FreeCalypso > hg > fc-magnetite
view src/g23m-fad/tcpip/rnet/rnet_rt/rnet_rt_api.h @ 682:17b7b92e7dba
uartfax.c: fix for old Openmoko bug with Auto-CTS
Openmoko made the change of enabling hardware assisted CTS flow control
in the UART when RTS/CTS flow control is used - it is a change which we
have retained in FreeCalypso - but they forgot to turn this hw mode off
if RTS/CTS flow control is deselected at the application level. We
(FreeCalypso) are now fixing the latter defect ourselves.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 26 Jun 2020 02:53:02 +0000 |
parents | 90eb61ecd093 |
children |
line wrap: on
line source
/** * @file rnet_rt_api.h * * API Definition for RNET_RT SWE. * * @author Jose Yp-Tcha (j-yp-tcha@ti.com) * @version 0.1 */ /* * $Id: rnet_rt_api.h,v 1.5 2002/10/30 15:23:34 rf Exp $ * $Name: ti_20021030 $ * * History: * * Date Author Modification * ------------------------------------------------------------------- * 3/19/2002 Jose Yp-Tcha (j-yp-tcha@ti.com) Create. * 4/3/2002 Regis Feneon ngip api * * (C) Copyright 2002 by TI, All Rights Reserved */ #include "rnet_cfg.h" #ifdef RNET_CFG_REAL_TRANSPORT #ifndef __RNET_RT_API_H_ #define __RNET_RT_API_H_ #include "rvm_gen.h" /* Generic RVM types and functions. */ #include "rnet_api.h" #ifdef __cplusplus extern "C" { #endif /** * @name RNET_RT Return type and return values. * * Currently they are the standard RV return types, but they may * be customized in the future. */ /*@{*/ #define RNET_RT_OK RV_OK #define RNET_RT_NOT_SUPPORTED RV_NOT_SUPPORTED #define RNET_RT_MEMORY_ERR RV_MEMORY_ERR #define RNET_RT_INTERNAL_ERR RV_INTERNAL_ERR /*@}*/ /** * @name API functions * * API functions declarations (bridge functions). */ /*@{*/ /** * Creates a new connection identifier (T_RNET_DESC). * * The connection ID is not active until it has either been bound * to a local address or connected to a remote address. * * @param proto Protocol that should be used [IN]. * @param desc Connection identifier created [OUT]. * @param return_path Return path that should be used to send * the messages like accept, connect, etc [IN]. * @return RNET_MEMORY_ERR No available memory to create the new connection id. * RNET_NOT_INITIALIZED NET subsystem not initialized (internal error). * RNET_INTERNAL_ERR Network subsystem failed. * or No more socket descriptors available. * RNET_NOT_READY Still processing a callback function. * RNET_NOT_SUPPORTED Specified protocol not supported. * RNET_OK Connection ID successfully created. */ T_RNET_RET rnet_rt_new ( T_RNET_IPPROTO proto, T_RNET_DESC ** desc, T_RV_RETURN_PATH return_path); /** * Binds the connection to a local IP address and port number. * * @param desc Connection identifier [IN]. * @param local_addr Local IP address * The IP address can be specified as RNET_IP_ADDR_ANY * in order to bind the connection to all local IP addresses [IN]. * @param local_port If the port is not specified, the allocation of a port * is done automatically by the system [IN]. * @return RNET_IN_USE Another connection bound to the same address/port. * RNET_NOT_INITIALIZED NET subsystem not initialized (internal error). * RNET_INTERNAL_ERR Network subsystem failed. * RNET_INVALID_PARAMETER Invalid connection ID. * or Specified address not a valid address * RNET_NOT_READY Still processing a callback function. * RNET_MEMORY_ERR Not enough buffers available, too many connections. * RNET_OK Connection successfully bound. */ T_RNET_RET rnet_rt_bind (T_RNET_DESC * desc, T_RNET_IP_ADDR local_addr, T_RNET_PORT local_port); /** * Commands a connection to start listening for incoming connections. * When an incoming connection is accepted, an RNET_ACCEPTED message is sent. * The connection ID will have to be bound to a local port * with the rnet_bind() function. * * Note that there is no accept function: After a call to listen, * the application can receive RNET_ACCEPTED messages. * * @param desc Connection identifier [IN]. * @return RNET_MEMORY_ERR No available memory for