view src/g23m-gprs/grr/grr_pgs.c @ 639:026c98f757a6

tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only As it turns out, there exist two different Huawei-made hw platforms both bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT. The two are NOT fw-compatible: aside from flash chip differences which should be handled by autodetection, the two hw platforms are already known to have different RFFEs with different control signals, and there may be other differences not yet known. Our current gtm900 build target is for MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence no support for that version will be possible until and unless someone provides one.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 18:19:01 +0000
parents 219afcfc6250
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  GRR
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module implements signal handler functions for service
|             PG of entity GRR.
+----------------------------------------------------------------------------- 
*/ 

#ifndef GRR_PGS_C
#define GRR_PGS_C
#endif

#define ENTITY_GRR

/*==== INCLUDES =============================================================*/

#include "typedefs.h"    /* to get Condat data types */

#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "gprs.h"
#include "gsm.h"        /* to get a lot of macros */
#include "ccdapi.h"     /* to get CCD API */
#include "cnf_grr.h"    /* to get cnf-definitions */
#include "mon_grr.h"    /* to get mon-definitions */
#include "prim.h"       /* to get the definitions of used SAP and directions */
#include "message.h"
#include "grr.h"        /* to get the global entity definitions */


#include "grr_ctrls.h"    /* */

#include "grr_f.h"        /* to get the global functions */
#include "grr_pgf.h"    /* */


/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/
/*
+------------------------------------------------------------------------------
| Function    : sig_ctrl_pg_start
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_CTRL_PG_START
|               PG has to manage the paging procedures according to network mode
|               and presence of PBCCH channel
| Parameters  : void
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ctrl_pg_start ( void ) 
{ 
  TRACE_ISIG( "sig_ctrl_pg_start" );

  switch( GET_STATE( PG ) )
  {
    case PG_TRANSFER:
      TRACE_ERROR("SIG_CTRL_PG_START not expected in transfer mode");
      break;
    case PG_NULL:
      SET_STATE(PG, PG_IDLE);
      
      /*lint -fallthrough*/

    default:
      /* Because of having new cell or new PPCH */
      psc_db->last_pg_mode = psc_db->network_pg_mode = REORG_PAGING;

      pg_handle_idle_mode( NULL_IDLE );
      break;
  }

} /* sig_ctrl_pg_start() */

/*
+------------------------------------------------------------------------------
| Function    : sig_ctrl_pg_stop
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_CTRL_PG_STOP
|
| Parameters  : void
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ctrl_pg_stop ( void ) 
{ 
  TRACE_ISIG( "sig_ctrl_pg_stop" );
  
  grr_data->pg.packet_mode = PACKET_MODE_NULL;
  SET_STATE(PG,PG_NULL);
  pg_send_stop();
  psc_db->last_pg_mode = psc_db->network_pg_mode = REORG_PAGING;
} /* sig_ctrl_pg_stop() */



/*
+------------------------------------------------------------------------------
| Function    : sig_ctrl_pg_mode_ind
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_CTRL_PG_MODE_IND
                This signal indicates whether the MS is in idle, transfer or access mode
|
| Parameters  : packet_mode
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ctrl_pg_mode_ind ( T_PACKET_MODE packet_mode) 
{ 
  T_PACKET_MODE old_packet_mode;

  TRACE_ISIG( "sig_ctrl_pg_mode_ind" );
  
  old_packet_mode          = grr_data->pg.packet_mode;
  grr_data->pg.packet_mode = packet_mode;

  switch( GET_STATE( PG ) )
  {
    case PG_IDLE:
      switch( packet_mode )
      {
        case PACKET_MODE_PTM:
          SET_STATE( PG, PG_TRANSFER );

          pg_handle_transfer_mode( IDLE_PTM );
          break;

        case PACKET_MODE_PAM:
          SET_STATE( PG, PG_ACCESS );

          pg_handle_access_mode( );
          break;

        default:
          break;
      }
      break;

    case PG_TRANSFER:
      switch( packet_mode )
      {
        case PACKET_MODE_PAM:
          SET_STATE( PG, PG_ACCESS );

          pg_handle_access_mode( );
          break;

        case PACKET_MODE_PIM:
          SET_STATE( PG, PG_IDLE );  

