view src/g23m-aci/aci/ati_dti.c @ 640:16eb1b9640dc

target gtm900 renamed to gtm900mgc2 This change reflects the fact that the build target in question supports MGC2GSMT hardware only, and will NOT work on other hw that confusing bears the same end user name of GTM900, neither the LoCosto-based GTM900-C nor the Calypso-based MG01GSMT that has a different and incompatible RFFE. If we ever get our hands on a piece of MG01GSMT hw and add support for it, that other target will be named gtm900mg01.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 31 Jan 2020 00:46:07 +0000
parents 53929b40109c
children
line wrap: on
line source

/*
+--------------------------------------------------------------------+
| PROJECT: GSM-F&D (8411)           $Workfile:: ati_dti.c           $|
| $Author:: Rm                      $Revision:: 187                 $|
| CREATED: 13.11.02                $Modtime::                       $|
| STATE  : code                                                      |
+--------------------------------------------------------------------+

   MODULE  : ATI 

   PURPOSE : AT Command to control data flow and devices in addition with DTI
             managment
*/

#ifdef DTI

#ifndef ATI_DTI_C
#define ATI_DTI_C

#include "aci_all.h"

#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_io.h"
#include "aci_cmd.h"
#include "dti.h"      /* functionality of the dti library */
#include "aci_lst.h"
#include "ati_int.h"
#include "aci_mem.h"
#include "cmh_dti.h"
#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"

#ifdef GPRS
#include "gaci_cmh.h"
#endif

#ifdef  FF_ATI_BAT

#include "typedefs.h"
#include "gdd.h"
#include "bat.h"

#include "ati_bat.h"

#endif /* FF_ATI_BAT */
/*==== EXPORT ==================================================*/
EXTERN CHAR  *cmdCmeError ( T_ACI_CMS_ERR e );
EXTERN CHAR  *parse(CHAR *b,CHAR *f, ...);

/*==== VARIABLE====================================================*/

const T_CAP_NAME ati_cap_name[] =
{
  {"CMD",         DEV_CPBLTY_CMD        },
  {"SER",         DEV_CPBLTY_SER        },
  {"PKT",         DEV_CPBLTY_PKT        },
  {"CMD,SER",     DEV_CPBLTY_CMD_SER    },
  {"CMD,PKT",     DEV_CPBLTY_CMD_PKT    },
  {"PKT,SER",     DEV_CPBLTY_PKT_SER    },
  {"CMD,PKT,SER", DEV_CPBLTY_CMD_PKT_SER},
  {"",            DEV_CPBLTY_NONE}
};

/*==== CONSTANT====================================================*/

#define DIO_DEVNO_MASK 0xFF

/*==============================================================*/



/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)                MODULE  :                  |
| STATE   : code                          ROUTINE :  map_dti_cpblty  |
+--------------------------------------------------------------------+

  PURPOSE : help function to map the capability values of 
            DTI_CPBLTY_xxx to enum value of T_CAP_ID.
            With the enum value we get the capability string in ati_cap_name[]
            For DTI_CPBLTY_xxx see SAP document AAA.doc chapter Capability
            Dor T_CAP_ID see cmh_dti.h
*/
GLOBAL T_CAP_ID map_dti_cpblty (UBYTE dti_cpblty)
{
  switch (dti_cpblty)
  {
    case (DTI_CPBLTY_NO):
      return (DEV_CPBLTY_NONE);

    case (DTI_CPBLTY_CMD):
      return (DEV_CPBLTY_CMD);

    case (DTI_CPBLTY_SER):
      return (DEV_CPBLTY_SER);

    case (DTI_CPBLTY_PKT):
      return (DEV_CPBLTY_PKT);

    case (DTI_CPBLTY_CMD + DTI_CPBLTY_SER):
      return (DEV_CPBLTY_CMD_SER);

    case (DTI_CPBLTY_CMD + DTI_CPBLTY_PKT):
      return (DEV_CPBLTY_CMD_PKT);

    case (DTI_CPBLTY_PKT + DTI_CPBLTY_SER):
      return (DEV_CPBLTY_PKT_SER);

    case (DTI_CPBLTY_CMD + DTI_CPBLTY_PKT + DTI_CPBLTY_SER):
      return (DEV_CPBLTY_CMD_PKT_SER);

    default:
    {
      TRACE_EVENT_P1("map_dti_cpblty():[ERR] unknown capability value = %d",dti_cpblty);
      return (DEV_CPBLTY_NONE);
    }
  }
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  :                    |
| STATE   : code                        ROUTINE :  setatPercentDATA  |
+--------------------------------------------------------------------+

