;********************************************************************************
;*** File           : cc.mdf
;*** Creation       : Fri Jun 08 13:58:50 CST 2007
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Air Interface Message Specification
;*** Document Name  : cc
;*** Document No.   : 6147.600.97.108
;*** Document Date  : 2003-02-04
;*** Document Status: BEING_PROCESSED
;*** Document Author: LG
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Mon Nov 24 15:50:36 2003"
PRAGMA 	LAST_MODIFIED 	"2003-02-04"
PRAGMA 	ID_AND_VERSION 	"6147.600.97.108"



CONST 	L3MAX 	251 	; maximum size of a L3 buffer
CONST 	MAX_SS_VERSION 	1 	; maximum length in SS version



VALTAB 	VAL_access_ident
VAL 	DEF 	 	"reserved"
VAL 	0 	AI_OCT_ID 	"octet identifier"

VALTAB 	VAL_state
VAL 	DEF 	 	"reserved"
VAL 	0 	CS_0 	"null"
VAL 	2 	CS_01 	"MM connection pending"
VAL 	35 	CS_03 	"Wait for network information"
VAL 	37 	CS_05 	"CC-Establishment confirmed"
VAL 	38 	CS_06 	"Recall present"
VAL 	1 	CS_1 	"call initiated"
VAL 	3 	CS_3 	"mobile originating call proceeding"
VAL 	4 	CS_4 	"call delivered"
VAL 	6 	CS_6 	"call present"
VAL 	7 	CS_7 	"call received"
VAL 	8 	CS_8 	"connect request"
VAL 	9 	CS_9 	"mobile terminating call confirmed"
VAL 	10 	CS_10 	"active"
VAL 	11 	CS_11 	"disconnect request"
VAL 	12 	CS_12 	"disconnect indication"
VAL 	19 	CS_19 	"release request"
VAL 	26 	CS_26 	"mobile originating modify"
VAL 	27 	CS_27 	"mobile terminating modify"
VAL 	28 	CS_28 	"connect indication"

VALTAB 	VAL_cause
RANGE 	0 .. 31 	"Normal, unspecified"
RANGE 	32 .. 47 	"Resources unavailable, unspecified"
RANGE 	48 .. 63 	"Service or option not available, unspecified"
RANGE 	64 .. 79 	"Service or option not implemented, unspecified"
RANGE 	80 .. 95 	"Semantically incorrect message"
RANGE 	96 .. 111 	"Protocol error, unspecified"
RANGE 	112 .. 127 	"Interworking, unspecified"
VAL 	1 	CAUSE_UNASSIGN 	"Unassigned (unallocated) Note 9 number"
VAL 	3 	CAUSE_NO_ROUTE 	"No route to destination"
VAL 	6 	CAUSE_CHAN_UNACCEPT 	"Channel unacceptable"
VAL 	8 	CAUSE_BARRED 	"Operator determined barring"
VAL 	16 	CAUSE_CALL_CLEAR 	"Normal call clearing"
VAL 	17 	CAUSE_USER_BUSY 	"User busy"
VAL 	18 	CAUSE_NO_RESPONSE 	"No user responding"
VAL 	19 	CAUSE_ALERT_NO_ANSWER 	"User alerting, no answer"
VAL 	21 	CAUSE_CALL_REJECT 	"Call rejected"
VAL 	22 	CAUSE_NUM_CHANGED 	"Number changed"
VAL 	25 	CAUSE_PREEMPTION 	"Pre-emption"
VAL 	26 	CAUSE_USER_CLEAR 	"Non selected user clearing"
VAL 	27 	CAUSE_DEST_ORDER 	"Destination out of order"
VAL 	28 	CAUSE_NUM_FORMAT 	"Invalid number format (incomplete number)"
VAL 	29 	CAUSE_FACILITY_REJECT 	"Facility rejected"
VAL 	30 	CAUSE_STATUS_ENQUIRY 	"Response to STATUS ENQUIRY"
VAL 	31 	CAUSE_UNSPECIFIED 	"Normal, unspecified"
VAL 	34 	CAUSE_NO_CHAN_AVAIL 	"No circuit/channel available"
VAL 	38 	CAUSE_NETWORK_ORDER 	"Network out of order"
VAL 	41 	CAUSE_TEMP_FAIL 	"Temporary failure"
VAL 	42 	CAUSE_SWITCH_CONGEST 	"Switching equipment congestion"
VAL 	43 	CAUSE_INFO_DISCARD 	"Access information discarded"
VAL 	44 	CAUSE_REQ_CHAN_UNAVAIL 	"requested circuit/channel not available"
VAL 	47 	CAUSE_RESOURCE_UNAVAIL 	"Resources unavailable, unspecified"
VAL 	49 	CAUSE_QOS_UNAVAIL 	"Quality of service unavailable"
VAL 	50 	CAUSE_FACILITY_UNSUBSCRIB 	"Requested facility not subscribed"
VAL 	55 	CAUSE_BARRED_IN_CUG 	"Incoming calls barred within the CUG"
VAL 	57 	CAUSE_BEARER_CAP_AUTHORIZ 	"Bearer capability not authorized"
VAL 	58 	CAUSE_BEARER_CAP_UNAVAIL 	"Bearer capability not presently available"
VAL 	63 	CAUSE_SERVICE_UNAVAIL 	"Service or option not available, unspecified"
VAL 	65 	CAUSE_BEARER_NOT_IMPLEM 	"Bearer service not implemented"
VAL 	68 	CAUSE_ACM_MAX 	"ACM equal to or greater than ACMmax"
VAL 	69 	CAUSE_FACILITY_NOT_IMPLEM 	"Requested facility not implemented"
VAL 	70 	CAUSE_RESTICT_BEARER_CAP 	"Only restricted digital information bearer capability is available"
VAL 	79 	CAUSE_SERVICE_NOT_IMPLEM 	"Service or option not implemented, unspecified"
VAL 	81 	CAUSE_INVALID_TI 	"Invalid transaction identifier value"
VAL 	87 	CAUSE_USER_NOT_IN_CUG 	"User not member of CUG"
VAL 	88 	CAUSE_INCOMPAT_DEST 	"Incompatible destination"
VAL 	91 	CAUSE_INVALID_TRANS_NET 	"Invalid transit network selection"
VAL 	95 	CAUSE_INCORRECT_MESSAGE 	"Semantically incorrect message"
VAL 	96 	CAUSE_INVALID_MAND_INFO 	"Invalid mandatory information"
VAL 	97 	CAUSE_MESSAGE_TYPE_NOT_IMPLEM 	"Message type non-existent or not implemented"
VAL 	98 	CAUSE_MESSAGE_TYPE_INCOMPAT 	"Message type not compatible with protocol state"
VAL 	99 	CAUSE_INFO_ELEM_NOT_IMPLEM 	"Information element nonistent or not implemented"
VAL 	100 	CAUSE_COND_INFO_ELEM 	"Conditional IE error"
VAL 	101 	CAUSE_MESSAGE_INCOMPAT 	"Message not compatible with protocol state"
VAL 	102 	CAUSE_TIMER 	"Recovery on timer expiry"
VAL 	111 	CAUSE_PROTOCOL 	"Protocol error, unspecified"
VAL 	127 	CAUSE_INTERWORKING 	"Interworking, unspecified"

VALTAB 	VAL_code
VAL 	DEF 	 	"reserved"
VAL 	0 	CSTD_GSM 	"GSM standardized coding"

VALTAB 	VAL_cs
VAL 	0 	CS_Q931 	"standardized coding as described in CCITT Rec. Q.931"
VAL 	1 	CS_INTERNATIONAL 	"reserved for other international standards"
VAL 	2 	CS_NATIONAL 	"national standard"
VAL 	3 	CS_GSM_PLMN 	"standard defined for the GSM PLMNS as described in 10.86/GSM 04.08"

