FreeCalypso > hg > fc-magnetite
view cdg3/msg/t30.mdf @ 258:13bcc2ed7e44
configure.sh & targets/*.conf: emit FLASH_BASE_ADDR & FLASH_SECTOR_SIZE
into the generated Makefile
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 04 Aug 2017 07:14:16 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : t30.mdf ;*** Creation : Thu Jun 19 15:32:14 CST 2008 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Air Interface Message Specification ;*** Document Name : t30 ;*** Document No. : 8411.620.98.101 ;*** Document Date : 2000-02-04 ;*** Document Status: BEING_PROCESSED ;*** Document Author: UB ;******************************************************************************** PRAGMA SRC_FILE_TIME "Wed Nov 28 10:21:26 2007" PRAGMA LAST_MODIFIED "2000-02-04" PRAGMA ID_AND_VERSION "8411.620.98.101" CONST MAX_NSF_LEN 720 ; number of bits in non-standard facility element. VALTAB VAL_v8 VAL 0 v8_not_avail "V.8 is not available" VAL 1 v8_avail "V.8 is available" VALTAB VAL_n_byte VAL 0 NB_256_BYTES "256 octets preferred in ECM" VAL 1 NB_64_BYTES "64 octets preferred in ECM" VALTAB VAL_ready_tx_fax VAL 0 RTF_NO_TX_RDY "not ready to transmit a facsimile document" VAL 1 RTF_TX_RDY "ready to transmit a facsimile document" VALTAB VAL_rec_fax_op VAL 0 RFO_NO_RX_RDY "not ready to receive a facsimile document" VAL 1 RFO_RX_RDY "ready to receive a facsimile document" VALTAB VAL_data_sig_rate VAL DEF "undefined signalling rate" VAL 0 DSR_2400_V27 "signalling rate 2400 bps V.27 ter" VAL 4 DSR_4800_V27 "signalling rate 4800 bps V.27 ter" VAL 12 DSR_7200_V29 "signalling rate 7200 bps V.29" VAL 13 DSR_7200_V17 "signalling rate 7200 bps V.17" VAL 8 DSR_9600_V29 "signalling rate 9600 bps V.29" VAL 9 DSR_9600_V17 "signalling rate 9600 bps V.17" VAL 5 DSR_12000_V17 "signalling rate 12000 bps V.17" VAL 1 DSR_14000_V17 "signalling rate 14400 bps V.19" VALTAB VAL_R8_lines_pels VAL 0 R8LP_R8_ONLY "vertical resolution is specified by R8 only" VAL 1 R8LP_R8_EXTENDED "vertical resolution is specified not only by R8" VALTAB VAL_two_dim_coding VAL 0 TDC_NO_2D_CODING "no 2D T.4 coding" VAL 1 TDC_2D_CODING "2D T.4 coding" VALTAB VAL_rec_width VAL 0 RW_WIDTH_215_MM "Scan line length of 215 mm" VAL 1 RW_WIDTH_303_MM "Scan line length of 215, 255 and 303 mm" VAL 2 RW_WIDTH_255_MM "Scan line length of 215 and 255 mm" VAL 3 RW_WIDTH_INVALID "Invalid scan line length" VALTAB VAL_max_rec_len VAL 0 MRL_A4 "Maximum recording length A4 (297 mm)" VAL 1 MRL_UNLIMITED "Unlimited recording length" VAL 2 MRL_B4 "Maximum recording length B4 (364 mm)" VAL 3 MRL_INVALID "Invalid recording length" VALTAB VAL_min_scan_time VAL 0 MST_20_MS "20 ms at 3.85 1/mm: T7.7 = T3.85" VAL 1 MST_40_MS "40 ms at 3.85 1/mm: T7.7 = T3.85" VAL 2 MST_10_MS "10 ms at 3.85 1/mm: T7.7 = T3.85" VAL 3 MST_5_MS "5 ms at 3.85 1/mm: T7.7 = T3.85" VAL 4 MST_10_MS_HALF "10 ms at 3.85 1/mm: T7.7 = 1/2 T3.85" VAL 5 MST_20_MS_HALF "20 ms at 3.85 1/mm: T7.7 = 1/2 T3.85" VAL 6 MST_40_MS_HALF "40 ms at 3.85 1/mm: T7.7 = 1/2 T3.85" VAL 7 MST_0_MS "0 ms at 3.85 1/mm: T7.7 = T3.85" VALTAB VAL_uncomp_mode VAL 0 UCM_COMPRESSED "T.4 data (can