  PURPOSE : set %DATA command ( control data flow )
            format: 
            %DATA=<mode>,<des_dev_name>,<des_dev_no>,[<sub_no>],<cap>[,<src_dev_name>,<src_dev_no>,[<sub_no>],[,<cid>]]
            example:
            %DATA=2,"RIV",1,,"PKT","SNDCP",1,,,
            means, set a permanent(2) redirection for "RIV" with packet capability to "SNDCP"
*/

GLOBAL T_ATI_RSLT setatPercentDATA ( char *cl, UBYTE srcId )

{
  CHAR          des_dev_name[MAX_SMS_ADDR_DIG];  /* destination device name       */
  CHAR          src_dev_name[MAX_SMS_ADDR_DIG];  /* source device name            */
  CHAR          dev_cap[MAX_SMS_ADDR_DIG];       /* device capability             */
  UBYTE         red_mode   = NOT_PRESENT_8BIT;   /* redirection mode              */
  UBYTE         pdp_cid    = NOT_PRESENT_8BIT;   /* context cid                   */
  U32           des_devId  = NOT_PRESENT_32BIT; /* destination device identifier  */
  SHORT         des_sub_no = ACI_NumParmNotPresent; /* destination sub number     */
  U32           src_devId  = NOT_PRESENT_32BIT; /* source device identifier       */
  SHORT         src_sub_no = ACI_NumParmNotPresent; /* source sub number          */
  T_ACI_RETURN  ret        = AT_FAIL;

  src_dev_name[0]='\0';
  des_dev_name[0]='\0';

  /* parse mode,des_dev_name, des_dev_no, cap, src_dev_name, src_dev_no, cid */
  cl = parse (cl, "xsyrssyrx", &red_mode,
                               (LONG)MAX_SMS_ADDR_DIG,
                               des_dev_name, &des_devId, &des_sub_no,
                               (LONG)MAX_SMS_ADDR_DIG,
                               dev_cap,
                               (LONG)MAX_SMS_ADDR_DIG,
                               src_dev_name, &src_devId, &src_sub_no,
                               &pdp_cid );
  if (!cl)
  {
      cmdCmeError (CME_ERR_Unknown);
      return (ATI_FAIL);
  }

  /*

   * if optional parameters have not been given, set to defaults
   */
  if (des_sub_no EQ ACI_NumParmNotPresent)
  {
    des_sub_no = 0;
  }
  if (src_sub_no EQ ACI_NumParmNotPresent)
  {
    src_sub_no = 0;
  }
  if (pdp_cid EQ NOT_PRESENT_8BIT)
  {
    pdp_cid = 0;
  }

#ifdef FF_ATI_BAT
  {
  T_BAT_cmd_send cmd;
  T_BAT_cmd_set_percent_data my_bat_set_percent_data;

  TRACE_FUNCTION("setatPercentDATA() calls bat_send() <=== as APPLICATION");

  memset(&my_bat_set_percent_data, 0, sizeof(my_bat_set_percent_data));
  cmd.ctrl_params = BAT_CMD_SET_PERCENT_DATA;
  cmd.params.ptr_set_percent_data = &my_bat_set_percent_data;

  my_bat_set_percent_data.mode = red_mode;   

  if (!strcmp(des_dev_name, "UART"))
    my_bat_set_percent_data.des_dev_name = BAT_DEV_NAME_UART;  
  else if (!strcmp(des_dev_name, "RIV"))
    my_bat_set_percent_data.des_dev_name = BAT_DEV_NAME_RIV;  
  else if (!strcmp(des_dev_name, "PKTIO"))
    my_bat_set_percent_data.des_dev_name = BAT_DEV_NAME_PKTIO;  
  else if (!strcmp(des_dev_name, "PSI"))
    my_bat_set_percent_data.des_dev_name = BAT_DEV_NAME_PSI;  
  