VALTAB 	VAL_compress
VAL 	0 	COMP_NO 	"data compression not possible"
VAL 	1 	COMP_YES 	"data compression possible"

VALTAB 	VAL_config
VAL 	DEF 	 	"reserved"
VAL 	0 	CONF_POINT_TO_POINT 	"point-to-point"

VALTAB 	VAL_congest_lev
VAL 	DEF 	 	"reserved"
VAL 	0 	CL_RECEIVER_READY 	"receiver ready"
VAL 	15 	CL_RECEIVER_NOT_READY 	"receiver not ready"

VALTAB 	VAL_conn_elem
VAL 	0 	CE_TRANSPA 	"transparent"
VAL 	1 	CE_RLP 	"non transparent (RLP)"
VAL 	2 	CE_TRANSPA_PREF 	"both, transparent preferred"
VAL 	3 	CE_RLP_PREF 	"both, non transparent preferred"

VALTAB 	VAL_dtmf
VAL 	0 	DTMF_EARLY 	"Reserved for earlier versions of the protocol."
VAL 	1 	DTMF_CURRENT 	"The mobile station supports DTMF as specified in section 5.5.7 of GSM 4.08."

VALTAB 	VAL_duplex
VAL 	0 	DUPLEX_HALF 	"half duplex"
VAL 	1 	DUPLEX_FULL 	"full duplex"

VALTAB 	VAL_establish
VAL 	DEF 	 	"reserved"
VAL 	0 	ESTAB_DEMAND 	"demand"

VALTAB 	VAL_hold
VAL 	0 	HLD_IDLE 	""
VAL 	1 	HLD_HOLD_REQ 	""
VAL 	2 	HLD_CALL_HELD 	""
VAL 	3 	HLD_RETRIEVE_REQ 	""

VALTAB 	VAL_trans_cap
VAL 	DEF 	 	"reserved"
VAL 	0 	ITC_SPEECH 	"speech"
VAL 	1 	ITC_DIGITAL_UNRESTRICTED 	"unrestricted digital information"
VAL 	2 	ITC_AUDIO 	"audio 3.1 kHz, ex PLMN"
VAL 	3 	ITC_FAX_GROUP_3 	"fascimile group 3"
VAL 	6 	ITC_AUXILIARY_SPEECH 	"Auxiliary speech"
VAL 	7 	ITC_NETWORK_RESERVED 	"reserved, to be used in the network."

VALTAB 	VAL_intermed_rate
VAL 	DEF 	 	"reserved"
VAL 	2 	IR_8_KBIT 	"8 kbit/s"
VAL 	3 	IR_16_KBIT 	"16 kbit/s"

VALTAB 	VAL_l1_ident
VAL 	DEF 	 	"reserved"
VAL 	1 	L1_OCT_ID 	"octet identifier"

VALTAB 	VAL_l2_ident
VAL 	DEF 	 	"reserved"
VAL 	2 	L2_OCT_ID 	"octet identifier"

VALTAB 	VAL_loc
VAL 	DEF 	 	"reserved"
VAL 	0 	LOC_USER 	"user"
VAL 	1 	LOC_PRIV_NET_LOCAL_USER 	"private network serving the local user"
VAL 	2 	LOC_PUB_NET_LOCAL_USER 	"public network serving the local user"
VAL 	3 	LOC_TRANSIT_NET 	"transit network"
VAL 	4 	LOC_PUB_NET_REMOTE_USER 	"public network serving the remote user"
VAL 	5 	LOC_PRIV_NET_REMOTE_USER 	"private network serving the remote user"
VAL 	7 	LOC_INTERNATIONAL_NET 	"international network"
VAL 	10 	LOC_BEYOND_POINT 	"network beyond interworking point"

VALTAB 	VAL_modem_type
VAL 	DEF 	 	"reserved"
VAL 	0 	MT_NONE 	"none"
VAL 	1 	MT_V21 	"V.21"
VAL 	2 	MT_V22 	"V.22"
VAL 	3 	MT_V22BIS 	"V.22 bis"
VAL 	4 	MT_V23 	"V.23"
VAL 	5 	MT_V26TER 	"V.26 ter"
VAL 	6 	MT_V32 	"V.32"
VAL 	7 	MT_UNDEF 	"modem for undefined interface"
VAL 	8 	MT_AUTO 	"autobauding type 1"

VALTAB 	VAL_mpty
VAL 	0 	MPTY_IDLE 	""
VAL 	1 	MPTY_REQ 	""
VAL 	2 	MPTY_CALL 	""
VAL 	3 	MPTY_SPLIT 	""

VALTAB 	VAL_negotiate
VAL 	DEF 	 	"reserved"
VAL 	0 	NEGOTIATE_NO 	"in-band negotiation not possible"

VALTAB 	VAL_nirr
VAL 	0 	NIRR_NO_MEANING 	"No meaning is associated with this value."
VAL 	1 	NIRR_DATA 	"Data up to and including 4.8 kb/s, full rate, non-transparent, 6 kb/s radio interface rate is requested."

VALTAB 	VAL_nic_rx
VAL 	0 	NIC_RX_NO 	"cannot accept data with network independent clock (i.e. sender does not support this optional procedure)"
VAL 	1 	NIC_RX_YES 	"can accept data with network independent clock (i.e. sender does support this optional procedure)"

VALTAB 	VAL_nic_tx
VAL 	0 	NIC_TX_NO 	"does not require to send data with network independent clock"
VAL 	1 	NIC_TX_YES 	"requires to send data with network independent clock"

VALTAB 	VAL_nd
VAL 	DEF 	 	"reserved"
VAL 	0 	ND_USER_SUSPEND 	""
VAL 	1 	ND_USED_RESUME 	""
VAL 	2 	ND_BEARER_CHANGE 	""

VALTAB 	VAL_npi
VAL 	DEF 	 	"reserved"
VAL 	0 	NPI_UNKNOWN 	"unknown"
VAL 	1 	NPI_ISDN 	"ISDN/telephony numbering plan (Rec. E.164/E.163)"
VAL 	3 	NPI_X121 	"data numbering plan (Recommendation X.121)"
VAL 	4 	NPI_F69 	"telex numbering plan (Recommendation F.69)"
VAL 	8 	NPI_NATIONAL 	"national numbering plan"
VAL 	9 	NPI_PRIVATE 	"private numbering plan"
VAL 	15 	NPI_EXTENSTION 	"reserved for extension"

VALTAB 	VAL_num_data
VAL 	0 	NDATA_7 	"7 bits"
VAL 	1 	NDATA_8 	"8 bits (this value is also used in the case of bit oriented protocols)"

VALTAB 	VAL_num_stop
VAL 	0 	NSTOP_1 	"1 bit (This value is also used in the case of synchronous mode)"
VAL 	1 	NSTOP_2 	"2 bits"

VALTAB 	VAL_odd_even
VAL 	0 	OE_EVEN 	"even number of address signals"
VAL 	1 	OE_ODD 	"odd number of address signals"

VALTAB 	VAL_parity
VAL 	DEF 	 	"reserved"
VAL 	0 	PARITY_ODD 	"odd"
VAL 	2 	PARITY_EVEN 	"even"
VAL 	3 	PARITY_NONE 	"none"
VAL 	4 	PARITY_0 	"forced to 0"
VAL 	5 	PARITY_1 	"forced to 1"

VALTAB 	VAL_present
VAL 	DEF 	 	"reserved"
VAL 	0 	PRES_ALLOWED 	"Presentation allowed"
VAL 	1 	PRES_RESTRICTED 	"Presentation restricted"
VAL 	2 	PRES_NOT_AVAIL 	"Number not available due to interworking"