be send)/(are) in compressed mode" VAL 1 UCM_UNCOMPRESSED "T.4 data (can be send)/(are) in uncompressed mode" VALTAB VAL_err_corr_mode VAL 0 ECM_OFF "Error correction mode is not possible/off" VAL 1 ECM_ON "Error correction mode is possible/on" VALTAB VAL_t6_coding VAL 0 T6_CODING_OFF "T.6 coding is not possible/off" VAL 1 T6_CODING_ON "T.6 coding is possible/on" VALTAB VAL_R8_lines VAL 0 R8_LINES_OFF "R8 x 15.4 lines/mm is not possible/off" VAL 1 R8_LINES_ON "R8 x 15.4 lines/mm is possible/on" VALTAB VAL_r_300_pels VAL 0 R300_PELS_OFF "Res 300 x 300 pels /25.4 mm is not possible/off" VAL 1 R300_PELS_ON "Res 300 x 300 pels /25.4 mm is possible/on" VALTAB VAL_R16_lines_pels VAL 0 R16_LINES_PELS_OFF "R16 x 15.4 lines/mm and/or 400 x 400 pels/24.4 mm mode is not possible/off" VAL 1 R16_LINES_PELS_ON "R16 x 15.4 lines/mm and/or 400 x 400 pels/24.4 mm mode is possible/on" VALTAB VAL_i_res_pref VAL 0 IRP_NO_INCH_BASED "Inch-based resolution not preferred" VAL 1 IRP_INCH_BASED "Inch-based resolution preferred" VALTAB VAL_m_res_pref VAL 0 IRP_NO_METRIC_BASED "Metric-based resolution not preferred" VAL 1 IRP_METRIC_BASED "Metric-based resolution preferred" VALTAB VAL_min_scan_time_hr VAL 0 MST_T154_EQ_T77 "T15.4 = T7.7" VAL 1 MST_T154_EQ_HALF_T77 "T15.4 = 0.5 x T7.7" VALTAB VAL_sel_polling VAL 0 SEP_NO_POLLING "Selective polling not possible" VAL 1 SEP_POLLING "Selective polling possible" VALTAB VAL_subaddr VAL 0 SA_NO_SUBADDRESSING "Sub-addressing is not possible/intended" VAL 1 SA_SUBADDRESSNIG "Sub-addressing is possible/intended" VALTAB VAL_password VAL 0 PW_NO_PASSWORD "Password checking is not possible/intended" VAL 1 PW_PASSWORD "Password checking is possible/intended" VALTAB VAL_ready_tx_doc VAL 0 RTD_TX_READY "Ready to transmit a data file" VAL 1 RTD_NOT_TX_READY "Not ready to transmit a data file" VALTAB VAL_bft VAL 0 BFT_NO_BIN_FILE_TX "Not possible/intended to transmit a binary file" VAL 1 BFT_BIN_FILE_TX "Possibility/intention to transmit a binary file" VALTAB VAL_dtm VAL 0 DTM_NO_DOC_TX_MODE "Not possible/intended to perform the DTM" VAL 1 DTM_DOC_TX_MODE "Possibility/intention to perform the DTM" VALTAB VAL_edi VAL 0 EDI_NO_ELEC_DATA_XCHNG "Not possible/intended to perform EDI" VAL 1 EDI_ELEC_DATA_XCHNG "Possibility/intention to perform EDI" VALTAB VAL_btm VAL 0 BTM_NO_BASIC_TRANS_MODE "Not possible/intended to perform the BTM" VAL 1 BTM_BASIC_TRANS_MODE "Possibility/intention to perform the BTM" VALTAB VAL_ready_tx_mixed VAL 0 RTM_NO_READY_TX_MIXED "Not ready to transmit a character or mixed mode document" VAL 1 RTM_READY_TX_MIXED "Ready to transmit a character or mixed mode document" VALTAB VAL_char_mode VAL 0 CM_NO_CHARACTER_MODE "Not possible/intended to perform the character mode" VAL 1 CM_CHARACTER_MODE "Possibility/intention to perform the character mode" VALTAB VAL_mixed_mode VAL 0 MM_NO_MIXED_MODE "Not possible/intended to perform the mixed mode" VAL 1 MM_MIXED_MODE "Possibility/intention to perform the mixed mode" VALTAB VAL_proc_mode_26 VAL 0 PM_NO_PROC_MODE_26 "Not possible/intended to perform the processable mode 26" VAL 1 