defined (FF_PHONE_LOCK)
 EXTERN T_ACI_RETURN cmhSS_check_oper_result(T_OPER_RET_STATUS result); 
#endif

/*==== CONSTANTS ==================================================*/
#define AT_TOA_DEF_INT    (129)  /* toa default for international no.*/
#define AT_TOA_DEF_NAT    (145)  /* toa default for national no.*/
#define AT_TOS_DEF        (128)  /* tos default */
#define AT_CFNRY_DEF_TIME (20)   /* default no reply time */




/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/
#ifdef TI_PS_FF_AT_P_CMD_CUSDR
EXTERN T_ACI_CUSCFG_PARAMS cuscfgParams;
#endif
GLOBAL SHORT Ext_USSD_Res_Pending_sId;
GLOBAL T_CUSDR_EXT_USSD_RES Ext_USSD_Res_Pending = CUSDR_EXT_USSD_RES_Not_Pending;

/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSS                  |
| STATE   : code                  ROUTINE : sAT_PlusCCFC             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CCFC AT command
            which is responsible to set the parameters for call
            forwarding supplementary services.

            <reason> : reason for CF.
            <mode>   : CF mode.
            <number> : number to be forwarded to.
            <type>   : type of number.
            <class>  : class of calls.
            <subaddr>: subaddress of number.
            <satype> : type of subaddress.
            <time>   : no reply time.
*/

GLOBAL T_ACI_RETURN sAT_PlusCCFC  ( T_ACI_CMD_SRC srcId,
                                    T_ACI_CCFC_RSN reason,
                                    T_ACI_CCFC_MOD mode,
                                    CHAR*          number,
                                    T_ACI_TOA*     type,
                                    T_ACI_CLASS    class_type,
                                    CHAR*          subaddr,
                                    T_ACI_TOS*     satype,
                                    SHORT          time)
{
  SHORT sId1, sId2;         /* holds service id */
  UBYTE ssCd;               /* holds ss code */
  UBYTE bst1, bst2;         /* holds basic service type */
  UBYTE bs1, bs2;           /* holds basic service */
  UBYTE ton, tos;           /* holds type of number/subaddress */
  UBYTE npi, oe;            /* holds numbering plan/odd.even indicator */
  BOOL  mltyTrnFlg = FALSE; /* flags for multi transaction */
  T_CLPTY_PRM *ccfc_cldPty;

 #ifdef SIM_TOOLKIT
  T_ACI_RETURN   retVal;
 #endif /* of SIM_TOOLKIT */
 
  TRACE_FUNCTION ("sAT_PlusCCFC");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    return( AT_FAIL );
  }

  if( cmhPrm[srcId].ssCmdPrm.mltyTrnFlg NEQ 0 )
  {
    TRACE_EVENT("ssCmdPrm.mltyTrnFlg NEQ 0 !!! CCFC busy");
    return( AT_BUSY );
  }

/*
 *-------------------------------------------------------------------
 * check parameter <time>
 *-------------------------------------------------------------------
 */
  if( time EQ ACI_NumParmNotPresent )
  {
    time = AT_CFNRY_DEF_TIME;
  }
  else if (time < CCFC_TIME_MIN AND time >= 1)
  {
    /* 07.07 allows [1...30] for time while
       09.02 allows [5...30]. So map [1..4] to 5 */
    time = CCFC_TIME_MIN;
  }
  else if( time > CCFC_TIME_MAX OR time < CCFC_TIME_MIN )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  /* Implements Measure # 85 */
  if(!cmhSS_checkCCFC_RSN(reason, &ssCd))
  {
    return( AT_FAIL );
  }     
/*
 *-------------------------------------------------------------------
 * check parameter <class>
 *-------------------------------------------------------------------
 */
  if( !cmhSS_CheckClass( class_type, &bs1, &bst1, &bs2, &bst2, &mltyTrnFlg ))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

/* SIM TOOLKIT & FDN HANDLING */

    retVal = cmhSS_CF_SAT_Handle( srcId, reason, mode, number, type, class_type, subaddr, satype, time);

    if( retVal NEQ AT_CMPL )
        return( retVal );
  




/*
 *-------------------------------------------------------------------
 * check parameter <class> against possible ALS-Lock
 *-------------------------------------------------------------------
 */
  if ((ALSlock EQ ALS_MOD_SPEECH     AND class_type EQ  CLASS_AuxVce) OR
      (ALSlock EQ ALS_MOD_AUX_SPEECH AND class_type NEQ CLASS_AuxVce))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_AlsLock );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * get a new service table entry
 *-------------------------------------------------------------------
 */
  sId1 = psaSS_stbNewEntry();

  if( sId1 EQ NO_ENTRY )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
    return( AT_FAIL );
  }

  sId2 = NO_ENTRY;

  if( mltyTrnFlg )
  {
    ssShrdPrm.stb[sId1].ntryUsdFlg = TRUE;

    sId2 = psaSS_stbNewEntry();

    if( sId2 EQ NO_ENTRY )
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
      return( AT_FAIL );
    }
  }

/*
 *-------------------------------------------------------------------
 * check parameter <mode>
 *-------------------------------------------------------------------
 */
  switch( mode )
  {
    /*
     *---------------------------------------------------------------
     * enable, disable and erase call forwarding service
     *---------------------------------------------------------------
     */
    case( CCFC_MOD_Disable    ):
    case( CCFC_MOD_Enable     ):
    case( CCFC_MOD_Erasure    ):

      CCD_START;

      if( mode EQ CCFC_MOD_Disable )
        psaSS_asmDeactivateSS( ssCd, bst1, bs1 );

      else if( mode EQ CCFC_MOD_Enable )
        psaSS_asmActivateSS( ssCd, bst1, bs1 );

      else if( mode EQ CCFC_MOD_Erasure )
        psaSS_asmEraseSS( ssCd, bst1, bs1 );

      ssShrdPrm.stb[sId1].ntryUsdFlg = TRUE;
      ssShrdPrm.stb[sId1].ssCode     = ssCd;
      ssShrdPrm.stb[sId1].srvOwn     = (T_OWN)srcId;
      ssShrdPrm.stb[sId1].ClassType  = class_type;  /* the complete classes defined by the user */

      /* start first transaction */
      ssShrdPrm.stb[sId1].curCmd        = AT_CMD_CCFC;

      cmhSS_flagTrn( sId1, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg));
      psaSS_NewTrns(sId1);

      if( mltyTrnFlg )
      {
        if( mode EQ CCFC_MOD_Disable )
          psaSS_asmDeactivateSS( ssCd, bst2, bs2 );

        else if( mode EQ CCFC_MOD_Enable )
          psaSS_asmActivateSS( ssCd, bst2, bs2 );

        else if( mode EQ CCFC_MOD_Erasure )
          psaSS_asmEraseSS( ssCd, bst2, bs2 );

        ssShrdPrm.stb[sId2].ntryUsdFlg = TRUE;
        ssShrdPrm.stb[sId2].ssCode     = ssCd;
        ssShrdPrm.stb[sId2].srvOwn     = (T_OWN)srcId;
        ssShrdPrm.stb[sId2].ClassType  =class_type;  /* the complete classes defined by the user */

        /* start second transaction */
        ssShrdPrm.stb[sId2].curCmd = AT_CMD_CCFC;

        cmhSS_flagTrn( sId2, &(ssShrdPrm.mltyTrnFlg)); /* only for the second one */
        cmhSS_flagTrn( sId2, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg));

        psaSS_NewTrns(sId2);
      }

      CCD_END;
      break;

    /*
     *---------------------------------------------------------------
     * register call forwarding service
     *---------------------------------------------------------------
     */
    case( CCFC_MOD_Register   ):

      if(number EQ NULL)
      {
        TRACE_EVENT("ERROR: cannot register CCFC without a number");
        ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
        return( AT_FAIL );
      }
      MALLOC(ccfc_cldPty, sizeof(T_CLPTY_PRM));
      cmhCC_init_cldPty( ccfc_cldPty );

      cmh_bldCalPrms( number, ccfc_cldPty );

      /* check for TOA default */
      if(type EQ NULL)
      {
        ton = ccfc_cldPty->ton;
        npi = ccfc_cldPty->npi;
      }
      else if(type->ton EQ TON_NotPresent OR
              type->npi EQ NPI_NotPresent)
      {
        ton = ccfc_cldPty->ton;
        npi = ccfc_cldPty->npi;
      }
      else
      {
        ton = type->ton;
        npi = type->npi;
      }