VALTAB 	VAL_progress_desc
VAL 	DEF 	 	"Unspecific"
VAL 	1 	PROG_NO_END_TO_END_PLMN 	"Call is not end-to-end PLMN/ISDN, further call progress information may be available in-band"
VAL 	2 	PROG_DEST_NON_PLMN 	"Destination address in non-PLMN/ISDN"
VAL 	3 	PROG_ORIGIN_NON_PLMN 	"Origination address in non-PLMN/ISDN"
VAL 	4 	PROG_RETURN_TO_PLMN 	"Call has returned to the PLMN/ISDN"
VAL 	8 	PROG_INBAND_AVAIL 	"In-band information or appropriate pattern now available"
VAL 	32 	PROG_END_TO_END_PLMN 	"Call is end-to-end PLMN/ISDN"
VAL 	64 	PROG_QUEUEING 	"Queueing"

VALTAB 	VAL_rad_chan_req
VAL 	DEF 	 	"reserved"
VAL 	1 	RCR_FULL_ONLY 	"full rate support only mobile station"
VAL 	2 	RCR_HALF_PREF 	"dual rate support mobile station/half rate preferred"
VAL 	3 	RCR_FULL_PREF 	"dual rate support mobile station/full rate preferred"

VALTAB 	VAL_rate_adapt
VAL 	DEF 	 	"reserved"
VAL 	0 	RA_NONE 	"no rate adaption"
VAL 	1 	RA_V110 	"V.110/X.30 rate adaption"
VAL 	2 	RA_X31 	"CCITT X.31 flag stuffing"

VALTAB 	VAL_repeat
VAL 	1 	REPEAT_CIRCULAR 	"Circular for successive selection 'mode 1 alternate mode 2'"
VAL 	3 	REPEAT_SEQUENTIAL 	"Sequential for successive selection 'mode 1 and then mode 2'"

VALTAB 	VAL_screen
VAL 	0 	SCR_USER_UNSCREENED 	"User-provided, not screened"
VAL 	1 	SCR_USER_PASSED 	"User-provided, verified and passed"
VAL 	2 	SCR_USER_FAILED 	"User-provided, verified and failed"
VAL 	3 	SCR_NETWORD 	"Network provided"

VALTAB 	VAL_signal
VAL 	DEF 	 	"reserved"
VAL 	0 	SIGNAL_DIAL_ON 	"dial tone on"
VAL 	1 	SIGNAL_BACK_ON 	"ring back tone on"
VAL 	2 	SIGNAL_INTERCEPT_ON 	"intercept tone on"
VAL 	3 	SIGNAL_CONGEST_ON 	"network congestion tone on"
VAL 	4 	SIGNAL_BUSY_ON 	"busy tone on"
VAL 	5 	SIGNAL_CONFIRM_ON 	"confirm tone on"
VAL 	6 	SIGNAL_ANSWER_ON 	"answer tone on"
VAL 	7 	SIGNAL_WAITING_ON 	"call waiting tone on"
VAL 	8 	SIGNAL_HOOK_OFF_ON 	"off-hook warning tone on"
VAL 	63 	SIGNAL_TONES_OFF 	"tones off"
VAL 	79 	SIGNAL_ALERT_OFF 	"alerting off"

VALTAB 	VAL_sig_access_prot
VAL 	DEF 	 	"reserved"
VAL 	1 	SIAP_I440 	"I.440/450"
VAL 	2 	SIAP_X21 	"X.21"
VAL 	3 	SIAP_X28_INDIV_NUI 	"X.28 - dedicated PAD, individual NUI"
VAL 	4 	SIAP_X28_UNIV_NUI 	"X.28 - dedicated PAD, universal NUI"
VAL 	5 	SIAP_X28_NON_DEDIC 	"X.28 - non dedicated PAD"
VAL 	6 	SIAP_X32 	"X.32"

VALTAB 	VAL_structure
VAL 	DEF 	 	"reserved"
VAL 	0 	STRC_SERV_DATA_INTEG 	"service data unit integrity"
VAL 	3 	STRC_UNSTRUCTURED 	"unstructured"

VALTAB 	VAL_sync_async
VAL 	0 	SYNCHRONOUS 	"synchronous"
VAL 	1 	ASYNCHRONOUS 	"asynchronous"

VALTAB 	VAL_trans_mode
VAL 	0 	TM_CIRCUIT 	"circuit mode"
VAL 	1 	TM_PACKET 	"packet mode"

VALTAB 	VAL_ton
VAL 	DEF 	 	"reserved"
VAL 	0 	TON_UNKNOWN 	"unknown"
VAL 	1 	TON_INTERNATIONAL 	"international number"
VAL 	2 	TON_NATIONAL 	"national number"
VAL 	3 	TON_NETWORK 	"network specific number"
VAL 	4 	TON_DEDICATED 	"dedicated access, short code"
VAL 	7 	TON_EXTENSION 	"reserved for extention"

VALTAB 	VAL_tos
VAL 	DEF 	 	"reserved"
VAL 	0 	TOS_NSAP 	"NSAP (X.213/ISO 8348 AD2)"
VAL 	2 	TOS_USER 	"User specified"

VALTAB 	VAL_user_inf_l1_prot
VAL 	DEF 	 	"reserved"
VAL 	0 	L1_DEFAULT 	"default layer 1 protocol"

VALTAB 	VAL_user_inf_l2_prot
VAL 	DEF 	 	"reserved"
VAL 	6 	L2_X25 	"recommendation X.25, link level"
VAL 	8 	L2_ISO6429 	"ISO 6429, codeset 0 (DC1/DC3)"
VAL 	9 	L2_X75 	"X.75 layer 2 modified (teletex)"
VAL 	10 	L2_VIDEOTEX 	"videotex profile 1"
VAL 	12 	L2_COPFC 	"COPnoFlCt (Character oriented Protocol with no Flow Control mechanism)"

VALTAB 	VAL_user_rate
VAL 	DEF 	 	"reserved"
VAL 	1 	UR_0_3_KBIT 	"rate : 0.3 kbit/s Recommendation X.1 and V.110"
VAL 	2 	UR_1_2_KBIT 	"rate : 1.2 kbit/s Recommendation X.1 and V.110"
VAL 	3 	UR_2_4_KBIT 	"rate : 2.4 kbit/s Recommendation X.1 and V.110"
VAL 	4 	UR_4_8_KBIT 	"rate : 4.8 kbit/s Recommendation X.1 and V.110"
VAL 	5 	UR_9_6_KBIT 	"rate : 9.6 kbit/s Recommendation X.1 and V.110"
VAL 	6 	UR_12_0_KBIT_TRANS 	"rate : 12.0 kbit/s transparent"
VAL 	7 	UR_1_2_KBIT_V23 	"rate : 1.2 kbit/s/75 bit/s Recommendation V.23, X.1,V.110."

