FreeCalypso > hg > fc-magnetite

view src/cs/drivers/drv_core/armio/armio.h @ 640:16eb1b9640dc

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
target gtm900 renamed to gtm900mgc2 This change reflects the fact that the build target in question supports MGC2GSMT hardware only, and will NOT work on other hw that confusing bears the same end user name of GTM900, neither the LoCosto-based GTM900-C nor the Calypso-based MG01GSMT that has a different and incompatible RFFE. If we ever get our hands on a piece of MG01GSMT hw and add support for it, that other target will be named gtm900mg01.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 31 Jan 2020 00:46:07 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/*
 * ARMIO.H  * * Control diagnostic bits * * Reference : GCS207 *
 */

#include "chipset.cfg"

#include "l1sw.cfg"

#if (OP_L1_STANDALONE == 0)
  #include "main/sys_types.h"
#else
  #include "sys_types.h"
#endif


// Duplicate address with ARMIO_IO_CNTL
// Need to investigate !!!
//#define ARMIO_CNTL      (MEM_ARMIO + 0x04) /* I/O control */

#define ARMIO_IN        (MEM_ARMIO + 0x00) /* inputs */
#define ARMIO_OUT       (MEM_ARMIO + 0x02) /* outputs */
#define ARMIO_IO_CNTL   (MEM_ARMIO + 0x04) /* I/O control */
#define ARMIO_CNTL_REG  (MEM_ARMIO + 0x06) /* control ARMIO */
#define ARMIO_LOAD_TIM  (MEM_ARMIO + 0x08) /* load TIM */
#if (CHIPSET != 12)
  #define ARMIO_KBR_IN    (MEM_ARMIO + 0x0A) /* KBR inputs (rows) */
  #define ARMIO_KBR_OUT   (MEM_ARMIO + 0x0C) /* KBR outputs (columns) */
#endif
#define ARMIO_PWM_CNTL  (MEM_ARMIO + 0x0E) /* LIGHT/BUZZER control */
#define ARMIO_LIGHT     (MEM_ARMIO + 0x10) /* light value */
#define ARMIO_BUZZER    (MEM_ARMIO + 0x12) /* buzzer value */
#define ARMIO_CLOCKEN   0x0020
#if (CHIPSET != 12)
  #define CLKM_IO_CNTL    MEM_IO_SEL         /* control IO */
#endif

#if (CHIPSET == 12)
  #define GPIO_INTERRUPT_LEVEL_REG  * (volatile SYS_UWORD16 *) (MEM_ARMIO + 0x16)
  #define GPIO_INTERRUPT_MASK_REG   * (volatile SYS_UWORD16 *) (MEM_ARMIO + 0x18)
#else
  #define ARMIO_GPIO_EVENT_MODE (MEM_ARMIO + 0x14) /* GPIO event mode */
  #define ARMIO_KBD_GPIO_INT    (MEM_ARMIO + 0x16) /* Kbd/GPIO IRQ register */
  #define ARMIO_KBD_GPIO_MASKIT (MEM_ARMIO + 0x18) /* Kbd/GPIO mask IRQ */
// CC test 0316  
  #define ARMIO_GPIO_DEBOUNCE   (MEM_ARMIO + 0x1A) /* GPIO debounceing register*/
// end  
#endif


#if (CHIPSET != 12)
  #define ARMIO_DCD (2) /* IO used for DCD on C-Sample - Output */
#endif
#define ARMIO_DTR (3) /* IO used for DTR on C-Sample - Input */

#define ARMIO_FALLING_EDGE (0)
#define ARMIO_RISING_EDGE  (1)

#if (CHIPSET != 12)
  #define ARMIO_KEYPDAD_INT (0x0001)
  #define ARMIO_GPIO_INT    (0x0002)

  #define ARMIO_MASKIT_KBD  (0x0001)
  #define ARMIO_MASKIT_GPIO (0x0002)

  void AI_EnableBit(int bit);
  void AI_DisableBit(int bit);
#endif
void AI_SetBit(int bit);
void AI_ResetBit(int bit);
void AI_ConfigBitAsOutput(int bit);
void AI_ConfigBitAsInput(int bit);
SYS_BOOL AI_ReadBit(int bit);
void AI_SetSimIO3V(SYS_UWORD8 StdOutput);

#if (OP_L1_STANDALONE == 0)
  void AI_Power(SYS_UWORD8 power);
#endif

void AI_ResetTspIO(void);
void AI_ResetDbgReg(void);
void AI_ResetIoConfig(void);
void AI_InitIOConfig(void);
void AI_ClockEnable (void);

void AI_SelectIOForIT (SYS_UWORD16 Pin, SYS_UWORD16 Edge);
#if (CHIPSET != 12)
  int  AI_CheckITSource (SYS_UWORD16 Source);
#endif
void AI_UnmaskIT (SYS_UWORD16 Source);
void AI_MaskIT (SYS_UWORD16 Source);