FreeCalypso > hg > fc-magnetite
view blobs/patches/main-fchw.patch @ 682:17b7b92e7dba
uartfax.c: fix for old Openmoko bug with Auto-CTS
Openmoko made the change of enabling hardware assisted CTS flow control
in the UART when RTS/CTS flow control is used - it is a change which we
have retained in FreeCalypso - but they forgot to turn this hw mode off
if RTS/CTS flow control is deselected at the application level. We
(FreeCalypso) are now fixing the latter defect ourselves.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 26 Jun 2020 02:53:02 +0000 |
parents | acb07ce22054 |
children |
line wrap: on
line source
# This patch applies to the Init_Target() function in the init.obj module in # main.lib; it is an example of how this code will need to be patched for # running on our own future FreeCalypso hardware if we choose to use the same # Spansion S71PL129NC0 flash+pSRAM MCP as used in the Pirelli DP-L10 and use # the same memory timings as set by Pirelli's firmware. [init.obj] # value goes into nCS0, nCS1 and nCS3 config registers .text 66 A4 # value goes into nCS2 config reg .text 6C A4 # nop out the write into 0x02700000 .text 128 C0 .text 129 46