VALTAB 	VAL_pd
RANGE 	16 .. 63 	"Reserved for other network layer or through layer 3 protocols including Rec.X.25"
RANGE 	64 .. 79 	"National use"
RANGE 	80 .. 254 	"Reserved for other network through layer or layer 3 protocols including Rec.X.25"
VAL 	DEF 	 	"reserved"
VAL 	0 	PD_USER 	"User specific protocol"
VAL 	1 	PD_HIGH_LAYER 	"OSI high layer protocols"
VAL 	2 	PD_X244 	"X.244"
VAL 	3 	PD_SYS_MANAGE 	"Reserved for system management convergence function"
VAL 	4 	PD_IA5 	"IA5 characters"
VAL 	7 	PD_V120 	"Rec.V.120 rate adaption"
VAL 	8 	PD_Q931 	"Q.931 (I.451) user-network call control messages"

VALTAB 	VAL_speech_vers1
VAL 	0 	SPEECH_VERS_FR 	"full rate speech version 1"
VAL 	1 	SPEECH_VERS_HR 	"half rate speech version 1"
VAL 	2 	SPEECH_VERS_EFR 	"full rate speech version 2 (enhanced full rate)"
VAL 	5 	SPEECH_VERS_AMR_HR 	"half rate speech version 3 (AHS)"
VAL 	4 	SPEECH_VERS_AMR_FR 	"full rate speech version 3 (AFS)"
VAL 	0xF 	SPEECH_VERS_NONE 	"no speech version given"

VALTAB 	VAL_modem_type_2
VAL 	0 	OTHER_MODEM_TYPE_NONE 	"No other modem type specified"
VAL 	1 	OTHER_MODEM_TYPE_V32BIS 	"V.32bis"
VAL 	2 	OTHER_MODEM_TYPE_V34 	"V.34"

VALTAB 	VAL_fnur
VAL 	0 	FNUR_NOT_APPLICABLE 	"Fixed network user rate not applicable"
VAL 	1 	FNUR_9600 	"FNUR 9.6 kbit/s"
VAL 	2 	FNUR_14400 	"FNUR 14.4 kbit/s"
VAL 	3 	FNUR_19200 	"FNUR 19.2 kbit/s"
VAL 	4 	FNUR_28800 	"FNUR 28.8 kbit/s"
VAL 	5 	FNUR_38400 	"FNUR 38.4 kbit/s"
VAL 	6 	FNUR_48000 	"FNUR 48.0 kbit/s"
VAL 	7 	FNUR_56000 	"FNUR 56.0 kbit/s"
VAL 	8 	FNUR_64000 	"FNUR 64.0 kbit/s"

VALTAB 	VAL_acc
VAL 	0 	ACC_EMPTY 	"No channel codings acceptable"
VAL 	1 	ACC_48 	"TCH 4.8 acceptable"
VAL 	2 	ACC_96 	"TCH 9.6 acceptable"
VAL 	3 	ACC_48_96 	"TCH 4.8/9.6 acceptable"
VAL 	8 	ACC_144 	"TCH 14.4 acceptable"
VAL 	9 	ACC_48_144 	"TCH 4.8/14.4 acceptable"
VAL 	10 	ACC_96_144 	"TCH 9.6/14.4 acceptable"
VAL 	11 	ACC_ALL 	"All channel codings acceptable"

VALTAB 	VAL_mTch
VAL 	0 	MAX_TCH_1 	"Maximum of 1 TCH"
VAL 	1 	MAX_TCH_2 	"Maximum of 2 TCH"
VAL 	2 	MAX_TCH_3 	"Maximum of 3 TCH"
VAL 	3 	MAX_TCH_4 	"Maximum of 4 TCH"
VAL 	4 	MAX_TCH_5 	"Maximum of 5 TCH"
VAL 	5 	MAX_TCH_6 	"Maximum of 6 TCH"
VAL 	6 	MAX_TCH_7 	"Maximum of 7 TCH"
VAL 	7 	MAX_TCH_8 	"Maximum of 8 TCH"

VALTAB 	VAL_uimi
VAL 	0 	UIMI_NOT_ALLOWED 	"User initiated modification not allowed/required"
VAL 	1 	UIMI_MAX_1_TCH 	"User initiated modification up to 1 TCH/F"
VAL 	2 	UIMI_MAX_2_TCH 	"User initiated modification up to 2 TCH/F"
VAL 	3 	UIMI_MAX_3_TCH 	"User initiated modification up to 3 TCH/F"
VAL 	4 	UIMI_MAX_4_TCH 	"User initiated modification up to 4 TCH/F"

VALTAB 	VAL_waiur
VAL 	0 	WAIUR_NOT_APPLICABLE 	"Wanted Air Interface user rate not applicable"
VAL 	1 	WAIUR_9600 	"WAIUR 9.6 kbit/s"
VAL 	2 	WAIUR_14400 	"WAIUR 14.4 kbit/s"
VAL 	3 	WAIUR_19200 	"WAIUR 19.2 kbit/s"
VAL 	5 	WAIUR_28800 	"WAIUR 28.8 kbit/s"
VAL 	6 	WAIUR_38400 	"WAIUR 38.4 kbit/s"
VAL 	7 	WAIUR_43200 	"WAIUR 43.2 kbit/s"
VAL 	8 	WAIUR_57600 	"WAIUR 57.6 kbit/s"

VALTAB 	VAL_ccbs_act
VAL 	0 	CCBS_NO 	"CCBS is not possible"
VAL 	1 	CCBS_YES 	"CCBS is possible"

VALTAB 	VAL_pcp
VAL 	0 	PCP_NO 	"Mobile does not support prolonged clearing procedure"
VAL 	1 	PCP_YES 	"Mobile supports prolonged clearing procedure"

VALTAB 	VAL_rcl_type
VAL 	0 	CCBS 	"CCBS"
VAL 	1 	CCBS_1 	"Shall be treated as CCBS (intended for other similar types of Recall)"
VAL 	2 	CCBS_2 	"Shall be treated as CCBS (intended for other similar types of Recall)"
VAL 	3 	CCBS_3 	"Shall be treated as CCBS (intended for other similar types of Recall)"
VAL 	4 	CCBS_4 	"Shall be treated as CCBS (intended for other similar types of Recall)"
VAL 	5 	CCBS_5 	"Shall be treated as CCBS (intended for other similar types of Recall)"
VAL 	6 	CCBS_6 	"Shall be treated as CCBS (intended for other similar types of Recall)"

VALTAB 	VAL_coding_bc3x1
VAL 	0 	CODING_BC3X_SPEECH 	"Octet 3x of IE Bearer Capabilities indicates speech codec version"
VAL 	1 	CODING_BC3X_OTHER 	"Octet 3x of IE Bearer Capabilities used for other extension of octet 3"

VALTAB 	VAL_ctm
VAL 	0 	CTM_NO 	"Mobile does not support prolonged clearing procedure"
VAL 	1 	CTM_YES 	"Mobile supports prolonged clearing procedure"




