FreeCalypso > hg > fc-magnetite
view src/g23m-gsm/sim/sim_em.h @ 665:2795a11973b8
UART PS entity: added trace of line state changes
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Wed, 27 May 2020 22:46:55 +0000 |
parents | 27a4235405c6 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Engineering Mode (EM) Declarations + Macros | +----------------------------------------------------------------------------- */ #ifndef SIM_EM_H #define SIM_EM_H #ifdef FF_EM_MODE /* ------------ data declarations for EM ---------------- */ /* * Ring buffer is by one bigger than max. number of prims, because it * needs always one termination entry. * To optimize the buffersize, the data is packed in the buffer as follows: * type, length, value * Value is the combination of the additional parameters as defined in 8443.601, coded as UBYTE. */ #define EM_SIM_BUFFER_SIZE 67 /* * EM_MAX_SIM_EVENTS defines maximum number of event traces for the engineering mode. * The number is increased by one to ensure that the event numbers defined in the * corresponding document are the same as in the sources. */ #define EM_MAX_SIM_EVENTS 26 /* * The offset is used to indicate the source entity the event trace is from. * L1/ALR = 0x00, DL = 0x2D, RR = 0x37, MM = 0x5F, CC = 0x78, SS = 0xAF, SMS = 0xBE, SIM = E1 */ #define SIM_OFFSET 0xE1 /* * Type is combination of entity index(upper nibble) plus event number(lower nibble). * Bit 8 7 6 5 4 3 2 1 * | entity | event number | */ #define SIM_V_1 (1 + SIM_OFFSET) #define SIM_V_2 (2 + SIM_OFFSET) #define SIM_V_3 (3 + SIM_OFFSET) #define SIM_V_4 (4 + SIM_OFFSET) #define SIM_V_5 (5 + SIM_OFFSET) #define SIM_V_6 (6 + SIM_OFFSET) #define SIM_V_7 (7 + SIM_OFFSET) #define SIM_V_8 (8 + SIM_OFFSET) #define SIM_V_9 (9 + SIM_OFFSET) #define SIM_V_10 (10+ SIM_OFFSET) #define SIM_V_11 (11+ SIM_OFFSET) #define SIM_V_12 (12+ SIM_OFFSET) #define SIM_V_13 (13+ SIM_OFFSET) #define SIM_V_14 (14+ SIM_OFFSET) #define SIM_V_15 (15+ SIM_OFFSET) #define SIM_V_16 (16+ SIM_OFFSET) #define SIM_V_17 (17+ SIM_OFFSET) #define SIM_V_18 (18+ SIM_OFFSET) #define SIM_V_19 (19+ SIM_OFFSET) #define SIM_V_20 (20+ SIM_OFFSET) #define SIM_V_21 (21+ SIM_OFFSET) #define SIM_V_22 (22+ SIM_OFFSET) #define SIM_V_23 (23+ SIM_OFFSET) #define SIM_V_24 (24+ SIM_OFFSET) #define SIM_V_25 (25+ SIM_OFFSET) /* Event tracing flags for EM */ EXTERN BOOL sim_v[EM_MAX_SIM_EVENTS]; /*---------Functions ---------*/ /* * SIM primitives Engineering Mode * Bitmask for the event tracing */ EXTERN void sim_em_sim_event_req (T_EM_SIM_EVENT_REQ *em_sim_event_req); EXTERN void em_init_sim_event_trace (void); /* * If all entities are linked into one module this definitions * prefixes all this functions with