          pg_handle_non_drx_timers( );
          pg_handle_idle_mode( PTM_IDLE );
          break;

        case PACKET_MODE_PTM:
          //TODOif( grr_test_mode_active( ) )
          {
            sig_pg_ctrl_stop_mon_ccch( );
          }
          break;
      }
      break;

    case PG_ACCESS:
      switch( packet_mode )
      {
        case PACKET_MODE_PAM:
          if( old_packet_mode EQ PACKET_MODE_2P_PTM )
          {
            TRACE_EVENT( "PACKET_MODE_2P_PTM --> PACKET_MODE_PAM" );

            pg_handle_access_mode( );
          }
          break;

        case PACKET_MODE_2P_PTM:
          /* 
           * Do not change the state to PG_TRANSFER because of transition rule
           */
          TRACE_EVENT( "PACKET_MODE_2P_PTM in PG_ACCESS" );

          pg_handle_transfer_mode( ACCESS_PTM );
          break;          
 
        case PACKET_MODE_PIM:
          SET_STATE( PG, PG_IDLE );

          pg_handle_idle_mode( ACCESS_IDLE );
          break;

        case PACKET_MODE_PTM:
          SET_STATE( PG, PG_TRANSFER );

          pg_handle_transfer_mode( ACCESS_PTM );
          break;
      }
      break;    

    default:
      TRACE_ERROR( "SIG_CTRL_PG_MODE_IND unexpected" );
      break;
  }
}/* sig_ctrl_pg_mode_ind() */

/*
+------------------------------------------------------------------------------
| Function    : sig_ctrl_pg_t3172_run
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_CTRL_PG_T3172_RUN
|
| Parameters  : void
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ctrl_pg_t3172_run ( void) 
{ 
  TRACE_ISIG( "sig_ctrl_pg_t3172_run" );
  
} /* sig_ctrl_pg_t3172_run() */


/*
+------------------------------------------------------------------------------
| Function    : sig_ctrl_pg_indication
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_CTRL_PG_INDICATION. This 
|               signal indicates paging for packet access 
|
| Parameters  : UBYTE paging_type (IMSI or PTMSI(GPRS TMSI))
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ctrl_pg_indication ( UBYTE paging_type ) 
{ 
  UBYTE type;
  
  TRACE_ISIG( "sig_ctrl_pg_indication" );
  
  type = (paging_type EQ RRGRR_IMSI)? GMMRR_IMSI: GMMRR_PTMSI;
  
  switch( GET_STATE( PG ) )
  {
    case PG_IDLE:
      sig_pg_ctrl_downlink_transfer ( type );
      break;
    case PG_ACCESS:
      /* ignore PAGING REQUEST messages indicating a packet paging procedure*/
      break;
    default:
      TRACE_ERROR( "SIG_CTRL_PG_INDICATION unexpected" );
      break;
  }
} /* sig_ctrl_pg_indication() */

/*
+------------------------------------------------------------------------------
| Function    : sig_ctrl_pg_rr_est
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_CTRL_PG_RR_EST. This 
|               signal indicates paging for RR connection.
|               This signal makes no sense in case of Class C mobile
|
| Parameters  : no parameters
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_ctrl_pg_rr_est ( void) 
{ 
 
  TRACE_ISIG( "sig_ctrl_pg_rr_est" );
  
  if(grr_data->ms.class_of_mode EQ GMMRR_CLASS_CG)
  {
    TRACE_ERROR("CLASS_CG MS has received a RR_EST ");  
  }
  else
  {
    switch( GET_STATE( PG ) )
    {
      case PG_NULL:  
      case PG_IDLE:
      case PG_ACCESS:
        /* inform CTRL resp. GMM about the RR connection establishment request:
         *  GMM has to decide whether accept the request or not
         */
        sig_pg_ctrl_rr_est_req(PG_ON_CCCH);
        break;
      case PG_TRANSFER:
        if(grr_data->pg.nmo EQ GMMRR_NET_MODE_II)
        {
          TRACE_EVENT(" CS call in GMMRR_NET_MODE_II transfer mode");
          sig_pg_ctrl_rr_est_req(PG_ON_CCCH);
        }
        else
        {
          TRACE_EVENT_P1("CS call in transfer mode NMO_%d", grr_data->pg.nmo+1);
        }
        break;
      default:
        TRACE_ERROR( "SIG_CTRL_PG_RR_EST unexpected" );
        break;
    }
  }
} /* sig_ctrl_pg_indication() */