the listening connection. * RNET_NOT_INITIALIZED NET subsystem not initialized (internal error). * RNET_INTERNAL_ERR Network subsystem failed. * or No more socket descriptors available. * RNET_INVALID_PARAMETER Invalid connection ID. * or Connection not bound with bind. * or The ID does not support listening operation. * RNET_IN_USE Connection already connected. * RNET_NOT_READY Still processing a callback function. * RNET_OK Listening successfully started. */ T_RNET_RET rnet_rt_listen (T_RNET_DESC *desc); /** * Sets up the connection ID to connect to the remote host and sends the * initial SYN segment which opens the connection. * * For the connection-oriented client (TCP), it prepares a connection from the local * to the peer system. The connection oriented client does not need * to call rnet_bind() before rnet_connect(), since rnet_connect() would automatically * use the local address of the client and allocate dynamically a free local port. * * rnet_connect() returns immediately, does not wait for the connection to be properly setup. * The RNET_CONNECT_CFM message is sent when the connection is established. * If the connection could not be properly established, a RNET_ERROR_IND * message is sent. * * A connectionless client (UDP) would use rnet_connect() to locally specify * the remote server, but no connection is open. But the remote address * is then known and does not need to be specified again. * rnet_connect() takes as parameter a fully initialized address structure, * specifying server address and port. * * @param desc Connection identifier [IN]. * @param peer_addr Peer address [IN]. * @param peer_port Peer port [IN]. * @return RNET_MEMORY_ERR No buffer space available. * RNET_NOT_INITIALIZED NET subsystem not initialized (internal error). * RNET_INTERNAL_ERR Network subsystem failed. * or Attempt to connect forcefully rejected. * or Attempt to connect datagram socket to broadcast address * RNET_INVALID_PARAMETER Invalid connection ID. * or Remote address not a valid address (such as ADDR_ANY). * RNET_NOT_SUPPORTED Addresses in the specified family cannot be used with this socket. * RNET_IN_USE Already connected (connection-oriented only). * RNET_NET_UNREACHABLE The network cannot be reached from this host at this time. * RNET_TIMEOUT Attempt to connect timed out without establishing a connection. * RNET_NOT_READY Still processing a callback function. * RNET_OK Connection in progress * RNET_CONNECT_CFM will be sent when the connection * has been successfully completed. */ T_RNET_RET rnet_rt_connect (T_RNET_DESC * desc, T_RNET_IP_ADDR peer_addr, T_RNET_PORT peer_port); /** * Enqueues the data for sending. * * Data is sent by enqueueing the data with a call to rnet_send(). * The function is not-blocking. * * Returns RNET_PARTIAL_SENT if not all data could be sent and the function * needs to be called again later to send the rest of the data. In that case, * the out value of len_p is the number of bytes effectively sent. * The remaining data can be sent when the message RNET_SEND_RDY is received. * * The buffer is copied by RNET, so the application can free the data buffer * when the function returns. * * @param desc Connection identifier [IN]. * @param buff Pointer on the data to send [IN]. * @param len_p Pointer on the length of the data to send [IN]. * Pointer on the length of the data effectively sent [OUT]. * @return RNET_MEMORY_ERR Not enough memory is available * RNET_NOT_INITIALIZED NET subsystem not initialized (internal error). * RNET_INTERNAL_ERR Network subsystem failed. * or Requested address is a broadcast address. * RNET_INVALID_PARAMETER The connection ID is invalid. * or The ID is not connected. * or Invalid buff parameter. * or Connection not bound with bind. * RNET_CONN_ABORTED Connection broken due to the "keep-alive" activity * detecting a failure while the operation was in progress. * or Virtual circuit terminated due to a time-out or other failure. * RNET_MSG_SIZE Message oriented connection (UDP), and