      /* check for TOS default */
      if(satype EQ NULL)
      {
        tos = TOS_X213;
        oe  = OEI_EVEN;
      }
      else if(satype->tos EQ TOS_NotPresent OR
              satype->oe  EQ OE_NotPresent)
      {
        tos = TOS_X213;
        oe  = OEI_EVEN;
      }
      else
      {
        tos = satype -> tos;
        oe  = satype -> oe;
      }

      if(subaddr EQ NULL           AND
         ccfc_cldPty->sub[0] NEQ 0) /* if not set by user AND number contained a subaddress */
      {
        subaddr = (CHAR *)ccfc_cldPty->sub;
      }

      CCD_START;

      psaSS_asmRegisterSS( ssCd, bst1, bs1,
                           ton, npi, (UBYTE*)ccfc_cldPty->num, tos, oe, (UBYTE *)subaddr, (UBYTE)time );

      ssShrdPrm.stb[sId1].ntryUsdFlg = TRUE;
      ssShrdPrm.stb[sId1].ssCode     = ssCd;
      ssShrdPrm.stb[sId1].srvOwn     = (T_OWN)srcId;

      /* start first transaction */
      ssShrdPrm.stb[sId1].curCmd        = AT_CMD_CCFC;
      cmhSS_flagTrn( sId1, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg));
      psaSS_NewTrns(sId1);

      if( mltyTrnFlg )
      {
        psaSS_asmRegisterSS( ssCd, bst2, bs2,
                             ton, npi, (UBYTE*)ccfc_cldPty->num, tos, oe, (UBYTE *)subaddr, (UBYTE)time );

        ssShrdPrm.stb[sId2].ntryUsdFlg = TRUE;
        ssShrdPrm.stb[sId2].ssCode     = ssCd;
        ssShrdPrm.stb[sId2].srvOwn     = (T_OWN)srcId;

        /* start second transaction */
        ssShrdPrm.stb[sId2].curCmd = AT_CMD_CCFC;
        cmhSS_flagTrn( sId2, &(ssShrdPrm.mltyTrnFlg)); /* only for the second one */
        cmhSS_flagTrn( sId2, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg));
        psaSS_NewTrns(sId2);
      }
      MFREE(ccfc_cldPty);
      CCD_END;
      break;

    /*
     *---------------------------------------------------------------
     * unexpected mode
     *---------------------------------------------------------------
     */
    case( CCFC_MOD_NotPresent ):
    default:

      ssShrdPrm.stb[sId1].ntryUsdFlg = FALSE;
      if( sId2 NEQ NO_ENTRY ) ssShrdPrm.stb[sId2].ntryUsdFlg = FALSE;

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * log command execution
 *-------------------------------------------------------------------
 */
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  {
  T_ACI_CLOG cmdLog;        /* holds logging info */

  cmdLog.atCmd                = AT_CMD_CCFC;
  cmdLog.cmdType              = CLOG_TYPE_Set;
  cmdLog.retCode              = AT_EXCT;
  cmdLog.cId                  = ACI_NumParmNotPresent;
  cmdLog.sId                  = sId1+1;
  cmdLog.cmdPrm.sCCFC.srcId   = srcId;
  cmdLog.cmdPrm.sCCFC.reason  = reason;
  cmdLog.cmdPrm.sCCFC.mode    = mode;
  cmdLog.cmdPrm.sCCFC.number  = number;
  cmdLog.cmdPrm.sCCFC.type    = type;
  cmdLog.cmdPrm.sCCFC.class_type = class_type;
  cmdLog.cmdPrm.sCCFC.subaddr = subaddr;
  cmdLog.cmdPrm.sCCFC.satype  = satype;
  cmdLog.cmdPrm.sCCFC.time    = time;

  rAT_PercentCLOG( &cmdLog );
  }
#endif

  return( AT_EXCT );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSS                  |
| STATE   : code                  ROUTINE : sAT_PlusCLCK             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CLCK AT command
            which is responsible to set the parameters for call
            barring supplementary services.

            <fac>    : CB facility.
            <mode>   : CB mode.
            <passwd> : password for CB facility.
            <class_type>: class of calls.
*/
LOCAL BOOL check_sat_cb_pwd_required(UBYTE ssCd, CHAR  *passwd)
{
#ifdef SIM_TOOLKIT
  SHORT ss_id = NO_ENTRY;
  T_OWN owner;

  /* Special case: there was an SS (by STK) transaction running. 
     It returned get password, handle the password for this transaction */

  TRACE_FUNCTION ("check_sat_ss_pwd_required ()");

  /* satShrdPrm.sId_pwd_requested will be reset by any mnss_end_ind
  to be sure it has been reset.
  This means: user has to give password right after error has been
  shown. */
  ss_id = satShrdPrm.sId_pwd_requested;
  if( ss_id EQ NO_ENTRY)
  {
    return(FALSE);
  }

  if( ssShrdPrm.stb[ss_id].srvOwn NEQ OWN_SRC_SAT )
  {
    satShrdPrm.sId_pwd_requested = NO_ENTRY;
    return(FALSE);
  }
  TRACE_EVENT("Password required during a SAT session");
  
  if( ssShrdPrm.stb[ss_id].curCmd NEQ ((T_ACI_AT_CMD)KSD_CMD_CB) )
  {
    TRACE_EVENT_P1("Wrong command context: %d", ssShrdPrm.stb[ss_id].curCmd);
    satShrdPrm.sId_pwd_requested = NO_ENTRY;
    return(FALSE);
  }
  owner = ssShrdPrm.stb[ss_id].srvOwn;

  if(ssShrdPrm.stb[ss_id].ssCode EQ ssCd)
  { 
    /* store for later use (as usual)*/
    strncpy
    (
      (char *) cmhPrm[owner].ssCmdPrm.CXXXpwd,
      (char *) passwd,
      MAX_PWD_NUM
    );
    cmhPrm[owner].ssCmdPrm.CXXXpwd[MAX_PWD_NUM] = '\0';
    psaSS_asmVerifyPWD( cmhPrm[owner].ssCmdPrm.CXXXpwd);
    psaSS_CntTrns(ss_id);
    satShrdPrm.sId_pwd_requested = NO_ENTRY;
    return(TRUE); /* as pwd only needed for SAT session*/
  }
  else
  {
    TRACE_EVENT_P1("Wrong Service type: %d", ssCd);
  }
  satShrdPrm.sId_pwd_requested = NO_ENTRY;
#endif /* SIM_TOOLKIT */
  return(FALSE);
}

/*
+------------------------------------------------------------------------------
|  Function    : sAT_PlusCLCK
+------------------------------------------------------------------------------
|  Description : This is the functional counterpart to the +CLCK AT command
|            which is responsible to set the parameters for call
|            barring supplementary services. also fo locking and unlocking ME for categories 
|            Networl lock, Network Subset lock, Service Provider Lock, Corporate Lock, SIM Lock
|
|  Parameters  : <fac>    : CB facility.
|                      <mode>   : CB mode.
|                      <passwd> : password for CB facility.
|                      <class_type>: class of calls.
|
|  Return      :  AT_FAIL    -      execution of command failed 
|         AT_CMPL   -      execution of command completed 
|         AT_EXCT   -      execution of command is in progress 
|         AT_BUSY   -      execution of command is rejected due
|
+------------------------------------------------------------------------------
*/

GLOBAL T_ACI_RETURN sAT_PlusCLCK  ( T_ACI_CMD_SRC srcId,
                                    T_ACI_FAC fac,
                                    T_ACI_CLCK_MOD mode,
                                    CHAR  *        passwd,
                                    T_ACI_CLASS    class_type)
{
  SHORT sId1, sId2;        /* holds service id  */
  UBYTE ssCd;                  /* holds ss code     */
  UBYTE bst1, bst2;         /* holds basic service type */
  UBYTE bs1,  bs2;           /* holds basic service */
  BOOL  mltyTrnFlg = FALSE; /* flags for multi transaction */
  #ifdef SIM_PERS
  T_SIMLOCK_TYPE slocktype;
  T_SIMLOCK_STATUS rlockstatus;
  #endif
  SHORT psasim_ret;
  BOOL  done = FALSE;
#ifdef SIM_PERS
  T_ACI_CME_ERR err_code = CME_ERR_NotPresent; /* code holding the correct error code calculated */
  UBYTE cmdBuf;                 /* buffers current command */
#endif
#ifdef SIM_PERS
  T_OPER_RET_STATUS fcResetStat;  /*holds Failure Counter Reset Return Status Introduced on 11/03/2005*/
  T_OPER_RET_STATUS masterunlockStat;
  T_SIMLOCK_STATUS retSlStatus; /* holds return code */
#endif
#ifdef FF_PHONE_LOCK
   T_OPER_RET_STATUS phone_lock_oper_ret_stat;
#endif
  T_ACI_RETURN   retVal;