  my_bat_set_percent_data.des_devId = des_devId;    
  my_bat_set_percent_data.des_sub_no = des_sub_no;   
  
  if (!strcmp(dev_cap, "CMD"))
    my_bat_set_percent_data.capability = BAT_CAP_CMD;
  else if (!strcmp(dev_cap, "SER"))
    my_bat_set_percent_data.capability = BAT_CAP_SER;
  else if(!strcmp(dev_cap, "PKT"))
    my_bat_set_percent_data.capability = BAT_CAP_PKT;
  
  if (!strcmp(des_dev_name, "UART"))
    my_bat_set_percent_data.src_dev_name = BAT_DEV_NAME_UART;  
  else if (!strcmp(src_dev_name, "RIV"))
    my_bat_set_percent_data.src_dev_name = BAT_DEV_NAME_RIV;  
  else if (!strcmp(src_dev_name, "PKTIO"))
    my_bat_set_percent_data.src_dev_name = BAT_DEV_NAME_PKTIO;  
  else if (!strcmp(src_dev_name, "PSI"))
    my_bat_set_percent_data.src_dev_name = BAT_DEV_NAME_PSI;  

  my_bat_set_percent_data.src_devId = des_devId;   
  my_bat_set_percent_data.src_sub_no = src_sub_no;   
  my_bat_set_percent_data.cid = pdp_cid;           

  bat_send(ati_bat_get_client(srcId), &cmd);

  return ATI_EXCT; /* executing, because response is passed by callback function */
  }
#else /* OLD FUNCTION BODY */

  TRACE_FUNCTION( "setatPercentDATA()" );

  ret = sAT_PercentDATA ((T_ACI_CMD_SRC)srcId, red_mode,
                          des_dev_name,(UBYTE)(des_devId&DIO_DEVNO_MASK),(UBYTE)des_sub_no,
                          dev_cap,src_dev_name,(UBYTE)(src_devId&DIO_DEVNO_MASK),
                          (UBYTE)src_sub_no,pdp_cid);

  if (ret EQ AT_FAIL)
  {
    cmdCmeError (CME_ERR_Unknown);
    return (ATI_FAIL);
  }
  else
  {
    return (map_aci_2_ati_rslt(ret));
  }

#endif /* no FF_ATI_BAT*/
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)                MODULE  :                  |
| STATE   : code                          ROUTINE :  queatPercentDATA|
+--------------------------------------------------------------------+

  PURPOSE : query %DATA command ( control data flow )
*/

GLOBAL T_ATI_RSLT queatPercentDATA ( char *cl, UBYTE srcId )
{
  UBYTE         mode = (UBYTE)-1; /* mode is UBYTE type so typecasting -1 with UBYTE  */
  UBYTE         cid  = (UBYTE)-1;    /* cid is UBYTE type so typecasting -1 with UBYTE  */
  T_DINF_PARAM  des_param;      /* des_dev_name, des_dev_no, des_sub_no, des_cap */
  T_DINF_PARAM  src_param;      /* src_dev_name, src_dev_no, src_sub_no, pdp_cid */
  T_CAP_ID      capability = DEV_CPBLTY_NONE;

#ifdef GPRS
  char          *pktioName = "PKTIO";
#endif /* GPRS */
     
  TRACE_FUNCTION( "queatPercentDATA()" );

  des_param.dev_id     = NOT_PRESENT_8BIT; /* in case of there is no redirection at all */
  des_param.capability = 0xAA;             /* init with a value which makes never sense */
  /*
   * we want to get the pieces of information to all redirected devices
   */
  while ((qAT_PercentDATA ((T_ACI_CMD_SRC)srcId, &mode, &cid, &des_param, &src_param)) EQ AT_CMPL)
  {
    U32 des_devId = NOT_PRESENT_32BIT;
    U32 src_devId = NOT_PRESENT_32BIT;
    char *tmp_des_name = dti_entity_name[des_param.dev_id].name;
    char *tmp_src_name = dti_entity_name[src_param.dev_id].name;
    capability         = map_dti_cpblty (des_param.capability);
    /* With the device number, driver number and the dio id, form
       the device identifier of both the source and destination to 
       present to the terminal */

    des_devId = (((U32)des_param.dev_no )
                |((U32) (des_param.driver_id<<24))
                |((U32) (des_param.dio_ctrl_id <<8)));

    src_devId = (((U32)src_param.dev_no )
                 |((U32) (src_param.driver_id <<24))
                 |((U32) (src_param.dio_ctrl_id <<8)));


