FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-locosto/p_rrlp.val @ 605:07d0dc4431f4
bootloader.s: same MEMIF fix as in int.s plus DPLL BYPASS fix
Both MEMIF and DPLL settings are now the same between int.s and bootloader.s
assembly code paths. Previously bootloader.s was setting DPLL BYPASS /2 mode,
which persisted until _INT_Initialize code with the bootloader body omitted,
or was changed to /1 in the hardware init function in the
bootloader.lib:start.obj module.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 17 Jun 2019 18:40:32 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_rrlp.val | | SOURCE : "sap\rrlp.pdf" | | LastModified : "2002-11-13" | | IdAndVersion : "8443.102.02.100" | | SrcFileTime : "Thu Nov 29 09:53:06 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_RRLP_VAL #define P_RRLP_VAL #define CDG_ENTER__P_RRLP_VAL #define CDG_ENTER__FILENAME _P_RRLP_VAL #define CDG_ENTER__P_RRLP_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_RRLP_VAL__LAST_MODIFIED _2002_11_13 #define CDG_ENTER__P_RRLP_VAL__ID_AND_VERSION _8443_102_02_100 #define CDG_ENTER__P_RRLP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_53_06_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_RRLP_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_cause */ #define RRLP_METHOD_INVALID (0x7) /* Position method is not supported */ #define RRLP_REF_BTS_INVALID (0xa) /* The ref. BTS for E-OTD is not the serving BTS */ #define RRLP_HANDOVER (0x14) /* The measurement procedure was interrupted by a handover. No RRLP specific error message is created. */ /* * Value constants for VAL_exp_otd */ /* * Value constants for VAL_loc_method */ #define EOTD_METHOD (0x0) #define GPS_METOD (0x1) #define GPS_OR_EOTD_METOD (0x2) /* * Value constants for VAL_mfrm_offset */ /* * Value constants for VAL_otd_type */ #define ROUGH_RTD (0x0) /* only rough RTD has been provided by the NW */ #define EXPECTED_OTD (0x1) /* only expectedOTD has been provided by the NW */ #define BOTH_OTD (0x2) /* Both OTD / RTD types have been provided by the NW */ /* * Value constants for VAL_pos_method */ #define MS_ASSISTED (0x0) #define MS_BASED (0x1) #define MS_BASED_PREF (0x2) #define MS_ASSISTED_PREF (0x3) /* * Value constants for VAL_rough_rtd */ /* * Value constants for VAL_ta_correction_present */ #define TA_PRESENT (0x1) /* TA present */ #define TA_NOT_PRESENT (0x0) /* TA NOT present */ /* * Value constants for VAL_uncertainty */ #define UNC_MAX_2BIT (0x0) /* uncertainty in bits. 0 - 2 bits */ #define UNC_MAX_4BIT (0x1) /* uncertainty in bits. 3 - 4 bits */ #define UNC_MAX_8BIT (0x2) /* uncertainty in bits. 5 - 8 bits */ #define UNC_MAX_12BIT (0x3) /* uncertainty in bits. 9 - 12 bits */ #define UNC_MAX_16BIT (0x4) /* uncertainty in bits. 13 - 16 bits */ #define UNC_MAX_22BIT (0x5) /* uncertainty in bits. 17 - 22 bits */ #define UNC_MAX_30BIT (0x6) /* uncertainty in bits. 23 - 30 bits */ #define UNC_GT_30BIT (0x7) /* uncertainty in bits. > 30 bits */ /* * user defined constants */ #define R_NUM_MEAS_SETS (0x3) #define R_MAX_REF_NEIGH_BTS (0xf) #define MAX_NCELL_EOTD (0xf) #include "CDG_LEAVE.h" #endif