VAR 	access_ident 	"Access identity" 	
 	2

VAL 	@m_cc - VAL_access_ident@ 	

VAR 	state 	"Call state value" 	
 	6

VAL 	@m_cc - VAL_state@ 	

VAR 	cause 	"Cause value" 	
 	7

VAL 	@m_cc - VAL_cause@ 	

VAR 	code 	"Coding standard" 	
 	1

VAL 	@m_cc - VAL_code@ 	

VAR 	cs 	"Coding standard" 	
 	2

VAL 	@m_cc - VAL_cs@ 	

VAR 	compress 	"Compression" 	
 	1

VAL 	@m_cc - VAL_compress@ 	

VAR 	config 	"Configuration" 	
 	1

VAL 	@m_cc - VAL_config@ 	

VAR 	congest_lev 	"Congestion level" 	
 	4

VAL 	@m_cc - VAL_congest_lev@ 	

VAR 	conn_elem 	"Connection element" 	
 	2

VAL 	@m_cc - VAL_conn_elem@ 	

VAR 	diag 	"Diagnostics" 	
 	8


VAR 	dtmf 	"DTMF" 	
 	1

VAL 	@m_cc - VAL_dtmf@ 	

VAR 	duplex 	"Duplex mode" 	
 	1

VAL 	@m_cc - VAL_duplex@ 	

VAR 	establish 	"Establishment" 	
 	1

VAL 	@m_cc - VAL_establish@ 	

VAR 	ext_hlci 	"Extended high layer characteristics identification" 	
 	7


VAR 	fac 	"Facility information" 	
 	8


VAR 	hlci 	"High layer characteristics identification" 	
 	7


VAR 	hold 	"Hold auxiliary state" 	
 	2

VAL 	@m_cc - VAL_hold@ 	

VAR 	trans_cap 	"Information transfer capability" 	
 	3

VAL 	@m_cc - VAL_trans_cap@ 	

VAR 	intermed_rate 	"Intermediate rate" 	
 	2

VAL 	@m_cc - VAL_intermed_rate@ 	

VAR 	interpret 	"Interpretation" 	
 	3


VAR 	key 	"Keypad information" 	
 	7


VAR 	l1_ident 	"Layer 1 identity" 	
 	2

VAL 	@m_cc - VAL_l1_ident@ 	

VAR 	l2_ident 	"Layer 2 identity" 	
 	2

VAL 	@m_cc - VAL_l2_ident@ 	

VAR 	loc 	"Location" 	
 	4

VAL 	@m_cc - VAL_loc@ 	

VAR 	llc 	"Low layer information" 	
 	8


VAR 	msg_type 	"Message Type" 	
 	8


VAR 	modem_type 	"Modem type" 	
 	5

VAL 	@m_cc - VAL_modem_type@ 	

VAR 	mpty 	"Multi party auxiliary state" 	
 	2

VAL 	@m_cc - VAL_mpty@ 	

VAR 	negotiate 	"Negotiation" 	
 	1

VAL 	@m_cc - VAL_negotiate@ 	

VAR 	nirr 	"Negotiation of intermediate rate request" 	
 	1

VAL 	@m_cc - VAL_nirr@ 	

VAR 	nic_rx 	"Network independent clock on Rx" 	
 	1

VAL 	@m_cc - VAL_nic_rx@ 	

VAR 	nic_tx 	"Network independent clock on Tx" 	
 	1

VAL 	@m_cc - VAL_nic_tx@ 	

VAR 	nd 	"Notification description" 	
 	7

VAL 	@m_cc - VAL_nd@ 	

VAR 	num 	"Number digit" 	
 	4


VAR 	npi 	"Numbering plan identification" 	
 	4

VAL 	@m_cc - VAL_npi@ 	

VAR 	num_data 	"Number of data bits" 	
 	1

VAL 	@m_cc - VAL_num_data@ 	

VAR 	num_stop 	"Number of stop bits" 	
 	1

VAL 	@m_cc - VAL_num_stop@ 	

VAR 	odd_even 	"Odd / even indication" 	
 	1

VAL 	@m_cc - VAL_odd_even@ 	

VAR 	parity 	"Parity" 	
 	3

VAL 	@m_cc - VAL_parity@ 	

VAR 	present 	"Presentation indicator" 	
 	2

VAL 	@m_cc - VAL_present@ 	

VAR 	prot_prof 	"Presentation method of protocol profile" 	
 	2


VAR 	progress_desc 	"Progress description" 	
 	7

VAL 	@m_cc - VAL_progress_desc@ 	

VAR 	rad_chan_req 	"Radio channel requirement" 	
 	2

VAL 	@m_cc - VAL_rad_chan_req@ 	

VAR 	rate_adapt 	"Rate adaption" 	
 	2

VAL 	@m_cc - VAL_rate_adapt@ 	

VAR 	rec 	"Recommendation" 	
 	7


VAR 	repeat 	"Repeat indicator" 	
 	4

VAL 	@m_cc - VAL_repeat@ 	

VAR 	repeat_2 	"Repeat indicator" 	
 	4

VAL 	@m_cc - VAL_repeat@ 	

VAR 	repeat_3 	"Repeat indicator" 	
 	4

VAL 	@m_cc - VAL_repeat@ 	

VAR 	screen 	"Screening indicator" 	
 	2

VAL 	@m_cc - VAL_screen@ 	

VAR 	signal 	"Signal" 	
 	8

VAL 	@m_cc - VAL_signal@ 	

VAR 	sig_access_prot 	"Signalling access protocol" 	
 	3

VAL 	@m_cc - VAL_sig_access_prot@ 	

VAR 	ver 	"SS version information" 	
 	8


VAR 	structure 	"Structure" 	
 	2

VAL 	@m_cc - VAL_structure@ 	

VAR 	subaddr 	"Subaddress information" 	
 	8


VAR 	sync_async 	"Synchronous / Asyncronous" 	
 	1

VAL 	@m_cc - VAL_sync_async@ 	

VAR 	trans_mode 	"Transfer mode" 	
 	1

VAL 	@m_cc - VAL_trans_mode@ 	

VAR 	ton 	"Type of number" 	
 	3

VAL 	@m_cc - VAL_ton@ 	

VAR 	tos 	"Type of subaddress" 	
 	3

VAL 	@m_cc - VAL_tos@ 	

VAR 	user_inf_l1_prot 	"User information layer 1 protocol" 	
 	4

VAL 	@m_cc - VAL_user_inf_l1_prot@ 	

VAR 	user_inf_l2_prot 	"User information layer 2 protocol" 	
 	5

VAL 	@m_cc - VAL_user_inf_l2_prot@ 	

VAR 	user_rate 	"User rate" 	
 	4

VAL 	@m_cc - VAL_user_rate@ 	

VAR 	info 	"User-user information" 	
 	8


VAR 	pd 	"User-user protocol discriminator" 	
 	8

VAL 	@m_cc - VAL_pd@ 	

VAR 	speech_vers1 	"Speech Version Indication No. 1" 	
 	4

VAL 	@m_cc - VAL_speech_vers1@ 	

VAR 	speech_vers2 	"Speech Version Indication No. 2" 	
 	4

VAL 	@m_cc - VAL_speech_vers1@ 	

VAR 	speech_vers3 	"Speech Version Indication No. 3" 	
 	4

VAL 	@m_cc - VAL_speech_vers1@ 	

VAR 	speech_vers4 	"Speech Version Indication No. 4" 	
 	4

VAL 	@m_cc - VAL_speech_vers1@ 	

VAR 	speech_vers5 	"Speech Version Indication No. 5" 	
 	4

VAL 	@m_cc - VAL_speech_vers1@ 	

VAR 	modem_type_2 	"Other Modem Type" 	
 	2

VAL 	@m_cc - VAL_modem_type_2@ 	

VAR 	fnur 	"Fixed Network User Rate" 	
 	5

VAL 	@m_cc - VAL_fnur@ 	

VAR 	acc 	"Acceptable Channel Codings" 	
 	4

VAL 	@m_cc - VAL_acc@ 	

VAR 	mTch 	"Maximum Traffic Channels" 	
 	3

VAL 	@m_cc - VAL_mTch@ 	

VAR 	uimi 	"User Initiated Modification Ind" 	
 	3

VAL 	@m_cc - VAL_uimi@ 	

VAR 	waiur 	"Wanted Air Interface User Rate" 	
 	4

VAL 	@m_cc - VAL_waiur@ 	

VAR 	ccbs_act 	"ccbs_activation" 	
 	1

VAL 	@m_cc - VAL_ccbs_act@ 	

VAR 	pcp 	"PCP" 	
 	1

VAL 	@m_cc - VAL_pcp@ 	

VAR 	rcl_type 	"Recall Type" 	
 	3

VAL 	@m_cc - VAL_rcl_type@ 	

VAR 	setup_msg 	"Setup message" 	
 	8


VAR 	coding_bc3x1 	"Meaning of BC octet 3a" 	
 	1

VAL 	@m_cc - VAL_coding_bc3x1@ 	

VAR 	coding_bc3x2 	"Meaning of BC octet 3b" 	
 	1

VAL 	@m_cc - VAL_coding_bc3x1@ 	

VAR 	coding_bc3x3 	"Meaning of BC octet 3c" 	
 	1

VAL 	@m_cc - VAL_coding_bc3x1@ 	

VAR 	coding_bc3x4 	"Meaning of BC octet 3d" 	
 	1

VAL 	@m_cc - VAL_coding_bc3x1@ 	

VAR 	coding_bc3x5 	"Meaning of BC octet 3e" 	
 	1

VAL 	@m_cc - VAL_coding_bc3x1@ 	

VAR 	ctm 	"Support of CTM text telephony" 	
 	1

VAL 	@m_cc - VAL_ctm@ 	




COMP 	aux_states 	"Auxiliary states"
{
 	+ 	.000  ; Spare
 	 	hold 	 ; Hold auxiliary state
 	* 	 	mpty 	 ; MPTY auxiliary state
}