PM_PROC_MODE_26 "Possibility/intention to perform the processable mode 26" VALTAB VAL_dig_network_cap VAL 0 DNC_NO_DIGITAL_NETWORK "Terminal is not on a digital network" VAL 1 DNC_DIGITAL_NETWORK "Terminal is on a digital network" VALTAB VAL_duplex VAL 0 DUP_HALF_DUPLEX "Operate in half duplex mode only" VAL 1 DUP_FULL_DUPLEX "Operate in full-duplex or half duplex mode" VALTAB VAL_jpeg VAL 0 JPG_NO_CODING "Not able/intent to code documents in JPEG" VAL 1 JPG_CODING "Able/intent to code documents in JPEG" VALTAB VAL_full_colour VAL 0 FC_NO_FULL_COLOR_MODE "Not able/intent to work in full colour mode" VAL 1 FC_FULL_COLOR_MODE "Able/intent to work in full colour mode" VALTAB VAL_r_12_bits_pel_comp VAL 0 BPP_8_BITS_PER_PEL "Images must/are digitised with 8 bits/pel" VAL 1 BPP_12_BITS_PER_PEL "Images may be/are digitised with up to 12 bits/pel" VALTAB VAL_no_subsamp VAL 0 NS_USE_4_1_1_SUB "Use the 4:1:1 sub-sampling ratio for the chrominance components in the image data" VAL 1 NS_NO_SUBSAMPLING "Use no sub-sampling ratio for the chrominance components in the image data" VALTAB VAL_cust_illum VAL 0 CI_USE_D50_ILLUM "Only the standard D50 illuminant for colour images supported/used" VAL 1 CI_CUSTOM_ILLUM "Standard D50 illuminant and other illuminants are supported/used for colour images" VALTAB VAL_cust_gamut VAL 0 CG_STD_GAMUT_RNG "Only the default gamut range for colour images supported/used" VAL 1 CG_CUST_GAMUT_RNG "Other gamut ranges are supported/used for colour images" VALTAB VAL_na_letter VAL 0 NLT_NO_NORTH_AMERICAN_LETTER "No North American Letter format is supported/used" VAL 1 NLT_NORTH_AMERICAN_LETTER "No North American Letter format is supported/used" VALTAB VAL_na_legal VAL 0 NLG_NO_NORTH_AMERICAN_LEGAL "No North American Legal format is supported/used" VAL 1 NLG_NORTH_AMERICAN_LEGAL "No North American Legal format is supported/used" VALTAB VAL_sing_prog_seq_coding_basic VAL 0 SPG_NO_SINGLE_PROG_BASIC "No single-progression sequential coding basic is supported/used" VAL 1 SPG_SINGLE_PROG_BASIC "Single-progression sequential coding basic is supported/used" VALTAB VAL_sing_prog_seq_coding_L0 VAL 0 SPG_NO_SINGLE_PROG_L0 "No single-progression sequential coding optional L0 is supported/used" VAL 1 SPG_SINGLE_PROG_L0 "Single-progression sequential coding optional L0 is supported/used" VALTAB VAL_frame_size VAL 0 FS_256_OCTETS "Frame size of 256 octets is used if ECM is active" VAL 1 FS_64_OCTETS "Frame size of 64 octets is used if ECM is active" VALTAB VAL_resolution_type VAL 0 RT_METRIC_BASED "Metric based resolution" VAL 1 RT_INCH_BASED "Inch based resolution" VALTAB VAL_huffman_tables VAL 0 HT_NO_HUFFMAN_TABLES "No default Huffman tables used" VAL 1 HT_HUFFMAN_TABLES "Default Huffman tables used" VAR fcf "Facsimile control field" 8 VAR cld_sub_nr "called subscriber number" 8 VAR clg_sub_nr "calling subscriber number" 8 VAR tra_sub_nr "transmitting subscriber number" 8 VAR pm_sub_addr "Polling mode sub-address" 8 VAR sub_addr "Sub-address" 8 VAR non_std_fac "Non-standard facility content" MAX_NSF_LEN VAR pm_pword "Password for polling" 8 VAR sm_pword "Password for sendingf" 8 VAR v8 "V.8" 1 VAL @m_t30 - VAL_v8@ VAR n_byte "no. of octets preferred" 1 VAL @m_t30 - VAL_n_byte@ VAR ready_tx_fax "Ready to transmit a facsimile document (polling)" 1 VAL @m_t30 - VAL_ready_tx_fax@ VAR rec_fax_op "Receiver fax operation" 1 VAL @m_t30 - VAL_rec_fax_op@ VAR data_sig_rate "data signalling rate" 4 VAL @m_t30 - VAL_data_sig_rate@ VAR R8_lines_pels "R8 x 7.7 lines/mm and/or 200 x 200 pels/25.4 mm" 1 VAL @m_t30 - VAL_R8_lines_pels@ VAR two_dim_coding "two dimensional coding" 1 VAL @m_t30 - VAL_two_dim_coding@ VAR rec_width "recording width" 2 VAL @m_t30 - VAL_rec_width@ VAR max_rec_len "maximum recording length" 2 VAL @m_t30 - VAL_max_rec_len@ VAR min_scan_time "minimum scan line time" 3 VAL @m_t30 - VAL_min_scan_time@ VAR uncomp_mode "uncompressed mode" 1 VAL @m_t30 - VAL_uncomp_mode@ VAR err_corr_mode "error correction mode" 1 VAL @m_t30 - VAL_err_corr_mode@ VAR t6_coding "T6 coding" 1 VAL @m_t30 - VAL_t6_coding@ VAR R8_lines "R8 lines" 1 VAL @m_t30 - VAL_R8_lines@ VAR r_300_pels "Res 300 x 300 pels/25.4 mm" 1 VAL @m_t30 - VAL_r_300_pels@ VAR R16_lines_pels "R16 x 15.4 lines/mm and/or 400 x 400 pels/24.4 mm" 1 VAL @m_t30 - VAL_R16_lines_pels@ VAR i_res_pref "Inch-based resolution preferred" 1 VAL @m_t30 - VAL_i_res_pref@ VAR m_res_pref "Metric-based resolution preferred" 1 VAL @m_t30 - VAL_m_res_pref@ VAR min_scan_time_hr "Minimum scan line time for higher resolutions" 1 VAL @m_t30 - VAL_min_scan_time_hr@ VAR sel_polling "Selective polling" 1 VAL @m_t30 - VAL_sel_polling@ VAR subaddr "Sub-addressing" 1 VAL @m_t30 - VAL_subaddr@ VAR password "Password flag" 1 VAL @m_t30 - VAL_password@ VAR ready_tx_doc "Ready to transmit a data file" 1 VAL @m_t30 - VAL_ready_tx_doc@ VAR bft "Binary file transfer" 1 VAL @m_t30 - VAL_bft@ VAR dtm "Document transfer mode" 1 VAL @m_t30 - VAL_dtm@ VAR edi "Electronic data interchange" 1 VAL @m_t30 - VAL_edi@ VAR btm "Basic transfer mode" 1 VAL @m_t30 - VAL_btm@ VAR ready_tx_mixed "Ready to transmit a character or mixed mode document" 1 VAL @m_t30 - VAL_ready_tx_mixed@ VAR char_mode "Character mode" 1 VAL @m_t30 - VAL_char_mode@ VAR mixed_mode "Mixed mode" 1 VAL @m_t30 - VAL_mixed_mode@ VAR proc_mode_26 "Processable mode" 1 VAL @m_t30 - VAL_proc_mode_26@ VAR dig_network_cap "Digital network capability" 1 VAL @m_t30 - VAL_dig_network_cap@ VAR duplex "Duplex and half duplex capabilities" 1 VAL @m_t30 - VAL_duplex@ VAR jpeg "JPEG coding" 1 VAL @m_t30 - VAL_jpeg@ VAR full_colour "Full color mode" 1 VAL @m_t30 - VAL_full_colour@ VAR r_12_bits_pel_comp "Digitise 12 Bits/pel component" 1 VAL @m_t30 - VAL_r_12_bits_pel_comp@ VAR no_subsamp "No sub-sampling" 1 VAL @m_t30 - VAL_no_subsamp@ VAR cust_illum "Custom illuminant" 1 VAL @m_t30 - VAL_cust_illum@ VAR cust_gamut "Custom gamut range" 1 VAL @m_t30 - VAL_cust_gamut@ VAR na_letter "North American Letter" 1 VAL @m_t30 - VAL_na_letter@ VAR na_legal "North American Legal" 1 VAL @m_t30 - VAL_na_legal@ VAR sing_prog_seq_coding_basic "Single-progression sequential Coding basic" 1 VAL @m_t30 - VAL_sing_prog_seq_coding_basic@ VAR