FreeCalypso > hg > fc-magnetite
view src/cs/services/atp/atp_uart.c @ 665:2795a11973b8
UART PS entity: added trace of line state changes
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Wed, 27 May 2020 22:46:55 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/********************************************************************************/ /* */ /* File Name: atp_uart.c */ /* */ /* Purpose: This file contains the internal functions related to */ /* the ATP-UART interface and used to utilize a COM port */ /* under WIN32. */ /* */ /* Note: None. */ /* */ /* Revision History: */ /* 10/04/01 Pascal Pompei */ /* - Create. */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved. */ /* */ /********************************************************************************/ #include "atp/atp_uart_i.h" /********************************************************************************/ /* */ /* Function Name: atp_uart_create_com_port */ /* */ /* Purpose: This function creates a COM port. */ /* */ /* Input Parameters: */ /* com_port - Contains the COM port number. */ /* baud_rate - Contains the baud rate (in bits per second). */ /* */ /* Output Parameters: None. */ /* */ /* Global Parameters: None. */ /* */ /* Note: None. */ /* */ /* Revision History: */ /* 02/05/01 David Lamy-Charrier */ /* - Create. */ /* */ /********************************************************************************/ T_ATP_UART_ERROR_CODES atp_uart_create_com_port (T_ATP_UART_COM_PORT com_port, T_ATP_UART_BAUD_RATE baud_rate) { /* Declare local variables. */ DCB control_settings; COMMTIMEOUTS timeouts = {MAXDWORD, \ MAXDWORD, \ 0x0000000A, \ 0x00000000, \ 0x00000000}; /******************* atp_uart_create_com_port function begins *******************/ /* First, update the name associated with the COM port. */ (gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_name[3] = (char) ('0' + com_port); /* Then, create the COM port with the following parameters: */ /* - Read/Write access, */ /* - The COM port can not be shared and can not be opened again until the */ /* handle is closed, */ /* - The handle can not be inherited, */ /* - The COM port is just opened (failed if does not exist), */ /* - No specific file attributes, */ /* - No template used. */ (gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_handle = CreateFile ((gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_name, (GENERIC_READ | GENERIC_WRITE), 0x00000000, NULL, OPEN_EXISTING, 0x00000000, NULL); /* If any error occurred, then abort. */ if ((gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_handle == INVALID_HANDLE_VALUE) { return (RV_INVALID_PARAMETER); } /* Otherwise, having created the COM port, get the default setting */ /* information. However, if any error occurred, then remove the COM port */ /* and abort. */ control_settings.DCBlength = sizeof (DCB); if (GetCommState ((gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_handle, \ &control_settings) == FALSE) { (void) atp_uart_remove_com_port (); return (RV_INVALID_PARAMETER); } /* Define the baud rate, as well as the DCB structure settings. */ control_settings.BaudRate = baud_rate; control_settings.fOutxCtsFlow = TRUE; control_settings.fOutxDsrFlow = FALSE; control_settings.fDtrControl = DTR_CONTROL_ENABLE; control_settings.fDsrSensitivity = FALSE; control_settings.fRtsControl = RTS_CONTROL_HANDSHAKE; /* Then, configure the COM port according to the specifications of the DCB */ /* structure, set the timeout parameters for all read and write operations */ /* on the COM port and discard all characters from the output and input */ /* buffers. However, if any error occurred, then remove the COM port and */ /* abort. */ if ((SetCommState ((gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_handle, \ &control_settings) == FALSE) || \ (SetCommTimeouts ((gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_handle, \ &timeouts) == FALSE) || \ (PurgeComm ((gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_handle, \ (PURGE_RXCLEAR | PURGE_TXCLEAR | PURGE_RXABORT | PURGE_TXABORT)) == FALSE)) { (void) atp_uart_remove_com_port (); return (RV_INTERNAL_ERR); } return (RV_OK); } /****************** End of atp_uart_create_com_port function ******************/ /********************************************************************************/ /* */ /* Function Name: atp_uart_write_com_port */ /* */ /* Purpose: This function writes data on the COM port. */ /* */ /* Input Parameters: */ /* data_buffer_p - Pointer on the data to be written. */ /* data_size - Contains the total byte count to be written. */ /* */ /* Output Parameters: None. */ /* */ /* Global Parameters: None. */ /* */ /* Note: Buffer de-allocation is outside the scope of this */ /* function. */ /* */ /* Revision History: */ /* 02/05/01 David Lamy-Charrier */ /* - Create. */ /* */ /********************************************************************************/ T_ATP_UART_ERROR_CODES atp_uart_write_com_port (UINT8 *data_buffer_p, UINT32 data_size) { /* Declare a local variable. */ UINT32 data_size_sent = 0x00000000; /******************** atp_uart_write_com_port function begins *******************/ /* Attempt writing data. If any error occurred, then abort. */ if (((gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_handle == INVALID_HANDLE_VALUE) || \ (WriteFile ((gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_handle, \ data_buffer_p, \ data_size, \ (unsigned long *) (&data_size_sent), \ NULL) == FALSE) || \ (data_size_sent != data_size)) { return (RV_INVALID_PARAMETER); } return (RV_OK); } /******************* End of atp_uart_write_com_port function ******************/ /********************************************************************************/ /* */ /* Function Name: atp_uart_read_com_port */ /* */ /* Purpose: This function reads data from the COM port. */ /* */ /* Input Parameters: */ /* data_buffer_p - Pointer on the destination buffer. */ /* data_size_p - Pointer on the total byte count to be read. */ /* */ /* Output Parameters: None. */ /* data_size_p - Contains the total byte count read. */ /* */ /* Global Parameters: None. */ /* */ /* Notes: Buffer allocation is outside the scope of this */ /* function Moreover, this function returns the total */ /* byte count read, up to the expected value (from */ /* 0x00000000 to 'data_size_p'). */ /* */ /* Revision History: */ /* 02/05/01 David Lamy-Charrier */ /* - Create. */ /* */ /********************************************************************************/ T_ATP_UART_ERROR_CODES atp_uart_read_com_port (UINT8 *data_buffer_p, UINT32 *data_size_p) { /* Declare a local variable. */ UINT32 data_size_read = 0x00000000; UINT32 total_data_size_read = 0x00000000; /******************** atp_uart_read_com_port function begins ********************/ /* First, check whether the COM port is in use and whether the total byte */ /* count to be read is valid. Otherwise, abort. */ if (((gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_handle == INVALID_HANDLE_VALUE) || \ (data_size_p == NULL)) { return (RV_INVALID_PARAMETER); } /* Then, attempt reading data, up to the expected value. However, abort if */ /* no data available from the COM port or if any error occurred. */ do { if (ReadFile ((gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_handle, \ (data_buffer_p + total_data_size_read), \ (*data_size_p - total_data_size_read), \ (unsigned long *) (&data_size_read), \ NULL) == FALSE) { return (RV_INVALID_PARAMETER); } total_data_size_read += data_size_read; } while (data_size_read != 0x00000000); /* Update the total byte count read. */ *data_size_p = total_data_size_read; return(RV_OK); } /******************* End of atp_uart_read_com_port function *******************/ /********************************************************************************/ /* */ /* Function Name: atp_uart_remove_com_port */ /* */ /* Purpose: This function removes the COM port. */ /* */ /* Input Parameters: None. */ /* */ /* Output Parameters: None. */ /* */ /* Global Parameters: None. */ /* */ /* Note: None. */ /* */ /* Revision History: */ /* 02/05/01 David Lamy-Charrier */ /* - Create. */ /* */ /********************************************************************************/ T_ATP_UART_ERROR_CODES atp_uart_remove_com_port (void) { /******************* atp_uart_remove_com_port function begins *******************/ /* Remove the COM port. If any error occurred, then abort. */ if (((gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_handle == INVALID_HANDLE_VALUE) || \ (DeleteFile ((gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_name) == FALSE)) { return (RV_INVALID_PARAMETER); } /* Set the default handle assigned to the COM port. */ (gbl_atp_uart_ctrl_blk_p->conn_ctrl_blk).com_port_handle = INVALID_HANDLE_VALUE; return (RV_OK); } /****************** End of atp_uart_remove_com_port function ******************/