  TRACE_FUNCTION ("sAT_PlusCLCK ()");
   
/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * check parameter <fac>
 *-------------------------------------------------------------------
 */
  /* Implements Measure # 166 */
#ifdef SIM_PERS
  if((fac EQ FAC_Fc) OR ( fac EQ FAC_Fcm) OR ( fac EQ FAC_Mu)  OR (fac EQ FAC_Mum))
  {
    ssCd = NOT_PRESENT_8BIT;
  }
  else
#endif
  if( !cmhSS_getSSCd(fac, &ssCd) )
  {
    return( AT_FAIL );
  }
/*
 *-------------------------------------------------------------------
 * if action is related to SS
 *-------------------------------------------------------------------
 */
  if( ssCd NEQ NOT_PRESENT_8BIT )
  {
  /*
   *-------------------------------------------------------------------
   * check parameter <passwd>
   *-------------------------------------------------------------------
   */
    if( passwd AND strlen( passwd ) > MAX_PWD_NUM )
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
    }

  /*
   *-------------------------------------------------------------------
   * check parameter <class>
   *-------------------------------------------------------------------
   */
    if( !cmhSS_CheckCbClass( class_type, &bs1, &bst1, &bs2, &bst2, &mltyTrnFlg ))
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow );
      return( AT_FAIL );
    }

    if( cmhPrm[srcId].ssCmdPrm.mltyTrnFlg NEQ 0 )
      return( AT_BUSY );

  /*
   *-------------------------------------------------------------------
   * check combination of <mode> and <fac>
   *-------------------------------------------------------------------
   */
    if((fac EQ FAC_Ab OR fac EQ FAC_Ag OR fac EQ FAC_Ac)
       AND mode NEQ CLCK_MOD_Unlock )
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow );
      return( AT_FAIL );
    }

    /*** Shangai's labs tessession fix: adapted to this version from 1.3.3 (TCS 2.0) ****/
      /* Special case: there was an SS (by STK) transaction running. 
         It returned get password, handle the password for this transaction */
    done = check_sat_cb_pwd_required(ssCd, passwd);
    if(done)
    {
      return(AT_CMPL); /* as pwd only needed for SAT session*/
    }
    /* End fix */


/* SIM TOOLKIT & FDN HANDLING */
    retVal = cmhSS_Call_Barr_SAT_Handle( srcId, mode, fac, passwd, class_type);

    if( retVal NEQ AT_CMPL )
        return( retVal );
  
  /*
   *-------------------------------------------------------------------
   * get a new service table entry
   *-------------------------------------------------------------------
   */
    sId1 = psaSS_stbNewEntry();

    if( sId1 EQ NO_ENTRY )
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
      return( AT_FAIL );
    }

    sId2 = NO_ENTRY;

    if( mltyTrnFlg )
    {
      ssShrdPrm.stb[sId1].ntryUsdFlg = TRUE;
      sId2 = psaSS_stbNewEntry();

      if( sId2 EQ NO_ENTRY )
      {
        ssShrdPrm.stb[sId1].ntryUsdFlg = FALSE;
        ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
        return( AT_FAIL );
      }
    }

  /*
   *-------------------------------------------------------------------
   * check parameter <mode>
   *-------------------------------------------------------------------
   */
    switch( mode  )
    {
      /*
       *---------------------------------------------------------------
       * lock and unlock call barring service
       *---------------------------------------------------------------
       */
      case( CLCK_MOD_Unlock ):
      case( CLCK_MOD_Lock   ):

        CCD_START;

        if( mode EQ CLCK_MOD_Unlock )
          psaSS_asmDeactivateSS( ssCd, bst1, bs1 );

        else if( mode EQ CLCK_MOD_Lock )
          psaSS_asmActivateSS( ssCd, bst1, bs1 );

        ssShrdPrm.stb[sId1].ntryUsdFlg = TRUE;
        ssShrdPrm.stb[sId1].ssCode     = ssCd;
        ssShrdPrm.stb[sId1].srvOwn     = (T_OWN)srcId;

        /* start first transaction */
        ssShrdPrm.stb[sId1].curCmd        = AT_CMD_CLCK;
        cmhSS_flagTrn( sId1, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg));
        psaSS_NewTrns(sId1);

        if( mltyTrnFlg )
        {
          if( mode EQ CLCK_MOD_Unlock )
            psaSS_asmDeactivateSS( ssCd, bst2, bs2 );

          else if( mode EQ CLCK_MOD_Lock )
            psaSS_asmActivateSS( ssCd, bst2, bs2 );

          ssShrdPrm.stb[sId2].ntryUsdFlg = TRUE;
          ssShrdPrm.stb[sId2].ssCode      = ssCd;
          ssShrdPrm.stb[sId2].srvOwn     = (T_OWN)srcId;

          /* start second transaction */
          ssShrdPrm.stb[sId2].curCmd = AT_CMD_CLCK;
          cmhSS_flagTrn( sId2, &(ssShrdPrm.mltyTrnFlg)); /* only for the second one */
          cmhSS_flagTrn( sId2, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg));
          psaSS_NewTrns(sId2);
        }
        CCD_END;
        break;

      /*
       *---------------------------------------------------------------
       * unexpected mode
       *---------------------------------------------------------------
       */
      case( CLCK_MOD_NotPresent ):
      default:

        ssShrdPrm.stb[sId1].ntryUsdFlg = FALSE;
        if( sId2 NEQ NO_ENTRY ) ssShrdPrm.stb[sId2].ntryUsdFlg = FALSE;

        ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
        return( AT_FAIL );
    }

  /*
   *-------------------------------------------------------------------
   * store password for later use
   *-------------------------------------------------------------------
   */
    if( passwd )
    {
      strncpy
      (
        (char *) cmhPrm[srcId].ssCmdPrm.CXXXpwd,
        (char *) passwd,
        MAX_PWD_NUM
      );
      cmhPrm[srcId].ssCmdPrm.CXXXpwd[MAX_PWD_NUM] = '\0';
    }
  }

  /*
   *-------------------------------------------------------------------
   * if action is related to SIM
   *-------------------------------------------------------------------
   */
  else
  {
      if( simEntStat.curCmd NEQ AT_CMD_NONE )
      return( AT_BUSY );

    switch (fac)
    {
      /*
       *---------------------------------------------------------------
       * access PIN 1
       *---------------------------------------------------------------
       */
      case FAC_Sc:
        switch( mode )
        {
          case( CLCK_MOD_Unlock ):
          case( CLCK_MOD_Lock   ):
            if (simShrdPrm.PINStat EQ PS_PUK1)
            {
              ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_SimPukReq);
              return( AT_FAIL );
            }
            if (!psaSIM_ChkSIMSrvSup(SRV_CHV1_Disable))
            {
              ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow);
              return( AT_FAIL );
            }
            if( !passwd OR (strlen( passwd ) > PIN_LEN) )
            {
              ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
              return( AT_FAIL );
            }
            if( strlen( passwd ) < MIN_PIN_LEN OR   
                strlen( passwd ) > PIN_LEN        )
            {
              ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
              return( AT_FAIL );
            }
            cmhSIM_FillInPIN ( passwd, simShrdPrm.setPrm[srcId].curPIN, PIN_LEN );
            simShrdPrm.setPrm[srcId].PINType = PHASE_2_PIN_1;
            simEntStat.curCmd     = AT_CMD_CLCK;
            simShrdPrm.owner = (T_OWN)srcId;
            simEntStat.entOwn =  srcId;

            if( mode EQ CLCK_MOD_Lock )
            {
              psasim_ret = psaSIM_EnablePIN( );
            }
            else /* if( mode EQ CLCK_MOD_Unlock ) */
            {
              psasim_ret = psaSIM_DisablePIN( );
            }

            if(psasim_ret < 0)
            {
              TRACE_EVENT( "FATAL RETURN psaSIM in +CLCK" );
              ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal );
              return( AT_FAIL );
            }
            break;

          default:

            ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
            return( AT_FAIL );
        }
        break;