    /*
     * unfortunately in custom.h for PKTIO is defined "PKT" (Frame handles up to 4 chars only)
     * but for the device name we want to emit "PKTIO" to distinguish from capability "PKT"
     */
#ifdef GPRS
    if (des_param.dev_id EQ DTI_ENTITY_PKTIO)
    {
      tmp_des_name = pktioName;
    }

    if (src_param.dev_id EQ DTI_ENTITY_PKTIO)
    {
      tmp_src_name = pktioName;
    }
#endif
    sprintf (g_sa,"%s: %d,\"%s\",%x,%d,\"%s\",\"%s\",%x,%d,%d", "%DATA",
                                                                mode,
                                                                tmp_des_name, 
                                                                des_devId, 
                                                                des_param.sub_no, 
                                                                ati_cap_name[capability].name,
                                                                tmp_src_name, 
                                                                src_devId, 
                                                                src_param.sub_no, 
                                                                cid);

    io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT);
  }
  /*
   * when qAT_PercentDATA reached the end it returns with AT_FAIL, but check capability as sentinel
   */
  if (des_param.capability EQ DEV_CPBLTY_NONE)
  {
    /* 
     * DEV_CPBLTY_NONE is the sentinel, that there are no further devices 
     */
    return (ATI_CMPL);
  }
  else if (des_param.dev_id EQ NOT_PRESENT_8BIT)
  {
    /* 
     * NOT_PRESENT_8BIT, there is no redirection at all, but print default
     */
    sprintf (g_sa,"%s: 0,,0,0,,,0,0,0", "%DATA"); 
    io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT);
    return (ATI_CMPL);
  }

  cmdCmeError (CME_ERR_Unknown);
  return (ATI_FAIL);
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  :                     |
| STATE   : code                       ROUTINE :  setatPercentDINF   |
+--------------------------------------------------------------------+

  PURPOSE : show list of available data and ATI channels and capabilities
            %DINF=<mode>   mode: 0=current, 1=other
*/

GLOBAL T_ATI_RSLT setatPercentDINF( char *cl, UBYTE srcId )
{
  UBYTE               mode      = (UBYTE)-1;    /* mode is UBYTE type so typecasting -1 with UBYTE  */
  T_ACI_RETURN  ret          = AT_FAIL;
  T_CAP_ID      capability   = DEV_CPBLTY_NONE;
  T_CAP_ID      cur_cap      = DEV_CPBLTY_NONE;

#ifdef GPRS
  char          *pktioName   = "PKTIO";
#endif /* GPRS */
  U32 des_devId = NOT_PRESENT_32BIT;
  
  cl = parse (cl, "x", &mode);
  if (!cl)
  {
    cmdCmeError (CME_ERR_Unknown);
    return (ATI_FAIL);
  }

#ifdef FF_ATI_BAT
  {
  T_BAT_cmd_send cmd;
  T_BAT_cmd_set_percent_dinf my_bat_set_percent_dinf;

  TRACE_FUNCTION("setatPercentDINF() calls bat_send() <=== as APPLICATION");

  memset(&my_bat_set_percent_dinf, 0, sizeof(my_bat_set_percent_dinf));
  cmd.ctrl_params = BAT_CMD_SET_PERCENT_DINF;
  cmd.params.ptr_set_percent_dinf = &my_bat_set_percent_dinf;

  my_bat_set_percent_dinf.mode = mode;

  bat_send(ati_bat_get_client(srcId), &cmd);

  return ATI_EXCT; /* executing, because response is passed by callback function */
  }
#else /* OLD FUNCTION BODY */
  {
  T_DINF_PARAM  device_para;