sing_prog_seq_coding_L0 "Single-progression sequential Coding Optional L0" 1 VAL @m_t30 - VAL_sing_prog_seq_coding_L0@ VAR frame_size "Frame size" 1 VAL @m_t30 - VAL_frame_size@ VAR resolution_type "Resolution type selection" 1 VAL @m_t30 - VAL_resolution_type@ VAR huffman_tables "Preferred Huffman tables" 1 VAL @m_t30 - VAL_huffman_tables@ COMP cap0_rcv "Basic facsimile capabilities receiver" { .00000 ; reserved bits v8 ; V.8 n_byte ; no. of octets preferred .0 ; reserved bits ready_tx_fax ; ready to transmit a facsimile document (polling) rec_fax_op ; receiver fax operation data_sig_rate ; data signalling rate R8_lines_pels ; R8 x 7.7 lines/mm and/or 200 x 200 pels/25.4 mm two_dim_coding ; two-dimensional coding rec_width ; recording-width max_rec_len ; maximum recording length min_scan_time ; minimum scan line time } COMP cap1_rcv "Extended facsimile capabilities 1 receiver" { .0 ; reserved bit uncomp_mode ; uncompressed mode err_corr_mode ; error correction mode .000 ; reserved bits t6_coding ; T.6 coding } COMP cap2_rcv "Extended facsimile capabilities 2 receiver" { .0000000 ; reserved bits } COMP cap3_rcv "Extended facsimile capabilities 3 receiver" { R8_lines ; R8 x 15.4 lines/mm r_300_pels ; Res 300 x 300 pels/25.4 mm R16_lines_pels ; R16 x 15.4 lines/mm and/or 400 x 400 pels/25.4 mm i_res_pref ; inch-based resolution preferred m_res_pref ; metric-based resolution preferred min_scan_time_hr ; minimum scan line time for higher resolutions sel_polling ; selective polling } COMP cap4_rcv "Extended facsimile capabilities 4 receiver" { subaddr ; subaddressing password ; password flag ready_tx_doc ; ready to transmit a data file (polling) .0 ; reserved bit bft ; Binary File Transfer (BFT) dtm ; Document Transfer Mode (DTM) edi ; Electronic Data Interchange (EDI) } COMP cap5_rcv "Extended facsimile capabilities 5 receiver" { btm ; Basic Transfer Mode (BTM) .0 ; reserved bit ready_tx_mixed ; ready to transmit a character or mixed mode document (polling) char_mode ; character mode .0 ; reserved bit mixed_mode ; mixed mode (Annex E/T.4) .0 ; reserved bit } COMP cap6_rcv "Extended facsimile capabilities 6 receiver" { proc_mode_26 ; processable mode 26 dig_network_cap ; digital network capability duplex ; duplex and half duplex capabilities jpeg ; JPEG coding full_colour ; full colour mode .0 ; reserved bit r_12_bits_pel_comp ; Digitise 12 bits/pel component } COMP cap7_rcv "Extended facsimile capabilities 7 receiver" { no_subsamp ; no subsampling cust_illum ; custom illuminant cust_gamut ; custom gamut range na_letter ; North American Letter (215.9 x 279.4 mm) na_legal ; North American Legal (215.9 x 355.6 mm) sing_prog_seq_coding_basic ; single-progression sequential coding basic sing_prog_seq_coding_L0 ; single-progression sequential coding optional L0 } COMP cap0_snd "Basic facsimile capabilities sender" { .000000000 ; reserved bits rec_fax_op ; receiver fax operation data_sig_rate ; data signalling rate R8_lines_pels ; R8 x 7.7 lines/mm and/or 200 x 200 pels/25.4 mm two_dim_coding ; two-dimensional coding rec_width ; recording-width max_rec_len ; maximum