      /*
       *---------------------------------------------------------------
       * access fixed dialling feature
       *---------------------------------------------------------------
       */
      case FAC_Fd:
    if (!psaSIM_ChkSIMSrvSup(SRV_FDN))
        {
          ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow);
          return( AT_FAIL );
        }
        /* 
          Check the SIM PIN States before sending any request to SIM 
        */
        if ( simShrdPrm.PINStat EQ PS_PUK2 )
        {
          TRACE_EVENT("sAT_PlusCLCK_ME(): SIM PIN-2 Bolcked PUK-2 Required");
          ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_SimPuk2Req );
          return( AT_FAIL );
        }
       
        /* 
          According to the standards 27.007 Sec 7.4 for facility "FDN": 
          if PIN2 authentication has not been done during the current session,
          PIN2 is required as <passwd>; Below condition will do the
          same to check to see whether <passwd> is required / not. 
        */

        if ( simShrdPrm.pn2Stat EQ PS_PIN2  OR 
             simShrdPrm.pn2Stat EQ NO_VLD_PS )
        { 
          if ( simShrdPrm.PINStat EQ PS_RDY OR
               simShrdPrm.PINStat EQ PS_PIN2 )
          {
            simShrdPrm.PINStat = PS_PIN2;          
          }
          else
          {
            TRACE_EVENT("sAT_PlusCLCK_ME(): SIM PIN State is NOT Valid");
            ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_SimFail );
            return( AT_FAIL );
          }
        
          if( !passwd OR ( strlen( passwd ) > PIN_LEN OR
               strlen( passwd ) < MIN_PIN_LEN ) )
          {
            TRACE_EVENT("sAT_PlusCLCK_ME(): SIM PIN-2 Password is Omitted");
            ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_SimPin2Req );
            return( AT_FAIL );
          }
        }

         /* 
         * test class_type whether it is supported and store it temporarily for further use 
         */      
        if( class_type EQ CLASS_NotPresent OR    /* default case */
            class_type EQ CLASS_VceDatFax     )  /* case 7       */
        {
          simShrdPrm.classFDN = CLASS_VceDatFax;
        }
        else if ( class_type EQ CLASS_VceDatFaxSms  ) /* case 15 */
        {
          simShrdPrm.classFDN = CLASS_VceDatFaxSms;  /* set global class type */
        }
        else  /* parameter not supported */
        {
          TRACE_EVENT( "class type not supported, +CLCK rejected" );
          ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotSupp );
          return( AT_FAIL );        
        }
        simShrdPrm.setPrm[srcId].actProc = (mode EQ CLCK_MOD_Lock)?
                                             SIM_FDN_ENABLE:SIM_FDN_DISABLE;

        simEntStat.curCmd = AT_CMD_CLCK;
        simShrdPrm.owner = (T_OWN)srcId;
        simEntStat.entOwn =  srcId;

        if( psaSIM_ActivateSIM() < 0 )   /* activate SIM card */
        {
          TRACE_EVENT( "FATAL RETURN psaSIM in +CLCK" );
          ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal );
          return( AT_FAIL );
        }

        /* store PIN 2 for later use */
        /* if( passwd )  ... already checked in the beginning! */
        cmhSIM_FillInPIN ( passwd, simShrdPrm.setPrm[srcId].curPIN, PIN_LEN );

        break;

      /*
       *---------------------------------------------------------------
       * lock ALS setting with PIN2
       *---------------------------------------------------------------
       */
      case FAC_Al:

        if( !passwd OR ( strlen( passwd ) > PIN_LEN     OR
                         strlen( passwd ) < MIN_PIN_LEN ) )
        {
          ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
          return( AT_FAIL );
        }

        cmhSIM_FillInPIN ( passwd, simShrdPrm.setPrm[srcId].curPIN, PIN_LEN );

        simShrdPrm.setPrm[srcId].actProc = (mode EQ CLCK_MOD_Lock)?
                                             SIM_ALS_LOCK:SIM_ALS_UNLOCK;

        simShrdPrm.setPrm[srcId].PINType = PHASE_2_PIN_2;

        simEntStat.curCmd = AT_CMD_CLCK;
        simShrdPrm.owner = (T_OWN)srcId;
        simEntStat.entOwn =  srcId;

        if( psaSIM_VerifyPIN() < 0 )   /* check PIN2 card */
        {
          TRACE_EVENT( "FATAL RETURN psaSIM in +CLCK" );
          ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal );
          return( AT_FAIL );
        }

        break;

      /*
       *---------------------------------------------------------------
       * ME Personalisation
       *---------------------------------------------------------------
       */
  #ifdef SIM_PERS
      case FAC_Pn:
      case FAC_Pu:
      case FAC_Pp:
      case FAC_Pc:
      case FAC_Ps:
      case FAC_Pf:
      case FAC_Bl:
                
        switch (fac)
        {
          case FAC_Pn: slocktype = SIMLOCK_NETWORK;          break;
          case FAC_Pu: slocktype = SIMLOCK_NETWORK_SUBSET;   break;
          case FAC_Pp: slocktype = SIMLOCK_SERVICE_PROVIDER; break;
          case FAC_Pc: slocktype = SIMLOCK_CORPORATE;        break;
          case FAC_Ps: slocktype = SIMLOCK_SIM;              break;
          case FAC_Pf: slocktype = SIMLOCK_FIRST_SIM;        break;
	  case FAC_Bl: slocktype = SIMLOCK_BLOCKED_NETWORK;        break;
          default: slocktype = SIMLOCK_NETWORK;
        }

       /* 
        * Check whether sim is inserted or not before trying to lock/Unlock 
        */
       
       if(simShrdPrm.SIMStat EQ SS_OK) 
        {
          rlockstatus = (mode EQ CLCK_MOD_Lock)?
          aci_slock_lock(slocktype, passwd):
          aci_slock_unlock(slocktype, passwd);
       }
      else 
       {
          /*
           * Sim is not present: unlocking is allowed if No_SIM_Unlock flag is OFF
          */
         if(!aci_slock_set_CFG())
         {
            ACI_ERR_DESC( ACI_ERR_CLASS_Ext,EXT_ERR_NoMEPD); 
            return( AT_FAIL );
         }

         if( (mode EQ CLCK_MOD_Unlock) AND !(cfg_data->Flags & SEC_DRV_HDR_FLAG_No_SIM_Unlock))
         {
            MFREE(cfg_data);
            rlockstatus = aci_slock_unlock(slocktype, passwd);        
         }
        else
        {
           MFREE(cfg_data);
           ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_SimNotIns);    
           return( AT_FAIL );
        }
      }
      cmdBuf = AT_CMD_CLCK ; 
      if ( ( (mode EQ CLCK_MOD_Lock) AND (rlockstatus EQ SIMLOCK_ENABLED) ) OR
              ( (mode EQ CLCK_MOD_Unlock) AND (rlockstatus EQ SIMLOCK_DISABLED) ) )
        {
            return (AT_CMPL);
        }
        else
        {
          if (rlockstatus EQ SIMLOCK_BLOCKED) /* Special error description on blocked personalisation */
           {
             if(!aci_slock_set_CFG())
                {
                  ACI_ERR_DESC( ACI_ERR_CLASS_Ext,EXT_ERR_NoMEPD);    
                  return( AT_FAIL );
                }
               aci_set_cme_error(slocktype);
               MFREE(cfg_data);
           }
          else if(rlockstatus EQ SIMLOCK_WAIT)
            {
               simEntStat.curCmd = AT_CMD_CLCK;
               simShrdPrm.owner = (T_OWN)srcId;
               simEntStat.entOwn = srcId;
              AciSLockShrd.check_lock = SIMLOCK_CHECK_LOCK;
              AciSLockShrd.lock_type = slocktype;
              AciSLockShrd.lock_passwd = passwd;
              
              return( AT_EXCT);
            }
          else if(rlockstatus EQ SIMLOCK_BUSY)
          {
            ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Busy );
          }
          else 
          {
            ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_WrongPasswd );
          }
            return( AT_FAIL );
        }

