view src/cs/layer1/tpu_drivers/source/tpudrv.h @ 640:16eb1b9640dc

target gtm900 renamed to gtm900mgc2 This change reflects the fact that the build target in question supports MGC2GSMT hardware only, and will NOT work on other hw that confusing bears the same end user name of GTM900, neither the LoCosto-based GTM900-C nor the Calypso-based MG01GSMT that has a different and incompatible RFFE. If we ever get our hands on a piece of MG01GSMT hw and add support for it, that other target will be named gtm900mg01.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 31 Jan 2020 00:46:07 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 *
 *        Filename tpudrv.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

/*
 * Device addresses - GCS000
 */ 
// GSM 1.5 : TPU / TSP addresses 
//-------------------------------------

#if ((CHIPSET ==2) || (CHIPSET == 3) || (CHIPSET == 4))
  #define TPU_ADDR      0xFFFE0000l            // Hercule / Ulysse / Samson

  #define TPU_RAM       (TPU_ADDR + 0x1400)

  #define TPU_REG       (TPU_ADDR + 0x1000)
  #define TSP_REG       (TPU_ADDR + 0x0800)
  #define TPU_TIM       (TPU_ADDR + 0x2000)

#elif ((CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7)  || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
  #define TPU_ADDR      0xFFFF0000l            // Strobe 1 address

  #define TPU_RAM       0xFFFF9000l            // TPU RAM

  #define TPU_REG       (TPU_ADDR + 0x1000)    // TPU register
  #define TSP_REG       0xFFFE0800l            // TSP register
  #define TPU_TIM       0xFFFE2000l            // ULPD register

#endif


/*
 * Macros for defining TPU instructions
 */ 
#define TPU_SLEEP             0
#define TPU_MOVE(addr,data)   (0x8000 | ((data)<<5) | (addr))
#define TPU_AT(time)          (0x2000 | (((time + 5000) % 5000)))
#define TPU_FAT(time)         (0x2000 | (time))  // Fast version without modulo
#define TPU_SYNC(time)        (0x6000 | (time))
#define TPU_WAIT(time)        (0xA000 | (time))
#define TPU_OFFSET(time)      (0x4000 | (time))
#define MOD5000(a)            (((a) + 5000) % 5000)


/*
 * TSP registers - defined in GCS004 - Time Serial Port
 */ 
/*
 *  in TPU address space
 */
// GSM 1.5 : TSP_TX_REG_1/2/3/4 instead of TSP_TX_U/M/L
//           added TSP_SPI_SET1/2/3 to ctrl up to 5 periph. 
//-----------------------------------------------------
  #define TSP_CTRL1       0x00
  #define TSP_CTRL2       0x01
  #define TSP_TX_REG_1    0x04
  #define TSP_TX_REG_2    0x03
  #define TSP_TX_REG_3    0x02
  #define TSP_TX_REG_4    0x05
  #define TSP_ACT         0x06
  #define TSP_ACTX        0x07
  #define TSP_GAUGING_EN  0x11
  #define TSP_SPI_SET1    0x09
  #define TSP_SPI_SET2    0x0A 
  #define TSP_SPI_SET3    0x0B
  #define TPU_IT_DSP_PG   0x10
  #define TSP_GAUGING_EN  0x11

/*
 *  in ARM address space - defined in HYP004
 */
  #define TSP_RX_LSB   (TSP_REG + 0x00)

  #define TSP_RX_MSB   (TSP_REG + 0x02)

  #define TSP_TX_LSB   (TSP_REG + 0x0c)

  #define TSP_TX_MSB   (TSP_REG + 0x0a)


/*
 * TSP registers bit definitions
 */ 
  #define TC1_DEVICE0   0x00
  #define TC1_DEVICE1   0x20
  #define TC1_DEVICE2   0x40
  #define TC1_DEVICE3   0x60
  #define TC1_DEVICE4   0x80
  #define TC2_RD        0x01
  #define TC2_WR        0x02
  #define TC2_EDGE_TRIG 0x40
  #define TC2_RISING    0x80
  #define TSP_CLK_RISE  0x01
  #define TSP_ENA_POS   0x02
  #define TSP_ENA_EDGE  0x04
  #define GAUGING_START 0x01
  #define GAUGING_STOP  0x00
  #define TSP_ENA_POS_MSB 0x20



/*
 * TPU registers - defined in HYP002
 */ 
// GSM 1.5 : TPU reg are 16-bit access
//---------------------------------------
#define TPU_CTRL          (TPU_REG + 0x00)
#define TPU_INT_CTRL      (TPU_REG + 0x02)
#define TPU_INT_STAT      (TPU_REG + 0x04)
#define TPU_OFFSET_REG    (TPU_REG + 0x0C)
#define TPU_SYNCHRO_REG   (TPU_REG + 0x0E)
#define TPU_DSP_PG        (TPU_REG + 0x20)



 