recording length min_scan_time ; minimum scan line time } COMP cap1_snd "Extended facsimile capabilities 1 sender" { .0 ; reserved bit uncomp_mode ; uncompressed mode err_corr_mode ; error correction mode frame_size ; frame size .00 ; reserved bits t6_coding ; T.6 coding } COMP cap2_snd "Extended facsimile capabilities 2 sender" { .0000000 ; reserved bits } COMP cap3_snd "Extended facsimile capabilities 3 sender" { R8_lines ; R8 x 15.4 lines/mm r_300_pels ; Res 300 x 300 pels/25.4 mm R16_lines_pels ; R16 x 15.4 lines/mm and/or 400 x 400 pels/25.4 mm resolution_type ; resolution type selection .000 ; reserved bits } COMP cap4_snd "Extended facsimile capabilities 4 sender" { subaddr ; subaddressing password ; password flag .00 ; reserved bits bft ; Binary File Transfer (BFT) dtm ; Document Transfer Mode (DTM) edi ; Electronic Data Interchange (EDI) } COMP cap5_snd "Extended facsimile capabilities 5 sender" { btm ; Basic Transfer Mode (BTM) .00 ; reserved bit char_mode ; character mode .0 ; reserved bit mixed_mode ; mixed mode (Annex E/T.4) .0 ; reserved bit } COMP cap6_snd "Extended facsimile capabilities 6 sender" { proc_mode_26 ; processable mode 26 dig_network_cap ; digital network capability duplex ; duplex and half duplex capabilities jpeg ; JPEG coding full_colour ; full colour mode huffman_tables ; preferred Huffman tables r_12_bits_pel_comp ; Digitise 12 bits/pel component } COMP cap7_snd "Extended facsimile capabilities 7 sender" { no_subsamp ; no subsampling cust_illum ; custom illuminant cust_gamut ; custom gamut range na_letter ; North American Letter (215.9 x 279.4 mm) na_legal ; North American Legal (215.9 x 355.6 mm) sing_prog_seq_coding_basic ; single-progression sequential coding basic sing_prog_seq_coding_L0 ; single-progression sequential coding optional L0 } MSG BCS_DIS both 0b00000001 ; BCS Digital identification signal { fcf ; Facsimile control field cap0_rcv ; basic facsimile capabilities receiver ! cap1_rcv ; extended facsimile capabilities 1 receiver ! cap2_rcv ; extended facsimile capabilities 2 receiver ! cap3_rcv ; extended facsimile capabilities 3 receiver ! cap4_rcv ; extended facsimile capabilities 4 receiver ! cap5_rcv ; extended facsimile capabilities 5 receiver ! cap6_rcv ; extended facsimile capabilities 6 receiver # cap7_rcv ; extended facsimile capabilities 7 receiver } MSG BCS_CSI both 0b00000010 ; BCS Called subscriber identification { fcf ; Facsimile control field T30_IDENT cld_sub_nr [0..20] ; called subscriber number } MSG BCS_NSF both 0b00000100 ; BCS Non standard facilities { fcf ; Facsimile control field non_std_fac [.MAX_NSF_LEN] ; Non standard facilities } MSG BCS_DTC both 0b10000001 ; BCS Digital transmit command { fcf ; Facsimile control field cap0_rcv ; basic facsimile capabilities receiver ! cap1_rcv ; extended facsimile capabilities 1 receiver ! cap2_rcv ; extended facsimile capabilities 2 receiver ! cap3_rcv ; extended facsimile capabilities 3 receiver ! cap4_rcv ; extended facsimile capabilities 4 receiver ! cap5_rcv ; extended facsimile capabilities 5 receiver ! cap6_rcv ; extended facsimile