  TRACE_FUNCTION( "setatPercentDINF()" );

  switch (mode)
  {
    case (SHOW_CURR_CHAN_INF):
    {
      /*
       * we want to get the piece of information, which belongs to the srcId
       */
      ret = sAT_PercentDINF ((T_ACI_CMD_SRC)srcId, mode, &device_para);

      if ((ret EQ AT_CMPL) AND (device_para.src_id EQ srcId))
      {
        char *tmp_des_name = dti_entity_name[device_para.dev_id].name;
        capability = map_dti_cpblty (device_para.capability);
        cur_cap    = map_dti_cpblty (device_para.cur_cap);
        /* With the device number, driver number and the dio id, form
           the device identifier of the destination and  
           present to the terminal */

        des_devId = (((U32)device_para.dev_no)
                     |((U32) (device_para.driver_id <<24))
                     |((U32) (device_para.dio_ctrl_id <<8)));


        /*
         * unfortunately in custom.h for PKTIO is defined "PKT" (Frame handles up to 4 chars only)
         * but for the device name we want to emit "PKTIO" to distinguish from capability "PKT"
         */
#ifdef GPRS
    if (device_para.dev_id EQ DTI_ENTITY_PKTIO)
    {
      tmp_des_name = pktioName;
    }
#endif

        sprintf (g_sa,"%s:\"%s\",%x,%d,\"%s\",\"%s\",%d", "%DINF",
                                                          tmp_des_name,
                                                          des_devId,
                                                          device_para.sub_no,
                                                          ati_cap_name[capability].name,
                                                          ati_cap_name[cur_cap].name,
                                                          mode); /* current channel */



        io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT);
        return (ATI_CMPL);
      }
      else
      {
        break; /* an error */
      }
    }
    case (SHOW_ALL_CHAN_INF):
    {
      device_para.capability = 0xAA; /* init with a value which makes never sense, but is valuable for debug */
      /*
       * we want to get the pieces of information to all devices
       */
      while ((ret = sAT_PercentDINF ((T_ACI_CMD_SRC)srcId, mode, &device_para)) EQ AT_CMPL)
      {
        char *tmp_des_name = dti_entity_name[device_para.dev_id].name;
        if (device_para.src_id EQ srcId)
        {
          mode = SHOW_CURR_CHAN_INF; /* this is the current channel, so temporarily set mode */
        }
        else
        {
          mode = SHOW_ALL_CHAN_INF; /* other channel */
        }

        capability = map_dti_cpblty (device_para.capability);
        cur_cap    = map_dti_cpblty (device_para.cur_cap);
        /* With the device number, driver number and the dio id, form
           the device identifier of the destination and  
           present to the terminal */

        des_devId = (((U32)device_para.dev_no)
                     |((U32) (device_para.driver_id <<24))
                     |((U32) (device_para.dio_ctrl_id <<8)));



        /*
         * unfortunately in custom.h for PKTIO is defined "PKT" (Frame handles up to 4 chars only)
         * but for the device name we want to emit "PKTIO" to distinguish from capability "PKT"
         */
#ifdef GPRS
    if (device_para.dev_id EQ DTI_ENTITY_PKTIO)
    {
      tmp_des_name = pktioName;
    }
#endif
        sprintf (g_sa,"%s:\"%s\",%x,%d,\"%s\",\"%s\",%d", "%DINF",
                                                          tmp_des_name,
                                                          des_devId, 
                                                          device_para.sub_no,
                                                          ati_cap_name[capability].name,
                                                          ati_cap_name[cur_cap].name,
                                                          mode);
        io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT);
        mode = SHOW_ALL_CHAN_INF; /* reset to show all channels */
      }
      /*
       * when sAT_PercentDINF reached the end it returns with AT_FAIL, but check capability as sentinel
       */
      if (device_para.capability EQ DEV_CPBLTY_NONE)
      {
        /* 
         * DEV_CPBLTY_NONE is the sentinel, that there are no further devices 
         */
        return (ATI_CMPL);
      }

      break; /* an error */
    }
    default:
    {
      break; /* an error */
    }
  }

  cmdCmeError (CME_ERR_Unknown);
  return (ATI_FAIL);
  }
#endif /* no FF_ATI_BAT*/
}

#endif /* ATI_DTI_C */
#endif /* DTI */