the message * is larger than the maximum supported by the underlying transport. * RNET_NET_UNREACHABLE Remote host cannot be reached from this host at this time. * RNET_CONN_RESET The virtual circuit was reset by the remote side executing a "hard" * or "abortive" close. * RNET_TIMEOUT The connection has been dropped, because of a * network failure or because the system on the other end went down * without notice. * RNET_NOT_READY Still processing a callback function. * RNET_OK Sending in progress */ T_RNET_RET rnet_rt_send (T_RNET_DESC * desc, T_RVF_BUFFER * buff, UINT16 * len_p); /** * Read the waiting data (not-blocking). * * Data reception is message based: When the application receives a * T_RNET_RECV_IND message, it can read the data with this * rnet_recv() function. * * The data are copied in the buffer given by the application to RNET * via this rnet_recv function. * * Datagram oriented (UDP) * ----------------------- * When an UDP datagram arrives, the receiver application receives * a T_RNET_RECV_IND message. The application can then read the * datagram with the rnet_recv function. The buffer passed to the * function should be big enough to contain a UDP datagram, otherwise * the message is not put in the buffer and the error code * RNET_MSG_SIZE is returned. * * The OUT value of the len_p parameter can have two possible values: * - If there was data to read and no error detected (function * returned RNET_OK), len_p contains the size of the received datagram. * - If there was no error, but no data to read, len_p contains 0. * * RNET will only send a new T_RNET_RECV_IND with a specific descriptor * when a rnet_recv function has been called that returned a len_p parameter * with a 0 value. Therefore, the application should loop on rnet_recv when * it receives a T_RNET_RECV_IND message, like: * UINT16 *len_p = -1; * while (*len_p != 0) { * ret = rnet_recv(desc, buff, len_p); * ... * } * * Stream oriented (TCP) * --------------------- * When a new stream of data arrives on a connection, the receiver * application receives a T_RNET_RECV_IND. It can then read the flow * with the rnet_recv function, until the len_p parameter is returned * with a 0 value. * * The stack will only send a new T_RNET_RECV_IND message when * rnet_recv has been called and has returned the len_p parameter with a 0. * * * @param desc Connection identifier [IN]. * @param buff Buffer to store the received data [OUT]. * @param len_p Pointer on the length of the passed buffer [IN] * Pointer on the size of the received data in the buffer [OUT]. * @return RNET_MEMORY_ERR Not enough memory is available * RNET_NOT_INITIALIZED NET subsystem not initialized (internal error). * RNET_INTERNAL_ERR Network subsystem failed. * RNET_NOT_READY Still processing a callback function. * RNET_INVALID_PARAMETER The connection ID is invalid. * or The ID is not connected. * or Invalid buff parameter. * or Connection not bound with bind. * RNET_CONN_ABORTED Connection broken due to the "keep-alive" activity * detecting a failure while the operation was in progress. * or Virtual circuit terminated due to a time-out or other failure. * RNET_MSG_SIZE The socket is message oriented (UDP), and the message * was too large to fit into the specified buffer and was truncated. * RNET_CONN_RESET The virtual circuit was reset by the remote side executing a "hard" * or "abortive" close. * RNET_TIMEOUT The connection has been dropped, because of a * network failure or because the system on the other end went down * without notice. * RNET_NET_UNREACHABLE Remote host cannot be reached from this host at this time. * RNET_OK Data successfully read. */ T_RNET_RET rnet_rt_recv (T_RNET_DESC * desc, T_RVF_BUFFER *buff, UINT16 * len_p); T_RNET_RET rnet_rt_recv_from (T_RNET_DESC * desc, T_RVF_BUFFER * buff, UINT16 * len_p, T_RNET_IP_ADDR * from_addr, T_RNET_PORT * from_port); /** * Disables the sending on a socket and informs the peer * about it. * * Subsequent calls to the send function are