/*
       *---------------------------------------------------------------
       * FC RESET Handling
       Added on 11/03/2005
       *---------------------------------------------------------------
*/
     case FAC_Fc:
      {
      fcResetStat=aci_slock_reset_fc(passwd);
      simEntStat.curCmd     = AT_CMD_CLCK;     
      if (fcResetStat EQ OPER_SUCCESS)
      {
          if( !aci_slock_set_CFG())
              {
                ACI_ERR_DESC( ACI_ERR_CLASS_Ext,EXT_ERR_NoMEPD);    
                return( AT_FAIL );
              }
             aci_slock_init();
             AciSLockShrd.check_lock = SIMLOCK_CHECK_RESET_FC;           
             retSlStatus = aci_slock_checkpersonalisation(AciSLockShrd.current_lock);
             switch(retSlStatus)
             {
               case  SIMLOCK_ENABLED  :
			     return( AT_CMPL);
             case  SIMLOCK_WAIT :
               return (AT_EXCT);
             default : 
               return( AT_FAIL);
           }
         }
         else 
         {
           cmdBuf = simEntStat.curCmd;
           simEntStat.curCmd = AT_CMD_NONE;

           if (fcResetStat EQ OPER_WRONG_PASSWORD)
           {
              ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_WrongPasswd );
              aci_slock_send_RAT(cmdBuf,CME_ERR_WrongPasswd);		
           }
           else if (fcResetStat EQ OPER_BUSY)
           {
              ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Busy );
              aci_slock_send_RAT(cmdBuf,err_code);
           }
           else 
           {
              ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_Unknown );
              aci_slock_send_RAT(cmdBuf,CME_ERR_Unknown);
           }
          return( AT_FAIL );
       }
     } 
    case FAC_Fcm:
     {
           fcResetStat=aci_slock_reset_fc(passwd);
           return(cmhSS_check_oper_result(fcResetStat));
     } 
     case( FAC_Mu ): 
     {
       masterunlockStat = aci_slock_master_unlock(passwd); 
       simEntStat.curCmd     = AT_CMD_CLCK; 
       if( masterunlockStat EQ OPER_SUCCESS )  
       {
          if(!aci_slock_set_CFG())
          {
                 ACI_ERR_DESC( ACI_ERR_CLASS_Ext,EXT_ERR_NoMEPD);     
                 return( AT_FAIL );
          }
              aci_slock_init();
              AciSLockShrd.check_lock = SIMLOCK_CHECK_MASTER_UNLOCK;           
              retSlStatus = aci_slock_checkpersonalisation(AciSLockShrd.current_lock);
              switch(retSlStatus)
              {
                case  SIMLOCK_ENABLED  :
                  return( AT_CMPL);
                case  SIMLOCK_WAIT :
                 return (AT_EXCT);
                default : 
                  return( AT_FAIL);
              } 
       }
      else
      {
          cmdBuf = simEntStat.curCmd;
          simEntStat.curCmd = AT_CMD_NONE;
          if( masterunlockStat EQ OPER_WRONG_PASSWORD )
          {
              ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_WrongPasswd );
              aci_slock_send_RAT(cmdBuf,CME_ERR_WrongPasswd);	  
          }
         else 
          {
              ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_Unknown );
              aci_slock_send_RAT(cmdBuf,CME_ERR_Unknown);
          }
        return( AT_FAIL );
      }
     }
    case( FAC_Mum ): 
    {
       masterunlockStat = aci_slock_master_unlock(passwd); 
       return(cmhSS_check_oper_result(masterunlockStat));
    }
#endif  /* SIM_PERS */
#ifdef FF_PHONE_LOCK
    case ( FAC_Pl ):
      {
          phone_lock_oper_ret_stat = aci_ext_set_phone_lock_satus(PHONE_LOCK,(T_SEC_DRV_EXT_PHONE_LOCK_STATUS)mode,passwd); 	 
         return(cmhSS_check_oper_result(phone_lock_oper_ret_stat));
     }

   case ( FAC_Apl ):
      { 
          phone_lock_oper_ret_stat = aci_ext_set_phone_lock_satus(AUTO_LOCK,(T_SEC_DRV_EXT_PHONE_LOCK_STATUS)mode,passwd); 
         return(cmhSS_check_oper_result(phone_lock_oper_ret_stat));
	  	
       }
 #endif
      /*
       *---------------------------------------------------------------
       * Error handling
       *---------------------------------------------------------------
       */
      default:
        ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_Unknown );
        return( AT_FAIL );
    }
  }

/*
 *-------------------------------------------------------------------
 * log command execution
 *-------------------------------------------------------------------
 */
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  {
  T_ACI_CLOG cmdLog;        /* holds logging info */

  cmdLog.atCmd                = AT_CMD_CLCK;
  cmdLog.cmdType              = CLOG_TYPE_Set;
  cmdLog.retCode              = AT_EXCT;
  cmdLog.cId                  = ACI_NumParmNotPresent;
  cmdLog.sId                  = (ssCd EQ NOT_PRESENT_8BIT)?
                                   ACI_NumParmNotPresent:/*lint -e(644)*/sId1+1;
  cmdLog.cmdPrm.sCLCK.srcId   = srcId;
  cmdLog.cmdPrm.sCLCK.fac     = fac;
  cmdLog.cmdPrm.sCLCK.mode    = mode;
  cmdLog.cmdPrm.sCLCK.passwd  = passwd;
  cmdLog.cmdPrm.sCLCK.class_type = class_type;
    rAT_PercentCLOG( &cmdLog );
  }
#endif
  return( AT_EXCT );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSS                  |
| STATE   : code                  ROUTINE : sAT_PlusCPWD             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CPWD AT command
            which is responsible to change the password for call
            barring supplementary services.

            <fac>    : CB facility.
            <oldpwd> : current password.
            <newpwd> : new password.
*/

GLOBAL T_ACI_RETURN sAT_PlusCPWD  ( T_ACI_CMD_SRC srcId,
                                    T_ACI_FAC fac,
                                    CHAR  *        oldpwd,
                                    CHAR  *        newpwd)
{
  T_ACI_RETURN retCd = AT_FAIL;   /* holds return code */
  UBYTE ssCd;                     /* holds ss code */
  SHORT sId;                      /* holds service id */
  T_OPER_RET_STATUS phone_lock_oper_ret_stat; 
  
  TRACE_FUNCTION ("sAT_PlusCPWD");

/*
 *-------------------------------------------------------------------
 * check password parameter
 *-------------------------------------------------------------------
 */
  if( !newpwd OR !oldpwd )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * check parameter <fac>
 *-------------------------------------------------------------------
 */
  switch( fac )
  {
    /* All Baring Services share the same password so only SS_CD_ALL_CBSS is valid,
       everything else will be rejected by the network! */
    case( FAC_Ao ):
    case( FAC_Oi ):
    case( FAC_Ox ):
    case( FAC_Ai ):
    case( FAC_Ir ):
    case( FAC_Ab ):
    case( FAC_Ag ):
    case( FAC_Ac ): ssCd = SS_CD_ALL_CBSS;   break;

    case( FAC_Sc ):
    case( FAC_P2 ):
#ifdef SIM_PERS
    case( FAC_Pn ):
    case( FAC_Pu ):
    case( FAC_Pc ):
    case( FAC_Pp ):
    case( FAC_Pf ):
    case( FAC_Ps ):
    case( FAC_Bl ):
#endif
#ifdef FF_PHONE_LOCK
    case(FAC_Pl):
    case(FAC_Apl):
#endif
		
                   ssCd = NOT_PRESENT_8BIT; break;

    case( FAC_NotPresent  ):
    default:

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * if password relates to SS
 *-------------------------------------------------------------------
 */
  if( ssCd NEQ NOT_PRESENT_8BIT )
  {
  /*
   *-------------------------------------------------------------------
   * check parameter <oldpwd>
   *-------------------------------------------------------------------
   */
    if( strlen( newpwd ) > MAX_PWD_NUM OR
        strlen( oldpwd ) > MAX_PWD_NUM    )
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
    }

  /*
   *-----------------------------------------------------------------
   * get a new service table entry to interrogate SS
   *-----------------------------------------------------------------
   */
    sId = psaSS_stbNewEntry();

    if( sId EQ NO_ENTRY )
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
      return( AT_FAIL );
    }

  /*
   *-----------------------------------------------------------------
   * set up  facility information element
   *-----------------------------------------------------------------
   */
    CCD_START;

    psaSS_asmRegisterPWD( ssCd );
  /*
   *---------------------------------------------------------------
   * declare service table entry as used and the owner of the service
   *---------------------------------------------------------------
   */
    ssShrdPrm.stb[sId].ntryUsdFlg = TRUE;
    ssShrdPrm.stb[sId].ssCode     = ssCd;
    ssShrdPrm.stb[sId].srvOwn     = (T_OWN)srcId;

  /*
   *-----------------------------------------------------------------
   * start a new transaction
   *-----------------------------------------------------------------
   */
    ssShrdPrm.stb[sId].curCmd = AT_CMD_CPWD;
    psaSS_NewTrns(sId);

    CCD_END;