/*
 * TPU control register bits
 */ 
// GSM 1.5 : TPU bits changed
//---------------------------------------
#define TPU_CTRL_RESET     0x0001 
#define TSP_CTRL_RESET     0x0080
#define TPU_CTRL_T_PAGE    0x0002
#define TPU_CTRL_T_ENBL    0x0004
#define TPU_CTRL_D_ENBL    0x0010       // WARNING THIS BIT DOES NOT EXIST IN HYPERION
#define TPU_CTRL_SPI_RST   0x0080
#define TPU_CTRL_WAIT      0x0200
#define TPU_CTRL_CLK_EN    0x0400
#if (CHIPSET == 7)  || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)
  #define TPU_CTRL_FULL_WRITE 0x0800
#endif




/* 
 * TPU interrupt control register bits
 */


/* WARNING BUG IN HYPERION. */
/* READING TPU_INT_CRTL, TPU_INT_ITP_M BIT CONTENTS AFFECTS THE TPU_INT_ITD_M VALUE. */ 

#define TPU_INT_ITF_M      0x0001
#define TPU_INT_ITP_M      0x0002         
#define TPU_INT_ITD_M      0x0004
#define TPU_INT_ITD_F      0x0008        // WARNING THIS BIT DOES NOT EXIST IN HYPERION

#define INT_FRAME   4       /* TPU frame interrupt */   
#define INT_PAGE    5       /* TPU page interrupt */        
#define INT_TSP 3       /* TSP interrupt */ 



#if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3))
    // BB signals connected to serial link1
    #define BULON    0x80     // bit6
    #define BULCAL   0x40     // bit5
    #define BULENA   0x20     // bit4
    #define BDLON    0x10     // bit3
    #define BDLCAL   0x08     // bit2
    #define BDLENA   0x04     // bit1
    #define STARTADC 0x02     // bit0
#endif


/* 
 * GSM RF programming times in quarter bits
 */
/**************************************************************************/
/**************************************************************************/
/****************************** W A R N I N G !!! *************************/
/******* This values are fine tuned for LAYER 1 . DO NOT MODIFY !!! *******/
/****** FOR ANY MODIFICATION , PLEASE CONTACT Texas Instruments Inc. ******/
/**************************************************************************/
/**************************************************************************/


/**************************************/
/* TPU Macros: prototypes functions   */
/**************************************/
// TPU macros.
//------------
void l1dmacro_reset_hw        (UWORD32 servingCellOffset);
void l1dmacro_init_hw         (void);
void l1dmacro_init_hw_light   (void);
void l1dmacro_idle            (void);                       
void l1dmacro_rx_synth        (SYS_UWORD16  radio_freq);
void l1dmacro_tx_synth        (SYS_UWORD16  radio_freq);
void l1dmacro_agc             (SYS_UWORD16  radio_freq, WORD8 gain, UWORD8 lna);
void l1dmacro_afc             (SYS_UWORD16 afc_value, UWORD8 win_id);
void l1dmacro_rx_ms           (SYS_UWORD16 radio_freq);
void l1dmacro_rx_fb           (SYS_UWORD16 radio_freq);
void l1dmacro_rx_fb26         (SYS_UWORD16 radio_freq);
void l1dmacro_offset          (UWORD32     offset_value, 
                               WORD32      relative_time);
void l1dmacro_synchro         (UWORD32 when, UWORD32 value);
void l1dmacro_rx_sb           (SYS_UWORD16 radio_freq);
void l1dmacro_rx_nb           (SYS_UWORD16 radio_freq);
void l1dmacro_tx_nb           (SYS_UWORD16 radio_freq, UWORD8 txpwr, UWORD8 adc_active);
void l1dmacro_tx_ra           (SYS_UWORD16 radio_freq, UWORD8 txpwr, UWORD8 adc_active);
void l1dmacro_adc_read_tx     (UWORD32 when);
void l1dmacro_adc_read_rx     (void);
void l1dmacro_set_frame_it    (void);

void l1pdmacro_it_dsp_gen(WORD16 time);

#if TESTMODE
  void l1dmacro_rx_cont (SYS_UWORD16 radio_freq, UWORD8 txpwr);
  void l1dmacro_tx_cont (SYS_UWORD16 radio_freq, UWORD8 txpwr);
  void l1dmacro_stop_cont (void);
#endif

/*
 * TPU prototypes
 */ 
void TP_PageIntHandler  (void);
void TP_FrameIntHandler (void);
void TP_PageIntHandler  (void);
void TP_FrameIntHandler (void);
void TPU_Reset(SYS_UWORD16 on);
void TSP_Reset(SYS_UWORD16 on);
void TPU_ClkEnable(SYS_UWORD16 on);
void TP_Reset(SYS_UWORD16 on);
void TP_Enable(SYS_UWORD16 on);
BOOL TPU_check_IT_DSP(void);


/*
 * TPUDRV global variables
 */ 
#ifdef TPUDRV_C
#define TP_GLOBAL 
#else
#define TP_GLOBAL extern
#endif

TP_GLOBAL volatile UWORD32 TP_PageInt;
TP_GLOBAL volatile UWORD32 TP_FrameInt;