COMP 	bearer_cap 	"Bearer capability"
{
 	+ 	 	rad_chan_req 	 ; Radio channel requirement
 	 	code 	 ; Coding standard
 	 	trans_mode 	 ; Transfer mode
 	- 	 	trans_cap 	 ; Information transfer capability
 	 	coding_bc3x1 	 ; Meaning of octet 3a
 	 	ctm 	 ; Support of CTM text telephony
 	.0  ; Spare
 	- 	 	speech_vers1 	 ; Speech version indication no. 1
 	 	coding_bc3x2 	 ; Meaning of octet 3b
 	.00  ; Spare
 	- 	 	speech_vers2 	 ; Speech version indication no. 2
 	 	coding_bc3x3 	 ; Meaning of octet 3c
 	.00  ; Spare
 	- 	 	speech_vers3 	 ; Speech version indication no. 3
 	 	coding_bc3x4 	 ; Meaning of octet 3d
 	.00  ; Spare
 	- 	 	speech_vers4 	 ; Speech version indication no. 4
 	 	coding_bc3x5 	 ; Meaning of octet 3e
 	.00  ; Spare
 	* 	 	speech_vers5 	 ; Speech version indication no. 5
 	+ 	 	compress 	 ; Compression
 	 	structure 	 ; Structure
 	 	duplex 	 ; Duplex mode
 	 	config 	 ; Configuration
 	 	nirr 	 ; Negotiation of intermed. rate req.
 	* 	 	establish 	 ; Establishment
 	+ 	 	access_ident 	 ; Access identity
 	 	rate_adapt 	 ; Rate adaption
 	* 	 	sig_access_prot 	 ; Signalling access protocol
 	+ 	 	l1_ident 	 ; Layer 1 identity
 	 	user_inf_l1_prot 	 ; User information layer 1 protocol
 	- 	 	sync_async 	 ; Synchronous / Asyncronous
 	 	num_stop 	 ; Number of stop bits
 	 	negotiate 	 ; Negotiation
 	 	num_data 	 ; Number of data bits
 	- 	 	user_rate 	 ; User rate
 	 	intermed_rate 	 ; Intermediate rate
 	 	nic_tx 	 ; Network independent clock on Tx
 	 	nic_rx 	 ; Network independent clock on Rx
 	- 	 	parity 	 ; Parity
 	 	conn_elem 	 ; Connection element
 	- 	 	modem_type 	 ; Modem type
 	 	modem_type_2 	 ; Other Modem type
 	- 	 	fnur 	 ; Fixed network user rate
 	 	acc 	 ; Acceptable Channel Codings
 	- 	 	mTch 	 ; Maximum Traffic Channels
 	 	uimi 	 ; User initiated Modification Ind
 	* 	 	waiur 	 ; Wanted Air Interface User Rate
 	+ 	 	l2_ident 	 ; Layer 2 identity
 	* 	 	user_inf_l2_prot 	 ; User information layer 2 protocol
}
TYPEDEF COMP bearer_cap 	bearer_cap_2 	"Bearer capability"



COMP 	call_ctrl_cap 	"Call Control Capabilities"
{
 	.000000  ; Spare
 	 	pcp 	 ; PCP
 	 	dtmf 	 ; DTMF
}



COMP 	call_state 	"Call state"
{
 	 	cs 	 ; Coding standard II
 	 	state 	 ; Call state value
}



COMP 	dl_called_num 	"Called party BCD number"
{
 	+ 	 	ton 	 ; Type of number
 	* 	 	npi 	 ; Numbering plan identification
 	BCDEVEN  	num 	[0..32] 	 ; Number digit
}



COMP 	ul_called_num 	"Called party BCD number"
{
 	+ 	 	ton 	 ; Type of number
 	* 	 	npi 	 ; Numbering plan identification
 	BCDEVEN  	num 	[0..80] 	 ; Number digit
}



COMP 	called_subaddr 	"Called party subaddress"
{
 	+ 	 	tos 	 ; Type of subaddress
 	 	odd_even 	 ; Odd / even indication
 	* 	.000  ; Spare
 	 	subaddr 	[0..20] 	 ; Subaddress information
}



COMP 	calling_num 	"Calling party BCD number"
{
 	+ 	 	ton 	 ; Type of number
 	- 	 	npi 	 ; Numbering plan identification
 	 	present 	 ; Presentation indicator
 	.000  ; Spare
 	* 	 	screen 	 ; Screening indicator
 	BCDEVEN  	num 	[0..22] 	 ; Number digit (0..20)
}



COMP 	calling_subaddr 	"Calling party subaddress"
{
 	+ 	 	tos 	 ; Type of subaddress
 	 	odd_even 	 ; Odd / even Indication
 	* 	.000  ; spare
 	 	subaddr 	[0..20] 	 ; Subaddress information
}



COMP 	cc_cause 	"Cause"
{
 	+ 	 	cs 	 ; Coding standard II
 	.0  ; Spare
 	- 	 	loc 	 ; Location
 	* 	 	rec 	 ; Recommendation
 	* 	 	cause 	 ; Cause value
 	 	diag 	[0..27] 	 ; Diagnostics
}
TYPEDEF COMP cc_cause 	cc_cause_2 	"Cause"



COMP 	clir_suppr 	"CLIR suppression"
{
}



COMP 	clir_invoc 	"CLIR invocation"
{
}



COMP 	connect_num 	"Connected number"
{
 	+ 	 	ton 	 ; Type of number
 	- 	 	npi 	 ; Number plan identification
 	 	present 	 ; Presentation indicator
 	.000  ; Spare
 	* 	 	screen 	 ; Screening indicator
 	BCDEVEN  	num 	[0..22] 	 ; Number digit
}



COMP 	connect_subaddr 	"Connected subaddress"
{
 	+ 	 	tos 	 ; Type of subaddress
 	 	odd_even 	 ; Odd / even indicator
 	* 	.000  ; Spare
 	 	subaddr 	[0..20] 	 ; Subaddress information
}



COMP 	facility 	"Facility"
{
 	 	fac 	[0..L3MAX] 	 ; Facility information
}
TYPEDEF COMP facility 	fac_adv 	"Facility"



COMP 	high_layer_comp 	"High layer compatibility"
{
 	+ 	 	cs 	 ; Coding standard II
 	 	interpret 	 ; Interpretation
 	* 	 	prot_prof 	 ; Presentation method of protocol profile
 	+ 	 	hlci 	 ; High layer characteristics identification
 	* 	 	ext_hlci 	 ; Extended high layer characteristics identification
}
TYPEDEF COMP high_layer_comp 	high_layer_comp_2 	"High layer compatibility"



COMP 	key_facility 	"Keypad facility"
{
 	.0  ; Spare
 	 	key 	 ; Keypad information
}



COMP 	low_layer_comp 	"Low layer compatibility"
{
 	 	llc 	[0..13] 	 ; Low layer information
}
TYPEDEF COMP low_layer_comp 	low_layer_comp_2 	"Low layer compatibility"



COMP 	more_data 	"More data"
{
}



COMP 	notific 	"Notification indicator"
{
 	* 	 	nd 	 ; Notification description
}



COMP 	progress 	"Progress indicator"
{
 	+ 	 	cs 	 ; Coding standard II
 	.0  ; Spare
 	* 	 	loc 	 ; Location
 	* 	 	progress_desc 	 ; Progress description
}