the enity name */ #ifdef OPTION_MULTITHREAD #define em_write_buffer_2 _ENTITY_PREFIXED(em_write_buffer_2) #define em_write_buffer_3 _ENTITY_PREFIXED(em_write_buffer_3) #define em_write_buffer_3a _ENTITY_PREFIXED(em_write_buffer_3a) #define check_write_index _ENTITY_PREFIXED(check_write_index) #endif EXTERN UBYTE em_write_buffer_2 (UBYTE event_no); EXTERN UBYTE em_write_buffer_3 (UBYTE event_no, UBYTE value); EXTERN UBYTE em_write_buffer_3a (UBYTE event_no, USHORT value); static UBYTE check_write_index (UBYTE n); /*-----------------------Event Macro Definition -----------*/ #define SIM_EM_READ_BINARY_FILE\ /* Read binary file */\ if (sim_v[1])\ {\ sim_v[1] = em_write_buffer_3a (SIM_V_1, sim_read_req->datafield);\ } /* sim_v[1] */ #define SIM_EM_READ_RECORD_FILE\ /* Read record file */\ if (sim_v[2])\ {\ sim_v[2] = em_write_buffer_3a (SIM_V_2, sim_read_record_req->datafield);\ } /* sim_v[2] */ #define SIM_EM_UPDATE_BINARY_FILE\ /* Update binary file */\ if (sim_v[3])\ {\ sim_v[3] = em_write_buffer_3a (SIM_V_3, sim_update_req->datafield);\ } /* sim_v[3] */ #define SIM_EM_UPDATE_RECORD\ /* Update record */\ if (sim_v[4])\ {\ sim_v[4] = em_write_buffer_3a (SIM_V_4, sim_update_record_req->datafield);\ } /* sim_v[4] */ #define SIM_EM_INCREMENT_FILE\ /* Increment file */\ if (sim_v[5])\ {\ sim_v[5] = em_write_buffer_3a (SIM_V_5, sim_increment_req->datafield);\ } /* sim_v[5] */ #define SIM_EM_VERIFY_PIN\ /* Verify PIN */\ if (sim_v[6])\ {\ sim_v[6] = em_write_buffer_3 (SIM_V_6, sim_verify_pin_req->pin_id);\ } /* sim_v[6] */ #define SIM_EM_CHANGE_PIN\ /* Change PIN */\ if (sim_v[7])\ {\ sim_v[7] = em_write_buffer_3 (SIM_V_7, sim_change_pin_req->pin_id);\ } /* sim_v[7] */ #define SIM_EM_DISABLE_PIN\ /* Disable PIN */\ if (sim_v[8])\ {\ sim_v[8] = em_write_buffer_3 (SIM_V_8, NOT_PRESENT_8BIT);\ } /* sim_v[8] */ #define SIM_EM_ENABLE_PIN\ /* Enable PIN */\ if (sim_v[9])\ {\ sim_v[9] = em_write_buffer_3 (SIM_V_9, NOT_PRESENT_8BIT);\ } /* sim_v[9] */ #define SIM_EM_UNBLOCK_PIN\ /* Unblock PIN */\ if (sim_v[10])\ {\ sim_v[10] = em_write_buffer_3 (SIM_V_10, sim_unblock_req->pin_id);\ } /* sim_v[10] */ #define SIM_EM_AUTHENTICATION\ /* Authentication */\ if (sim_v[11])\ {\ sim_v[11] = em_write_buffer_2 (SIM_V_11);\ } /* sim_v[11] */ #define SIM_EM_SIM_ACTIVATION_STARTED\ /* SIM activation started */\ if (sim_v[12])\ {\ sim_v[12] = em_write_buffer_2 (SIM_V_12);\ } /* sim_v[12] */ #define SIM_EM_SIM_ACTIVATION_RESULT\ /* SIM activation result */\ if (sim_v[13])\ {\ sim_v[13] = em_write_buffer_3a (SIM_V_13, sim_activate_cnf->cause);\ } /* sim_v[13] */ #define SIM_EM_READ_MMI_PARAMETER\ /* Read MMI parameters */\ if (sim_v[14])\ {\ sim_v[14] = em_write_buffer_2 (SIM_V_14);\ } /* sim_v[14] */ #define SIM_EM_READ_MM_PARAMETER\ /* Read MM parameters */\ if (sim_v[15])\ {\ sim_v[15] = em_write_buffer_2 (SIM_V_15);\ } /* sim_v[15] */ #define SIM_EM_READ_SMS_PARAMETER\ /* Read SMS parameters */\ if (sim_v[16])\ {\ sim_v[16] = em_write_buffer_2 (SIM_V_16);\ } /* sim_v[16] */ #define SIM_EM_SIM_REMOVE\ /* SIM removing */\ if (sim_v[17])\ {\ sim_v[17] = em_write_buffer_2 (SIM_V_17);\ } /* sim_v[17] */ #define SIM_EM_PARAMETER_UPDATE\ /* Parameter update */\ if (sim_v[18])\ {\ sim_v[18] = em_write_buffer_2 (SIM_V_18);\ } /* sim_v[18] */ #define SIM_EM_PARAMETER_SYNCHRONISATION\ /* Parameter synchronisation */\ if (sim_v[19])\ {\ sim_v[19] = em_write_buffer_2 (SIM_V_19);\ } /* sim_v[19] */ #define SIM_EM_FDN_ENABLE\ /* FDN enable */\ if (sim_v[20])\ {\ sim_v[20] = em_write_buffer_2 (SIM_V_20);\ } /* sim_v[20] */ #define SIM_EM_ADN_ENABLE\ /* ADN enable */\ if (sim_v[21])\ {\ sim_v[21] = em_write_buffer_2 (SIM_V_21);\ } /* sim_v[21] */ #define SIM_EM_SIM_TOOLKIT_ACTIVATION\ /* SIM Toolkit activation */\ if (sim_v[22])\ {\ sim_v[22] = em_write_buffer_2 (SIM_V_22);\ } /* sim_v[22] */ #define SIM_EM_PROACTIVE_COMMAND\ /* Proactive cmd */\ if (sim_v[23])\ {\ sim_v[23] = em_write_buffer_3 (SIM_V_23, cmd_type);\ } /* sim_v[23] */ #define SIM_EM_TERMINAL_RESPONSE\ /* Terminal Response */\ if (sim_v[24])\ {\ sim_v[24] = em_write_buffer_3a (SIM_V_24, sw1sw2);\ } /* sim_v[24] */ #define SIM_EM_ENVELOPE\ /* Envelope */\ if (sim_v[24])\ {\ sim_v[24] = em_write_buffer_3a (SIM_V_24, sw1sw2);\ } /* sim_v[24] */ #else /*FF_EM_MODE not defined*/ #define SIM_EM_READ_BINARY_FILE /*Event 1*/ #define SIM_EM_READ_RECORD_FILE /*Event 2*/ #define SIM_EM_UPDATE_BINARY_FILE /*Event 3*/ #define SIM_EM_UPDATE_RECORD /*Event 4*/ #define SIM_EM_INCREMENT_FILE /*Event 5*/ #define SIM_EM_VERIFY_PIN /*Event 6*/ #define SIM_EM_CHANGE_PIN /*Event 7*/ #define SIM_EM_DISABLE_PIN /*Event 8*/ #define SIM_EM_ENABLE_PIN /*Event 9*/ #define SIM_EM_UNBLOCK_PIN /*Event 10*/ #define SIM_EM_AUTHENTICATION /*Event 11*/ #define SIM_EM_SIM_ACTIVATION_STARTED /*Event 12*/ #define SIM_EM_SIM_ACTIVATION_RESULT /*Event 13*/ #define SIM_EM_READ_MMI_PARAMETER /*Event 14*/ #define SIM_EM_READ_MM_PARAMETER /*Event 15*/ #define SIM_EM_READ_SMS_PARAMETER /*Event 16*/ #define SIM_EM_SIM_REMOVE /*Event 17*/ #define SIM_EM_PARAMETER_UPDATE /*Event 18*/ #define SIM_EM_PARAMETER_SYNCHRONISATION /*Event 19*/ #define SIM_EM_FDN_ENABLE /*Event 20*/ #define SIM_EM_ADN_ENABLE /*Event 21*/ #define SIM_EM_SIM_TOOLKIT_ACTIVATION /*Event 22*/ #define SIM_EM_PROACTIVE_COMMAND /*Event 23*/ #define SIM_EM_TERMINAL_RESPONSE /*Event 24*/ #define SIM_EM_ENVELOPE /*Event 25*/ #endif /*FF_EM_MODE*/ #endif /* SIM_EM_H */