/*
+------------------------------------------------------------------------------
| Function    : sig_gfp_pg_req
+------------------------------------------------------------------------------
| Description : Handles
|
| Parameters  : void
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_gfp_pg_req ( void )
{ 
  MCAST( d_paging_req, D_PAGING_REQ );

  UBYTE state = GET_STATE( PG );

  TRACE_ISIG( "sig_gfp_pg_req" );

  switch( state )
  {
    case PG_IDLE:
    case PG_TRANSFER:
    case PG_ACCESS:
      pg_process_pp_req( d_paging_req, state );
      break;
    default:
      TRACE_ERROR( "sig_gfp_pg_req: page mode has no meaning in this state" );
      break;
  }
} /* sig_gfp_pg_req() */

/*
+------------------------------------------------------------------------------
| Function    : sig_gfp_pg_mode
+------------------------------------------------------------------------------
| Description : Handles 
|
| Parameters  : UBYTE page_mode:       requested page mode
|               BOOL  ms_paging_group: paging belongs to MS paging group
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_gfp_pg_mode ( UBYTE page_mode, BOOL ms_paging_group )
{ 
  TRACE_ISIG( "sig_gfp_pg_mode" );

  if( ms_paging_group )
  {
    switch( GET_STATE( PG ) )
    {
      case PG_IDLE:
        if( page_mode NEQ SAME_PAGING )
        {
          psc_db->network_pg_mode = page_mode;
        }

        if( grr_is_non_drx_period( ) EQ  FALSE                   AND
            psc_db->last_pg_mode     NEQ psc_db->network_pg_mode     )
        {
          /*
           * To ensure that the paging mode is not set to page normal in other states
           * than packet idle mode, the function grr_is_packet_idle_mode is called in
           * advance.
           *
           * State PG_IDLE not necessarily means that GRR is in packet idle mode. In
           * case GRR is currently executing the RRGRR_STOP_TASK_REQ/CNF procedure,
           * just the services CPAP and TC changes their states. All other services
           * remain in state IDLE, which is not quite correct. A similar scenario
           * occurs during execution of the MPHP_ASSIGNMENT_REQ/CON procedure.
           */
          if( grr_is_packet_idle_mode( ) EQ TRUE )
          {
            pg_send_start( psc_db->network_pg_mode );
          }
          else
          {
            TRACE_EVENT( "sig_gfp_pg_mode: Page mode set by next packet idle mode" );
          }
        }
        break;

      case PG_ACCESS:
        if( page_mode NEQ SAME_PAGING )
        {
          psc_db->network_pg_mode = page_mode;
        }
        break;

      default:

#ifdef _SIMULATION_

        TRACE_ERROR( "SIG_GFP_PG_MODE unexpected" );

#endif /* #ifdef _SIMULATION_ */

        break;
    }
  }
} /* sig_gfp_pg_mode() */

/*
+------------------------------------------------------------------------------
| Function    : sig_gfp_pg_stop_pccch_con
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_GFP_PG_STOP_PCCCH_CON
|
| Parameters  : mphp_stop_pccch_con: pointer to T_MPHP_STOP_PCCCH_CON
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_gfp_pg_stop_pccch_con ( T_MPHP_STOP_PCCCH_CON *mphp_stop_pccch_con) 
{ 
  TRACE_ISIG( "sig_gfp_pg_stop_pccch_con" );
} /* sig_gfp_pg_stop_pccch_con() */

/*
+------------------------------------------------------------------------------
| Function    : sig_cs_pg_start_t_nc2_ndrx
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_CS_PG_START_NC2_NDRX
|
| Parameters  : void
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_cs_pg_start_t_nc2_ndrx ( UBYTE nc_non_drx_period ) 
{ 
  TRACE_ISIG( "sig_cs_pg_start_t_nc2_ndrx" );

  pg_start_t_nc2_ndrx( nc_non_drx_period );

} /* sig_cs_pg_start_t_nc2_ndrx() */