COMP 	reverse_call 	"Reverse call setup direction"
{
}



COMP 	ss_version 	"SS Version Indicator"
{
 	 	ver 	[0.. MAX_SS_VERSION] 	 ; SS version information
}



COMP 	user_user 	"User-user"
{
 	 	pd 	 ; User-user protocol discriminator
 	 	info 	[0..131] 	 ; User-user information
}



COMP 	allowed_actions 	"Allowed Actions"
{
 	 	ccbs_act 	 ; ccbs_activation
 	.0000000  ; Spare
}



COMP 	recall_type 	"Recall Type"
{
 	.00000  ; Spare
 	 	rcl_type 	 ; recall_type
}



COMP 	setup_cont 	"Setup Container"
{
 	 	setup_msg 	[0..L3MAX] 	 ; Setup message
}



COMP 	redirecting_num 	"Redirecting party BCD number"
{
 	+ 	 	ton 	 ; Type of number
 	- 	 	npi 	 ; Numbering plan identification
 	 	present 	 ; Presentation indicator
 	.000  ; Spare
 	* 	 	screen 	 ; Screening indicator
 	BCDEVEN  	num 	[0..32] 	 ; Number digits
}



COMP 	redirecting_subaddr 	"Redirection party subaddress"
{
 	+ 	 	tos 	 ; Type of subaddress
 	 	odd_even 	 ; Odd / even Indication
 	* 	.000  ; spare
 	 	subaddr 	[0..20] 	 ; Subaddress information
}






MSG 	d_alert 	downlink 	0b00000001 ; Alerting
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_TLV  	facility 	0x1C 	 ; Facility
 	GSM4_TLV  	progress 	0x1E 	 ; Progress indicator
 	GSM4_TLV  	user_user 	0x7E 	 ; User-user
}



MSG 	u_alert 	uplink 	0b00000001 ; Alerting
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_TLV  	facility 	0x1C 	 ; Facility
 	GSM4_TLV  	user_user 	0x7E 	 ; User-user
 	GSM4_TLV  	ss_version 	0x7F 	 ; SS version
}



MSG 	u_call_conf 	uplink 	0b00001000 ; Call confirmed
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_TV  	repeat 	0x0D 	 ; Repeat Indicator
 	GSM4_TLV  	bearer_cap 	0x04 	 ; Bearer capability 1
 	GSM4_TLV  	bearer_cap_2 	0x04 	 ; Bearer capability 2
 	GSM4_TLV  	cc_cause 	0x08 	 ; CC Cause
 	GSM4_TLV  	call_ctrl_cap 	0x15 	 ; CC Capabilities
}



MSG 	d_call_proceed 	downlink 	0b00000010 ; Call proceeding
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_TV  	repeat 	0x0D 	 ; Repeat Indicator
 	GSM4_TLV  	bearer_cap 	0x04 	 ; Bearer capability 1
 	GSM4_TLV  	bearer_cap_2 	0x04 	 ; Bearer capability 2
 	GSM4_TLV  	facility 	0x1C 	 ; Facility
 	GSM4_TLV  	progress 	0x1E 	 ; Progress indicator
}



MSG 	b_congest_ctrl 	both 	0b00111001 ; Congestion control
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_V  	congest_lev 	 ; Congestion level
 	.0000  ; Spare half octet
 	GSM4_TLV  	cc_cause 	0x08 	 ; CC Cause
}



MSG 	d_connect 	downlink 	0b00000111 ; Connect
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_TLV  	facility 	0x1C 	 ; Facility
 	GSM4_TLV  	progress 	0x1E 	 ; Progress indicator
 	GSM4_TLV  	connect_num 	0x4C 	 ; Connected number
 	GSM4_TLV  	connect_subaddr 	0x4D 	 ; Connected subaddress
 	GSM4_TLV  	user_user 	0x7E 	 ; User-user
}



MSG 	u_connect 	uplink 	0b00000111 ; Connect
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_TLV  	facility 	0x1C 	 ; Facility
 	GSM4_TLV  	connect_subaddr 	0x4D 	 ; Connected subaddress
 	GSM4_TLV  	user_user 	0x7E 	 ; User-user
 	GSM4_TLV  	ss_version 	0x7F 	 ; SS version
}



MSG 	b_connect_ack 	both 	0b00001111 ; Connect acknowledge
{
 	GSM3_V  	msg_type 	 ; Message Type
}



MSG 	d_disconnect 	downlink 	0b00100101 ; Disconnect
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	cc_cause 	 ; CC Cause
 	GSM4_TLV  	facility 	0x1C 	 ; Facility
 	GSM4_TLV  	progress 	0x1E 	 ; Progress indicator
 	GSM4_TLV  	user_user 	0x7E 	 ; User-user
 	GSM4_TLV  	allowed_actions 	0x7B 	 ; Allowed Actions
}



MSG 	u_disconnect 	uplink 	0b00100101 ; Disconnect
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	cc_cause 	 ; CC Cause
 	GSM4_TLV  	facility 	0x1C 	 ; Facility
 	GSM4_TLV  	user_user 	0x7E 	 ; User-user
 	GSM4_TLV  	ss_version 	0x7F 	 ; SS version
}



MSG 	u_emerge_setup 	uplink 	0b00001110 ; Emergency setup
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_TLV  	bearer_cap 	0x04 	 ; Bearer capability
}



MSG 	d_facility 	downlink 	0b00111010 ; Facility
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	facility 	 ; Facility
}



MSG 	u_facility 	uplink 	0b00111010 ; Facility
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	facility 	 ; Facility
 	GSM4_TLV  	ss_version 	0x7F 	 ; SS version
}



MSG 	u_hold 	uplink 	0b00011000 ; Hold
{
 	GSM3_V  	msg_type 	 ; Message Type
}



MSG 	d_hold_ack 	downlink 	0b00011001 ; Hold Acknowledge
{
 	GSM3_V  	msg_type 	 ; Message Type
}



MSG 	d_hold_rej 	downlink 	0b00011010 ; Hold Reject
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	cc_cause 	 ; CC Cause
}



MSG 	b_modify 	both 	0b00010111 ; Modify
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	bearer_cap 	 ; Bearer capability
 	GSM4_TLV  	low_layer_comp 	0x7C 	 ; Low layer comp.
 	GSM4_TLV  	high_layer_comp 	0x7D 	 ; High layer comp.
 	GSM2_T  	reverse_call 	0xA3 	 ; Reverse call setup direction direction
}



MSG 	b_modify_comp 	both 	0b00011111 ; Modify complete
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	bearer_cap 	 ; Bearer capability
 	GSM4_TLV  	low_layer_comp 	0x7C 	 ; Low layer comp.
 	GSM4_TLV  	high_layer_comp 	0x7D 	 ; High layer comp.
 	GSM2_T  	reverse_call 	0xA3 	 ; Reverse call setup direction direction
}



MSG 	b_modify_rej 	both 	0b00010011 ; Modify reject
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	bearer_cap 	 ; Bearer capability
 	GSM4_LV  	cc_cause 	 ; CC Cause
 	GSM4_TLV  	low_layer_comp 	0x7C 	 ; Low layer comp.
 	GSM4_TLV  	high_layer_comp 	0x7D 	 ; High layer comp.
}



MSG 	b_notify 	both 	0b00111110 ; Notify
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM3_V  	notific 	 ; Notification indicator
}



MSG 	d_progress 	downlink 	0b00000011 ; Progress
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	progress 	 ; Progress indicator
 	GSM4_TLV  	user_user 	0x7E 	 ; User-user
}