disallowed. * For TCP sockets, a FIN will be sent after all data is sent and acknowledged by the receiver. * The rnet_shutdown function does not frees the connection ID. Any resources attached * to the ID will not be freed until rnet_close is invoked. * * To assure that all data is sent and received on a connection (TCP) before it * is closed, an application should use rnet_shutdown to close connection before calling * rnet_close. For example, to initiate a graceful disconnect: * 1) Call rnet_shutdown. * 2) When RNET_ERROR_IND with RNET_CONN_CLOSED is received, call rnet_recv until * the len parameter is zero. * 3) Call rnet_close. * * Following technique describes how to minimize the chance of problems * occurring during connection teardown. In this example, the client is responsible for * initiating a graceful shutdown. * * Client Side Server Side * (1) Invoke rnet_shutdown to * signal end of session and that * client has no more data to send. * (2) Receive RNET_ERROR_IND with RNET_CONN_CLOSED, * indicating graceful shutdown in progress * and that all data has been received. * (3) Send any remaining response data with rnet_send. * (5') Get RNET_RECV_IND and (4) Invoke rnet_shutdown to * invoke rnet_recv to get any indicate server has no more data to send. * response data sent by server. * (5) Receive RNET_ERROR_IND (4') Invoke rnet_close. * with RNET_CONN_CLOSED. * (6) Invoke rnet_close. * * The timing sequence is maintained from step (1) to step (6) between the client and * the server, except for step (4') and (5') which only has local timing significance in * the sense that step (5) follows step (5') on the client side while step (4') follows * step (4) on the server side, with no timing relationship with the remote party. * * @param desc Connection identifier. * @return RNET_NOT_INITIALIZED NET subsystem not initialized (internal error). * RNET_INTERNAL_ERR Network subsystem failed. * RNET_INVALID_PARAMETER The connection ID is invalid. * The descriptor is not connected (TCP only). * RNET_NOT_READY Still processing a callback function. * RNET_OK Connection shutdown, sending impossible * RNET_ERROR_IND with the parameter RNET_CONN_CLOSED * will be sent to the peer. */ T_RNET_RET rnet_rt_shutdown (T_RNET_DESC * desc); /** * Closes the connection. * * Use it to release the connection ID so further references to it will fail with * the error RNET_INVALID_PARAMETER. * * An application should always have a matching call to rnet_close for each successful * call to rnet_new to return any resources to the system. * * The function may return RNET_MEMORY_ERR if no memory * was available for closing the connection. If so, the application * should wait and try again either by using the error message * or the polling functionality. * If the close succeeds, the function returns RNET_OK. * * The connection ID is deallocated after a call to rnet_close(). * * @param desc Connection identifier. * @return RNET_MEMORY_ERR Not enough memory is available * RNET_NOT_INITIALIZED NET subsystem not initialized (internal error). * RNET_INTERNAL_ERR Network subsystem failed. * RNET_INVALID_PARAMETER The connection ID is invalid. * RNET_NOT_READY Still processing a callback function. * RNET_OK Socket closed. */ T_RNET_RET rnet_rt_close (T_RNET_DESC * desc); /** * Gets the local address and port of a connection ID. * * @param desc Connection identifier [IN]. * @param local_addr_p Local IP address [OUT]. * @param local_port_p Local port [OUT]. * @return RNET_NOT_INITIALIZED NET subsystem not initialized (internal error). * RNET_INTERNAL_ERR Network subsystem failed. * RNET_INVALID_PARAMETER The connection ID is invalid. * or Not bound to an address with bind. * or ADDR_ANY is specified in bind but connection not yet occurred. * RNET_NOT_READY Still processing a callback function. * RNET_OK Local address/port successfully get. */ T_RNET_RET rnet_rt_get_local_addr_port (T_RNET_DESC * desc, T_RNET_IP_ADDR * local_addr_p, T_RNET_PORT * local_port_p); /** * Use to determine