capabilities 6 receiver # cap7_rcv ; extended facsimile capabilities 7 receiver } MSG BCS_CIG both 0b10000010 ; BCS Called subscriber identification { fcf ; Facsimile control field T30_IDENT clg_sub_nr [0..20] ; calling subscriber number } MSG BCS_NSC both 0b10000100 ; BCS Non standard facilities command { fcf ; Facsimile control field non_std_fac [.MAX_NSF_LEN] ; Non standard facilities } MSG BCS_PWD_POLL both 0b10000011 ; BCS password send { fcf ; Facsimile control field T30_IDENT pm_pword [0..20] ; Password for polling } MSG BCS_SEP both 0b10000101 ; BCS Selective polling { fcf ; Facsimile control field T30_IDENT pm_sub_addr [0..20] ; Sub address } MSG BCS_DCS both 0b01000001 ; BCS Digital command signal { fcf ; Facsimile control field cap0_snd ; basic facsimile capabilities sender ! cap1_snd ; extended facsimile capabilities 1 sender ! cap2_snd ; extended facsimile capabilities 2 sender ! cap3_snd ; extended facsimile capabilities 3 sender ! cap4_snd ; extended facsimile capabilities 4 sender ! cap5_snd ; extended facsimile capabilities 5 sender ! cap6_snd ; extended facsimile capabilities 6 sender # cap7_snd ; extended facsimile capabilities 7 sender } MSG BCS_TSI both 0b01000010 ; BCS Transmitting Subscriber Identification { fcf ; Facsimile control field T30_IDENT tra_sub_nr [0..20] ; transmitter subscriber number } MSG BCS_NSS both 0b01000100 ; BCS Non standard facilities set up { fcf ; Facsimile control field non_std_fac [.MAX_NSF_LEN] ; Non standard facilities } MSG BCS_SUB both 0b01000011 ; BCS Sub address { fcf ; Facsimile control field T30_IDENT sub_addr [0..20] ; Sub address } MSG BCS_PWD_SND both 0b01000101 ; BCS password receive { GSM3_V fcf ; Facsimile control field T30_IDENT sm_pword [0..20] ; Password for sending } MSG BCS_CFR both 0b00100001 ; BCS Confirmation to receive { fcf ; Facsimile control field } MSG BCS_FTT both 0b00100010 ; BCS Failure to train { fcf ; Facsimile control field } MSG BCS_EOM both 0b01110001 ; BCS End of message { fcf ; Facsimile control field } MSG BCS_MPS both 0b01110010 ; BCS Multiple page signal { fcf ; Facsimile control field } MSG BCS_EOP both 0b01110100 ; BCS End of procedure { fcf ; Facsimile control field } MSG BCS_PRI_EOM both 0b01111001 ; BCS Procedure interrupt EOM { GSM3_V fcf ; Facsimile control field } MSG BCS_PRI_MPS both 0b01111010 ; BCS Procedure interrupt MPS { fcf ; Facsimile control field } MSG BCS_PRI_EOP both 0b01111100 ; BCS Procedure interrupt EOP { fcf ; Facsimile control field } MSG BCS_MCF both 0b00110001 ; BCS Message confirmation { fcf ; Facsimile control field } MSG BCS_RTP both 0b00110011 ; BCS Retrain positive { fcf ; Facsimile control field } MSG BCS_RTN both 0b00110010 ; BCS Retrain negative { fcf ; Facsimile control field } MSG BCS_PIP both 0b00110101 ; BCS Procedure interrupt positive { fcf ; Facsimile control field } MSG BCS_PIN both 0b00110100 ; BCS Procedure interrupt negative { fcf ; Facsimile control field } MSG BCS_DCN both 0b01011111 ; BCS Disconnect { fcf ; Facsimile control field } MSG BCS_CRP both 0b01011000 ; BCS Command repeat { fcf ; Facsimile control field }