MSG 	d_release 	downlink 	0b00101101 ; Release
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_TLV  	cc_cause 	0x08 	 ; CC Cause
 	GSM4_TLV  	cc_cause_2 	0x08 	 ; Second cause
 	GSM4_TLV  	facility 	0x1C 	 ; Facility
 	GSM4_TLV  	user_user 	0x7E 	 ; User-user
}



MSG 	u_release 	uplink 	0b00101101 ; Release
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_TLV  	cc_cause 	0x08 	 ; CC Cause
 	GSM4_TLV  	cc_cause_2 	0x08 	 ; Second cause
 	GSM4_TLV  	facility 	0x1C 	 ; Facility
 	GSM4_TLV  	user_user 	0x7E 	 ; User-user
 	GSM4_TLV  	ss_version 	0x7F 	 ; SS version
}



MSG 	d_release_comp 	downlink 	0b00101010 ; Release complete
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_TLV  	cc_cause 	0x08 	 ; CC Cause
 	GSM4_TLV  	facility 	0x1C 	 ; Facility
 	GSM4_TLV  	user_user 	0x7E 	 ; User-user
}



MSG 	u_release_comp 	uplink 	0b00101010 ; Release complete
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_TLV  	cc_cause 	0x08 	 ; CC Cause
 	GSM4_TLV  	facility 	0x1C 	 ; Facility
 	GSM4_TLV  	user_user 	0x7E 	 ; User-user
 	GSM4_TLV  	ss_version 	0x7F 	 ; SS version
}



MSG 	u_retrieve 	uplink 	0b00011100 ; Retrieve
{
 	GSM3_V  	msg_type 	 ; Message Type
}



MSG 	d_retrieve_ack 	downlink 	0b00011101 ; Retrieve Acknowledge
{
 	GSM3_V  	msg_type 	 ; Message Type
}



MSG 	d_retrieve_rej 	downlink 	0b00011110 ; Retrieve Reject
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	cc_cause 	 ; CC Cause
}



MSG 	d_setup 	downlink 	0b00000101 ; Setup
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_TV  	repeat 	0x0D 	 ; BC repeat indicator
 	GSM4_TLV  	bearer_cap 	0x04 	 ; Bearer capability 1
 	GSM4_TLV  	bearer_cap_2 	0x04 	 ; Bearer capability 2
 	GSM4_TLV  	facility 	0x1C 	 ; Facility
 	GSM4_TLV  	progress 	0x1E 	 ; Progress indicator
 	GSM3_TV  	signal 	0x34 	 ; Signal
 	GSM4_TLV  	calling_num 	0x5C 	 ; Calling party number BCD
 	GSM4_TLV  	calling_subaddr 	0x5D 	 ; Calling party sub-address
 	GSM4_TLV  	dl_called_num 	0x5E 	 ; Called party BCD number
 	GSM4_TLV  	called_subaddr 	0x6D 	 ; Called party sub-address
 	GSM4_TLV  	redirecting_num 	0x74 	 ; Redirecting party BCD number
 	GSM4_TLV  	redirecting_subaddr 	0x75 	 ; Redirecting party sub-address
 	GSM1_TV  	repeat_2 	0x0D 	 ; LLC repeat indicator
 	GSM4_TLV  	low_layer_comp 	0x7C 	 ; Low layer compatibility I
 	GSM4_TLV  	low_layer_comp_2 	0x7C 	 ; Low layer compatibility II
 	GSM1_TV  	repeat_3 	0x0D 	 ; HLC repeat indicator
 	GSM4_TLV  	high_layer_comp 	0x7D 	 ; High layer compatibility i
 	GSM4_TLV  	high_layer_comp_2 	0x7D 	 ; High layer compatibility ii
 	GSM4_TLV  	user_user 	0x7E 	 ; User-user
}



MSG 	u_setup 	uplink 	0b00000101 ; Setup
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_TV  	repeat 	0x0D 	 ; BC repeat indicator
 	GSM4_TLV  	bearer_cap 	0x04 	 ; Bearer capability 1
 	GSM4_TLV  	bearer_cap_2 	0x04 	 ; Bearer capability 2
 	GSM4_TLV  	facility 	0x1C 	 ; Facility (simple recall alignment)
 	GSM4_TLV  	calling_subaddr 	0x5D 	 ; Calling party sub-address
 	GSM4_TLV  	ul_called_num 	0x5E 	 ; Called party BCD number
 	GSM4_TLV  	called_subaddr 	0x6D 	 ; Called party sub-address
 	GSM1_TV  	repeat_2 	0x0D 	 ; LLC repeat indicator
 	GSM4_TLV  	low_layer_comp 	0x7C 	 ; Low layer compatibility I
 	GSM4_TLV  	low_layer_comp_2 	0x7C 	 ; Low layer compatibility II
 	GSM1_TV  	repeat_3 	0x0D 	 ; HLC repeat indicator
 	GSM4_TLV  	high_layer_comp 	0x7D 	 ; High layer compatibility i
 	GSM4_TLV  	high_layer_comp_2 	0x7D 	 ; High layer compatibility ii
 	GSM4_TLV  	user_user 	0x7E 	 ; User-user
 	GSM4_TLV  	ss_version 	0x7F 	 ; SS version
 	GSM2_T  	clir_suppr 	0xA1 	 ; CLIR suppression
 	GSM2_T  	clir_invoc 	0xA2 	 ; CLIR invocation
 	GSM4_TLV  	call_ctrl_cap 	0x15 	 ; CC capabilities
 	GSM4_TLV  	fac_adv 	0x1D 	 ; Facility (advanced recall alignment)
}



MSG 	u_start_dtmf 	uplink 	0b00110101 ; Start DTMF
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM3_TV  	key_facility 	0x2C 	 ; Keypad facility
}



MSG 	d_start_dtmf_ack 	downlink 	0b00110110 ; Start DTMF Acknowledge
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM3_TV  	key_facility 	0x2C 	 ; Keypad facility
}



MSG 	d_start_dtmf_rej 	downlink 	0b00110111 ; Start DTMF reject
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	cc_cause 	 ; CC Cause
}



MSG 	b_status 	both 	0b00111101 ; Status
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	cc_cause 	 ; CC Cause
 	GSM3_V  	call_state 	 ; Call state
 	GSM4_TLV  	aux_states 	0x24 	 ; Auxiliary states
}



MSG 	b_status_enq 	both 	0b00110100 ; Status enquiry
{
 	GSM3_V  	msg_type 	 ; Message Type
}



MSG 	u_stop_dtmf 	uplink 	0b00110001 ; Stop DTMF
{
 	GSM3_V  	msg_type 	 ; Message Type
}



MSG 	d_stop_dtmf_ack 	downlink 	0b00110010 ; Stop DTMF acknowledge
{
 	GSM3_V  	msg_type 	 ; Message Type
}



MSG 	b_user_info 	both 	0b00010000 ; User information
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	user_user 	 ; User-user
 	GSM2_T  	more_data 	0xA0 	 ; More data
}



MSG 	u_start_cc 	uplink 	0b00001001 ; Start_CC
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_TLV  	call_ctrl_cap 	0x15 	 ; CC Capabilities
}



MSG 	d_recall 	downlink 	0b00001011 ; Recall
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM3_V  	recall_type 	 ; Recall Type
 	GSM4_LV  	facility 	 ; Facility
}



MSG 	u_cc_est_conf 	uplink 	0b00000110 ; CC-Establishment confirmed
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_TV  	repeat 	0x0D 	 ; Repeat Indicator
 	GSM4_TLV  	bearer_cap 	0x04 	 ; Bearer capability 1
 	GSM4_TLV  	bearer_cap_2 	0x04 	 ; Bearer capability 2
 	GSM4_TLV  	cc_cause 	0x08 	 ; CC Cause
}



MSG 	d_cc_establishment 	downlink 	0b00000100 ; CC-Establishment
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	setup_cont 	 ; Setup Container
}