FreeCalypso > hg > fc-magnetite

view src/cs/drivers/drv_app/lcc/lcc_modulate.h @ 605:07d0dc4431f4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
bootloader.s: same MEMIF fix as in int.s plus DPLL BYPASS fix Both MEMIF and DPLL settings are now the same between int.s and bootloader.s assembly code paths. Previously bootloader.s was setting DPLL BYPASS /2 mode, which persisted until _INT_Initialize code with the bootloader body omitted, or was changed to /1 in the hardware init function in the bootloader.lib:start.obj module.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 17 Jun 2019 18:40:32 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/******************************************************************************
 * Power Task (pwr)
 * Design and coding by Svend Kristian Lindholm, skl@ti.com
 *
 * PWR SW Modulation
 *
 * $Id: pwr_modulate.h 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $
 *
 ******************************************************************************/
#ifndef __LCC_MODULATE_H__
#define __LCC_MODULATE_H__

#include "lcc/lcc.h"
#include "lcc/lcc_cfg.h"

// SW modulation using the following addresses
#if (USE_PWL_AS_MODULATOR == 1)
// D-Sample - no modulation - just envelope function to simulate GPIO 6
    #define PWL_LEVEL_REG (*(volatile unsigned char*) 0xFFFE8000)
    #define PWL_CTRL_REG  (*(volatile unsigned char*) 0xFFFE8001)
    #define BUZZ_LIGHT_REG (*(volatile short*) 0xFFFE480E) // Enable buzzer (bit 0) and PWL (bit 1)
#endif
/******************************************************************************
 * Function prototypes
 ******************************************************************************/

void pwr_modulate_init(void);
void pwr_modulate_on(void);
void pwr_modulate_off(void);

#endif