  /*
   *-----------------------------------------------------------------
   * store passwords for later use
   *-----------------------------------------------------------------
   */
    strncpy
    (
      (char *) cmhPrm[srcId].ssCmdPrm.CXXXpwd,
      (char *) oldpwd,
      MAX_PWD_NUM
    );
    cmhPrm[srcId].ssCmdPrm.CXXXpwd[MAX_PWD_NUM] = '\0';

    strncpy
    (
      (char *) cmhPrm[srcId].ssCmdPrm.CXXXnewPwd,
      (char *) newpwd,
      MAX_PWD_NUM
    );
    cmhPrm[srcId].ssCmdPrm.CXXXnewPwd[MAX_PWD_NUM] = '\0';

    strncpy
    (
      (char *) cmhPrm[srcId].ssCmdPrm.CXXXnewPwd2,
      (char *) newpwd,
      MAX_PWD_NUM
    );
    cmhPrm[srcId].ssCmdPrm.CXXXnewPwd2[MAX_PWD_NUM] = '\0';
    retCd = AT_EXCT;
  }
  else
  {
    /*
     *-------------------------------------------------------------------
     * if password relates to SIM
     *-------------------------------------------------------------------
     */
    switch (fac)
    {
      /*
       *---------------------------------------------------------------
       * change PIN 1 / PIN 2
       *---------------------------------------------------------------
       */
      case( FAC_Sc ):
      case( FAC_P2 ):
        if( simEntStat.curCmd NEQ AT_CMD_NONE )
          return( AT_BUSY );

        if( strlen( newpwd ) > PIN_LEN     OR
            strlen( newpwd ) < MIN_PIN_LEN OR
            strlen( oldpwd ) > PIN_LEN     OR
            strlen( oldpwd ) < MIN_PIN_LEN    )
        {
          ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
          return( AT_FAIL );
        }

        if( simEntStat.curCmd NEQ AT_CMD_NONE )
          return( AT_BUSY );

        cmhSIM_FillInPIN ( oldpwd, simShrdPrm.setPrm[srcId].curPIN, PIN_LEN );
        cmhSIM_FillInPIN ( newpwd, simShrdPrm.setPrm[srcId].newPIN, PIN_LEN );

        simShrdPrm.setPrm[srcId].PINType = (fac EQ FAC_Sc)?
                                   PHASE_2_PIN_1:PHASE_2_PIN_2;

        simEntStat.curCmd     = AT_CMD_CPWD;
        simShrdPrm.owner     = (T_OWN)srcId;
        simEntStat.entOwn     =  srcId;

        if( psaSIM_ChangePIN() < 0 )  /* change PIN */
        {
          TRACE_EVENT( "FATAL RETURN psaSIM in +CPWD" );
          ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal );
          return( AT_FAIL );
        }
        retCd = AT_EXCT;
        break;

#ifdef SIM_PERS
      case( FAC_Pn ):
      case( FAC_Pu ):
      case( FAC_Pc ):
      case( FAC_Pp ):
      case( FAC_Pf ):
      case( FAC_Ps ):
      case( FAC_Bl):
      {
        T_SIMLOCK_TYPE slocktype;
        T_OPER_RET_STATUS status;

        switch (fac)
        {
          case FAC_Pn: slocktype = SIMLOCK_NETWORK;          break;
          case FAC_Pu: slocktype = SIMLOCK_NETWORK_SUBSET;   break;
          case FAC_Pp: slocktype = SIMLOCK_SERVICE_PROVIDER; break;
          case FAC_Pc: slocktype = SIMLOCK_CORPORATE;        break;
          case FAC_Ps: slocktype = SIMLOCK_SIM;              break;
          case FAC_Pf: slocktype = SIMLOCK_FIRST_SIM;        break;
          case FAC_Bl: slocktype = SIMLOCK_BLOCKED_NETWORK;          break;
          default: slocktype = SIMLOCK_NETWORK;                   break;
         
        }

        status = aci_slock_change_password( slocktype, oldpwd, newpwd );
        if (status EQ OPER_SUCCESS)
          return(AT_CMPL);
        else if(status EQ OPER_FAIL )
        {
          ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_WrongPasswd );
          return( AT_FAIL );
        }
        else if (status EQ OPER_BLOCKED)
        {
          if(!aci_slock_set_CFG())
           {
             	  ACI_ERR_DESC( ACI_ERR_CLASS_Ext,EXT_ERR_NoMEPD); 
                 return( AT_FAIL );
           }
          aci_set_cme_error(slocktype); 
          MFREE(cfg_data); 
          return( AT_FAIL );
        }
      }
      retCd = AT_CMPL;
      break;
#endif

#ifdef FF_PHONE_LOCK
   case FAC_Pl:
   case FAC_Apl:
    {
       phone_lock_oper_ret_stat = aci_ext_set_phone_lock_key(oldpwd,newpwd); 	 
       return(cmhSS_check_oper_result(phone_lock_oper_ret_stat)); 
    }
#endif
    }
  }

/*
 *-------------------------------------------------------------------
 * log command execution
 *-------------------------------------------------------------------
 */
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  {
    T_ACI_CLOG cmdLog;        /* holds logging info */

    cmdLog.atCmd                = AT_CMD_CPWD;
    cmdLog.cmdType              = CLOG_TYPE_Set;
    cmdLog.retCode              = retCd;
    cmdLog.cId                  = ACI_NumParmNotPresent;
    cmdLog.sId                  = (ssCd EQ NOT_PRESENT_8BIT)?
                                     ACI_NumParmNotPresent:/*lint -e(644)*/sId+1;
    cmdLog.cmdPrm.sCPWD.srcId   = srcId;
    cmdLog.cmdPrm.sCPWD.fac     = fac;
    cmdLog.cmdPrm.sCPWD.oldpwd  = oldpwd;
    cmdLog.cmdPrm.sCPWD.newpwd  = newpwd;
  
    rAT_PercentCLOG( &cmdLog );
  }
#endif

  return( retCd );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSS                  |
| STATE   : code                  ROUTINE : sAT_PlusCCWA             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CCWA AT command
            which is responsible to set the parameters for call
            waiting supplementary services.

            <mode>   : CW mode.
            <class_type>: class of call.
*/

GLOBAL T_ACI_RETURN sAT_PlusCCWA  ( T_ACI_CMD_SRC     srcId,
                                    T_ACI_CCWA_MOD    mode,
                                    T_ACI_CLASS       class_type)
{
  SHORT sId1, sId2;         /* holds service id */
  UBYTE bst1, bst2;         /* holds basic service type */
  UBYTE bs1,  bs2;          /* holds basic service */
  BOOL  mltyTrnFlg = FALSE; /* flags for multi transaction */

   T_ACI_RETURN   retVal;
 
  TRACE_FUNCTION ("sAT_PlusCCWA ()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    return( AT_FAIL );
  }

  if( cmhPrm[srcId].ssCmdPrm.mltyTrnFlg NEQ 0 )

    return( AT_BUSY );

/*
 *-------------------------------------------------------------------
 * check parameter <class>
 *-------------------------------------------------------------------
 */
  if( !cmhSS_CheckClass( class_type, &bs1, &bst1, &bs2, &bst2, &mltyTrnFlg ))
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

/* SIM TOOLKIT & FDN HANDLING */
  if (mode NEQ CCWA_MOD_NotInterrogate)  /* mode should be valid */
  {
    retVal = cmhSS_CW_SAT_Handle( srcId, (T_ACI_CCFC_MOD)mode, class_type);

    if( retVal NEQ AT_CMPL )
        return( retVal );
  }


/*
 *-------------------------------------------------------------------
 * get a new service table entry to interrogate SS
 *-------------------------------------------------------------------
 */
  sId1 = psaSS_stbNewEntry();

  if( sId1 EQ NO_ENTRY )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
    return( AT_FAIL );
  }

  sId2 = NO_ENTRY;

  if( mltyTrnFlg )
  {
    ssShrdPrm.stb[sId1].ntryUsdFlg = TRUE;

    sId2 = psaSS_stbNewEntry();

    if( sId2 EQ NO_ENTRY )
    {
      ssShrdPrm.stb[sId1].ntryUsdFlg = FALSE;
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
      return( AT_FAIL );
    }
  }

/*
 *-------------------------------------------------------------------
 * check parameter <mode>
 *-------------------------------------------------------------------
 */
  switch( mode )
  {
    /*
     *---------------------------------------------------------------
     * lock and unlock call barring service
     *---------------------------------------------------------------
     */
    case( CCWA_MOD_Disable ):
    case( CCWA_MOD_Enable  ):

