+
−# This patch applies to the Init_Target() function in the init.obj module in
+
−# main.lib; it is an example of how this code will need to be patched for
+
−# running on our own future FreeCalypso hardware if we choose to use the same
+
−# Spansion S71PL129NC0 flash+pSRAM MCP as used in the Pirelli DP-L10 and use
+
−# the same memory timings as set by Pirelli's firmware.
+
−
+
−[init.obj]
+
−
+
−# value goes into nCS0, nCS1 and nCS3 config registers
+
−.text 66 A4
+
−# value goes into nCS2 config reg
+
−.text 6C A4
+
−
+
−# nop out the write into 0x02700000
+
−
+
−.text 128 C0
+
−.text 129 46