the amount of data pending in the network's input buffer * that can be read from the connection ID. * * If desc is stream oriented (TCP), returns the amount of data that can be read * in a single call to the rnet_recv function; this might not be the same as the * total amount of data queued on the socket. * If desc is message oriented (UDP), returns the size of the first datagram * (message) queued on the socket. * * @param desc Connection identifier [IN]. * @param size_p Pointer to an unsigned int in which the result is stored [OUT]. * @return RNET_NOT_INITIALIZED NET subsystem not initialized (internal error). * RNET_INTERNAL_ERR Network subsystem failed. * RNET_INVALID_PARAMETER The connection ID is invalid. * RNET_NOT_READY Still processing a callback function. * RNET_OK Value successfully get. */ T_RNET_RET rnet_rt_get_buff_size (T_RNET_DESC * desc, UINT32 * size_p); /** * Requests host information corresponding to a host name or to a * network address. * * One of the two parameters name or addr must be NULL. * * This function is bridge function sending a corresponding message to RNET. * The message RNET_HOST_INFO is sent back when the requested information * is available. * * Note that this function does not need a connection identifier and specifies * its own return path. * * @param name Name of the host to resolve [IN]. * @param addr Network address [IN]. * @param return_path Return path for sending the response. * @param user_data Pointer on some user-defined data that * will be contained in the RNET_HOST_INFO message [IN]. * @return RNET_MEMORY_ERR Not enough memory is available. * RNET_OK The message could be correctly send. */ T_RNET_RET rnet_rt_get_host_info (char *name, T_RNET_IP_ADDR addr, T_RV_RETURN_PATH return_path, void * user_data); /* * Following functions are not directly part of the networking API, * but they are used to retrieve some simple information from a connection * descriptor. They are simple blocking functions, not sending any messages. */ /** * Retrieves the protocol associated to a connection descriptor. * * @param desc Connection identifier. * @return A value of the T_RNET_IPPROTO enumeration. */ T_RNET_IPPROTO rnet_rt_get_proto (T_RNET_DESC *desc); /** * Associates an application specific pointer to a connection ID. * * @param desc Connection identifier. * @param user_data Pointer that can be used by an application to store * application specific data. */ void rnet_rt_set_user_data (T_RNET_DESC *desc, void *user_data); /** * Returns the application specific pointer associated to the connection ID. * * @param desc Connection identifier. * @return Application specific data. */ void * rnet_rt_get_user_data (T_RNET_DESC *desc); /*@}*/ /** * Gets the maximum send size of a message. * * @param desc Connection identifier [IN]. * @param size_p Maximum send size [OUT]. * @return RNET_NOT_INITIALIZED NET subsystem not initialized (internal error). * RNET_INTERNAL_ERR Network subsystem failed. * RNET_INVALID_PARAMETER The connection ID is invalid. * RNET_NOT_READY Still processing a callback function. * RNET_OK Local address/port successfully get. */ T_RNET_RET rnet_rt_get_max_packet_size (T_RNET_DESC *desc, UINT32 *size_p); /** * NexGenIP specific API */ T_RNET_RET rnet_rt_route_add( T_RNET_IP_ADDR dest, T_RNET_IP_ADDR netmask, T_RNET_IP_ADDR gateway); T_RNET_RET rnet_rt_route_del( T_RNET_IP_ADDR dest); T_RNET_RET rnet_rt_route_default( T_RNET_IP_ADDR gateway); T_RNET_RET rnet_rt_if_setaddr( const char *ifname, T_RNET_IP_ADDR addr, T_RNET_IP_ADDR netmask); T_RNET_RET rnet_rt_if_getaddr( const char *ifname, T_RNET_IP_ADDR *addr, T_RNET_IP_ADDR *netmask); T_RNET_RET rnet_rt_if_setdstaddr( const char *ifname, T_RNET_IP_ADDR dstaddr); T_RNET_RET rnet_rt_if_getdstaddr( const char *ifname, T_RNET_IP_ADDR *dstaddr); T_RNET_RET rnet_rt_set_resolver( const char *domain, T_RNET_IP_ADDR dns1, T_RNET_IP_ADDR dns2); #ifdef __cplusplus } #endif #endif /*__RNET_RT_API_H_*/ #endif /* ifdef RNET_CFG_REAL_TRANSPORT */