      CCD_START;

      if( mode EQ CCWA_MOD_Disable )
        psaSS_asmDeactivateSS( SS_CD_CW, bst1, bs1 );

      else if( mode EQ CCWA_MOD_Enable )
        psaSS_asmActivateSS( SS_CD_CW, bst1, bs1 );

      ssShrdPrm.stb[sId1].ntryUsdFlg = TRUE;
      ssShrdPrm.stb[sId1].ssCode     = SS_CD_CW;
      ssShrdPrm.stb[sId1].srvOwn     = (T_OWN)srcId;

      /* start first transaction */
      ssShrdPrm.stb[sId1].curCmd        = AT_CMD_CCWA;
      cmhSS_flagTrn( sId1, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg));
      psaSS_NewTrns(sId1);

      if( mltyTrnFlg )
      {
        if( mode EQ CCWA_MOD_Disable )
          psaSS_asmDeactivateSS( SS_CD_CW, bst2, bs2 );

        else if( mode EQ CCWA_MOD_Enable )
          psaSS_asmActivateSS( SS_CD_CW, bst2, bs2 );

        ssShrdPrm.stb[sId2].ntryUsdFlg = TRUE;
        ssShrdPrm.stb[sId2].ssCode     = SS_CD_CW;
        ssShrdPrm.stb[sId2].srvOwn     = (T_OWN)srcId;

        /* start second transaction */
        ssShrdPrm.stb[sId2].curCmd = AT_CMD_CCWA;
        cmhSS_flagTrn( sId2, &(ssShrdPrm.mltyTrnFlg)); /* only for the second one */
        cmhSS_flagTrn( sId2, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg));
        psaSS_NewTrns(sId2);
      }
      CCD_END;
      break;

    /*
     *---------------------------------------------------------------
     * unexpected mode
     *---------------------------------------------------------------
     */
    case( CCWA_MOD_NotInterrogate ):

      ssShrdPrm.stb[sId1].ntryUsdFlg = FALSE;
      return( AT_CMPL );

    default:

      ssShrdPrm.stb[sId1].ntryUsdFlg = FALSE;
      if( sId2 NEQ NO_ENTRY ) ssShrdPrm.stb[sId2].ntryUsdFlg = FALSE;

      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * log command execution
 *-------------------------------------------------------------------
 */
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  {
  T_ACI_CLOG cmdLog;        /* holds logging info */

  cmdLog.atCmd                = AT_CMD_CCWA;
  cmdLog.cmdType              = CLOG_TYPE_Set;
  cmdLog.retCode              = AT_EXCT;
  cmdLog.cId                  = ACI_NumParmNotPresent;
  cmdLog.sId                  = sId1+1;
  cmdLog.cmdPrm.sCCWA.srcId   = srcId;
  cmdLog.cmdPrm.sCCWA.mode    = mode;
  cmdLog.cmdPrm.sCCWA.class_type = class_type;

  rAT_PercentCLOG( &cmdLog );
  }
#endif

  return( AT_EXCT );
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSS                  |
| STATE   : code                  ROUTINE : sAT_PlusCUSD             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CUSD AT command
            which is responsible to invoke an unstructured
            supplementary services.

            <str> : USSD string.
            <dcs> : data coding scheme.
*/
LOCAL T_ACI_RETURN ussd_call_control_by_sim(T_ACI_CMD_SRC    srcId,
                                            T_ACI_USSD_DATA *str,
                                            SHORT            dcs)
{
  T_ACI_RETURN retCd = AT_CMPL;   /* holds return code */

#ifdef SIM_TOOLKIT
  T_sat_ussd    SATussd; /* to hold USSD string in case of SAT Control */
  T_CLPTY_PRM   *sat_ss_cldPty;

  if(!psaSIM_ChkSIMSrvSup( SRV_CalCntrl ))   /* call control by SAT enabled */
  {
    return(AT_CMPL);
  }

  if (psaSIM_ChkSIMSrvSup(SRV_USSDsupportInCC))
  {
    SATussd.dcs        = (UBYTE)dcs;
    SATussd.c_ussd_str = str->len;
    SATussd.ussd_str   = str->data;

    retCd = cmhSAT_USSDCntrlBySIM( &SATussd, (UBYTE)srcId );
  }
  else       /* USSD structure not known by SAT */
  {
    MALLOC(sat_ss_cldPty, sizeof(T_CLPTY_PRM));
    cmhCC_init_cldPty( sat_ss_cldPty );

    if( !utl_cvtGsmIra ( str -> data,
                         str->len,
                         (UBYTE *)sat_ss_cldPty->num,
                         MAX_USSD_DATA,
                         CSCS_DIR_IraToGsm ) )
    {
      TRACE_EVENT("utl_cvtGsmIra( ) returned FALSE");
      MFREE(sat_ss_cldPty);
      return( AT_FAIL );
    }
    retCd = cmhSAT_SSCntrlBySIM( sat_ss_cldPty, (UBYTE)srcId );
    MFREE(sat_ss_cldPty);
  }
  return( retCd );
#else
  return( AT_CMPL);
#endif /* of SIM_TOOLKIT */
}

GLOBAL T_ACI_RETURN sAT_PlusCUSD  ( T_ACI_CMD_SRC    srcId,
                                    T_ACI_USSD_DATA *str,
                                    SHORT            dcs)
{
  SHORT sId;            /* holds service id */
  T_ACI_RETURN retCd = AT_CMPL;   /* holds return code */
  UBYTE ussdLen;
  UBYTE *ussdString;
  UBYTE src_len;

  TRACE_FUNCTION ("sAT_PlusCUSD ()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    TRACE_EVENT_P1("Wrong source: %d", srcId);
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * check parameter str
 *-------------------------------------------------------------------
 */
  if( !str )
  {
    TRACE_EVENT("Empty string");
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * check parameter dcs
 *-------------------------------------------------------------------
 */
  if( dcs EQ ACI_NumParmNotPresent )

    dcs = 0;

/*
 *-------------------------------------------------------------------
 * check if there is a USSD request pending
 *-------------------------------------------------------------------
 */
  sId = psaSS_stbFindUssdReq();

  if( sId EQ NO_ENTRY )
  {
    /* check if there is another service in progress */
    if( psaSS_stbFindActSrv( sId ) NEQ NO_ENTRY )
    {
      TRACE_EVENT("Parallel USSD Transaction not allowed");
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_ParallelUSSD );
      return( AT_FAIL );
    }

    /* get new service table entry */
    sId = psaSS_stbNewEntry();
    if( sId EQ NO_ENTRY )
    {
      TRACE_EVENT("Service table is full");
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
      return( AT_FAIL );
    }

    /* check ussd call control by sim */
    retCd = ussd_call_control_by_sim(srcId, str, dcs);
    if(retCd NEQ AT_CMPL)
    {
      TRACE_EVENT_P1("ussd_call_control_by_sim() returned with %d", retCd);

      return( retCd );
    }

    CCD_START;

    MALLOC(ussdString, MAX_USSD_STRING);

    /* Implements Measure 25 */
    /* This function is more correct than utl_getAlphabetCb as it takes care 
       of reserved codings */
    if( cmh_getAlphabetCb( (UBYTE)dcs ) EQ 0 ) /* 7bit alphabet */
    {
      src_len = (UBYTE)MINIMUM( MAX_USSD_STRING, str->len);
      ussdLen = utl_cvt8To7( str->data,
                             src_len,
                             ussdString, 0 );
      /* According to spec 23.038 section 6.1.2.3 for USSD packing, for bytes end with
       * (8*n)-1 i.e where n is 1,2,3....i.e byte 7, 15, 23 ... to be padded 
       * with carriage return <CR>(0xD) 
       */
      if ((src_len+1)%8 EQ 0)
      {
        ussdString[ussdLen-1] |= (0xD << 1);
      }
    }
    else
    {
      ussdLen = str->len;
      memcpy(ussdString, str->data, MAX_USSD_STRING);
    }

    psaSS_asmProcUSSDReq( (UBYTE)dcs, ussdString, ussdLen );

    MFREE(ussdString);

    /* start new transaction */
    ssShrdPrm.stb[sId].ntryUsdFlg = TRUE;
    ssShrdPrm.stb[sId].curCmd     = AT_CMD_CUSD;
    ssShrdPrm.stb[sId].srvOwn     = (T_OWN)srcId;
    psaSS_NewTrns(sId);

    CCD_END;

    retCd = AT_CMPL;


  }
  else
  {
    CCD_START;

    psaSS_asmCnfUSSDReq( (UBYTE)dcs, str->data, str->len );

    ssShrdPrm.stb[sId].ussdReqFlg = FALSE;

    /* continue existing transaction */
    psaSS_CntTrns(sId);

    CCD_END;

    retCd = AT_CMPL;
  }

  ssShrdPrm.ussdLen = 0;

  /* save ussd string for possible version 1 retry */
  if( cmh_getAlphabetCb( (UBYTE)dcs ) EQ 0 ) /* 7bit alphabet */
  {
    if( str->len <= MAX_USSD_STRING )
    {
      ssShrdPrm.ussdLen = str->len;
      memcpy( ssShrdPrm.ussdBuf, str->data, str->len );
    }
  }

/*
 *-------------------------------------------------------------------
 * log command execution
 *-------------------------------------------------------------------
 */
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  {
  T_ACI_CLOG   cmdLog;  /* holds logging info */

  cmdLog.atCmd                = AT_CMD_CUSD;
  cmdLog.cmdType              = CLOG_TYPE_Set;
  cmdLog.retCode              = retCd;
  cmdLog.cId                  = ACI_NumParmNotPresent;
  cmdLog.sId                  = sId+1;
  cmdLog.cmdPrm.sCUSD.srcId   = srcId;
  cmdLog.cmdPrm.sCUSD.dcs     = dcs;
  cmdLog.cmdPrm.sCUSD.str     = str;

  rAT_PercentCLOG( &cmdLog );
  }
#endif

  return( retCd );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSS                  |
| STATE   : code                  ROUTINE : sAT_PercentCCBS          |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %CCBS AT command
            which is responsible to clear CCBS entries. Index value set
            to 0 indicates clear all entries.

            <idx>   : ccbs index
*/

GLOBAL T_ACI_RETURN sAT_PercentCCBS( T_ACI_CMD_SRC srcId,
                                     SHORT         idx  )
{
  SHORT sId;         /* holds service id */

  T_ACI_RETURN   retVal;
 
  TRACE_FUNCTION ("sAT_PercentCCBS ()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * check parameter idx
 *-------------------------------------------------------------------
 */
  if( idx EQ ACI_NumParmNotPresent OR idx > 5 OR idx < 0 )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

/* SIM TOOLKIT & FDN HANDLING */
    retVal = cmhSS_CCBS_SAT_Handle( srcId, CCBS_MOD_Erasure, idx);

    if( retVal NEQ AT_CMPL )
        return( retVal );
  

/*
 *-------------------------------------------------------------------
 * get a new service table entry to interrogate SS
 *-------------------------------------------------------------------
 */
  sId = psaSS_stbNewEntry();

  if( sId EQ NO_ENTRY )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * check parameter <mode>
 *-------------------------------------------------------------------
 */
  CCD_START;

  if( idx EQ 0 ) idx = KSD_IDX_NONE;

  psaSS_asmDeactivateCCBS((UBYTE)idx);

  ssShrdPrm.stb[sId].ntryUsdFlg = TRUE;
  ssShrdPrm.stb[sId].ssCode     = SS_CD_CCBS;
  ssShrdPrm.stb[sId].SSver      = MNCC_SS_VERSION_3;

  ssShrdPrm.stb[sId].srvOwn     = (T_OWN)srcId;

  ssShrdPrm.stb[sId].curCmd     = AT_CMD_CCBS;

  psaSS_NewTrns(sId);

  CCD_END;

/*
 *-------------------------------------------------------------------
 * log command execution
 *-------------------------------------------------------------------
 */
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  {
  T_ACI_CLOG cmdLog;        /* holds logging info */

  cmdLog.atCmd                = AT_CMD_CCBS;
  cmdLog.cmdType              = CLOG_TYPE_Set;
  cmdLog.retCode              = AT_EXCT;
  cmdLog.cId                  = ACI_NumParmNotPresent;
  cmdLog.sId                  = sId+1;
  cmdLog.cmdPrm.sCCBS.srcId   = srcId;
  cmdLog.cmdPrm.sCCBS.idx     = idx;

  rAT_PercentCLOG( &cmdLog );
  }
#endif

  return( AT_EXCT );
}

#ifdef TI_PS_FF_AT_P_CMD_CSCN
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSS                  |
| STATE   : code                  ROUTINE : sAT_PercentCSCN          |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %CSCN AT command
            which is responsible to set the switches for debugging 
            mode at terminal interface.
*/
GLOBAL T_ACI_RETURN sAT_PercentCSCN ( T_ACI_CMD_SRC srcId,
                                   T_ACI_SS_CSCN_MOD_STATE     ss_switch,
                                   T_ACI_SS_CSCN_MOD_DIRECTION ss_direction,
                                   T_ACI_CC_CSCN_MOD_STATE     cc_switch,
                                   T_ACI_CC_CSCN_MOD_DIRECTION cc_direction )
{
  TRACE_FUNCTION ("sAT_PercentCSCN ()");

  if(!cmh_IsVldCmdSrc (srcId))  /* check command source */
  {
    return( AT_FAIL );
  }

  if (ss_switch NEQ SS_CSCN_MOD_STATE_INVALID)
    cmhPrm[srcId].ssCmdPrm.CSCNss_mode.SsCSCNModeState     = ss_switch;

  if (ss_direction NEQ SS_CSCN_MOD_DIR_INVALID)
    cmhPrm[srcId].ssCmdPrm.CSCNss_mode.SsCSCNModeDirection = ss_direction;

  if (cc_switch NEQ CC_CSCN_MOD_STATE_INVALID)
    cmhPrm[srcId].ccCmdPrm.CSCNcc_mode.CcCSCNModeState     = cc_switch;

  if (cc_direction NEQ CC_CSCN_MOD_DIR_INVALID)
    cmhPrm[srcId].ccCmdPrm.CSCNcc_mode.CcCSCNModeDirection = cc_direction;

  return( AT_CMPL );
}
#endif /* TI_PS_FF_AT_P_CMD_CSCN */

#ifdef TI_PS_FF_AT_P_CMD_CUSDR
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSS                  |
| STATE   : code                  ROUTINE : sAT_PercentCUSDR         |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %CUSDR AT command
            which is responsible for extended user/MMI response to n/w
            initaiated USSD.
*/
GLOBAL T_ACI_RETURN sAT_PercentCUSDR(T_ACI_CMD_SRC srcId, T_ACI_CUSDR_RES response)
{
  TRACE_FUNCTION ("sAT_PercentCUSDR()");

  if(!cmh_IsVldCmdSrc (srcId))  /* check command source */
  {
    return( AT_FAIL );
  }

  if(cuscfgParams.Ext_USSD_Response EQ CUSCFG_STAT_Disabled)
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow );
    return( AT_FAIL );
  }

  if(Ext_USSD_Res_Pending EQ CUSDR_EXT_USSD_RES_Not_Pending OR Ext_USSD_Res_Pending_sId EQ (SHORT)NOT_PRESENT_8BIT)
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow );
    return( AT_FAIL );
  }

  switch(response)
  {
  case CUSDR_RES_Ok:
    if(Ext_USSD_Res_Pending NEQ CUSDR_EXT_USSD_RES_Request)
    {
      psaSS_asmEmptyRslt();
      psaSS_CntTrns(Ext_USSD_Res_Pending_sId);
    }
      Ext_USSD_Res_Pending = CUSDR_EXT_USSD_RES_Not_Pending;
      Ext_USSD_Res_Pending_sId = NOT_PRESENT_8BIT;
      return(AT_CMPL);

  case CUSDR_RES_Unknown_Alphabet:
    psaSS_asmErrorRslt( Ext_USSD_Res_Pending_sId, ERR_UNKNOWN_ALPHA );
    psaSS_CntTrns(Ext_USSD_Res_Pending_sId);
    ssShrdPrm.stb[Ext_USSD_Res_Pending_sId].ntryUsdFlg = FALSE;
    Ext_USSD_Res_Pending = CUSDR_EXT_USSD_RES_Not_Pending;
    Ext_USSD_Res_Pending_sId = NOT_PRESENT_8BIT;
    return(AT_CMPL);

  case CUSDR_RES_Busy:
    psaSS_asmErrorRslt( Ext_USSD_Res_Pending_sId, ERR_USSD_BUSY );
    psaSS_EndTrns(Ext_USSD_Res_Pending_sId);
    ssShrdPrm.stb[Ext_USSD_Res_Pending_sId].ntryUsdFlg = FALSE;
    Ext_USSD_Res_Pending = CUSDR_EXT_USSD_RES_Not_Pending;
    Ext_USSD_Res_Pending_sId = NOT_PRESENT_8BIT;
    return(AT_CMPL);

  default:
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );

  }

}
#endif /* TI_PS_FF_AT_P_CMD_CUSDR */

/*==== EOF ========================================================*/