FreeCalypso > hg > fc-magnetite
view cdg-hybrid/sap/pkt.pdf @ 660:293c7db5f10f
bmi3: fixed the mysterious "mute on first call" bug
When UI-enabled fw boots on a previously blank (no /mmi/* files) FFS
for the first time, the output_volume member of the persistent UI settings
structure was left uninitialized, corresponding to the earpiece volume
being set to mute, which is an invalid setting. Because of other quirks
in the far-from-finished UI code, this volume setting takes effect only
when the first call is answered, producing the odd behaviour seen at the
user level.
The current fix is to set the blank-FFS default for output_volume to
volume level 4, which is the same -6 dB Iota volume as the ACI default.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 14 May 2020 02:50:41 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : pkt.pdf ;*** Creation : Wed Mar 11 09:58:35 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : pkt ;*** Document No. : 8443.105.02.106 ;*** Document Date : 2002-10-17 ;*** Document Status: BEING_PROCESSED ;*** Document Author: HM ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:50:46 2007" PRAGMA LAST_MODIFIED "2002-10-17" PRAGMA ID_AND_VERSION "8443.105.02.106" CONST DIO_MAX_NAME_LENGTH 16 ; arbitrary, in simulation only CONST DIO_MAX_DATA_LENGTH 100 ; arbitrary, in simulation only VALTAB VAL_sleep_mode VAL 0x01 DIO_SLEEP_ENABLE "Enter sleep mode if possible." VAL 0x02 DIO_SLEEP_DISABLE "Do not enter sleep mode." VALTAB VAL_parity VAL 0x01 DIO_PARITY_NO "Don't send a parity bit." VAL 0x02 DIO_PARITY_ODD "Send an odd parity bit." VAL 0x04 DIO_PARITY_EVEN "Send an even parity bit." VAL 0x08 DIO_PARITY_SPACE "Send a space for parity bit." VALTAB VAL_flow_control VAL 0x0001 DIO_FLOW_NO_NO "No flow control for both directions." VAL 0x0002 DIO_FLOW_SW_NO "Software flow control for receive direction and no flow control for transmit direction." VAL 0x0004 DIO_FLOW_HW_NO "Hardware flow control for receive direction and no flow control for transmit direction." VAL 0x0008 DIO_FLOW_NO_SW "No flow control for receive direction and software flow control for transmit direction." VAL 0x0010 DIO_FLOW_SW_SW "Software flow control for both directions." VAL 0x0020 DIO_FLOW_HW_SW "Hardware flow control for receive direction and software flow control for transmit direction." VAL 0x0040 DIO_FLOW_NO_HW "No flow control for receive direction and hardware flow control for transmit direction." VAL 0x0080 DIO_FLOW_SW_HW "Software flow control for receive direction and hardware flow control for transmit direction." VAL 0x0100 DIO_FLOW_HW_HW "Hardware flow control for both directions." VALTAB VAL_data_mode VAL 0x01 DIO_MODE_AT "The TE will transmit AT commands." VAL 0x02 DIO_MODE_DATA "The TE will transmit data." VAL 0x04 DIO_MODE_TRACE "The TE expects trace information via this device" VAL 0x03 DIO_MODE_DEFAULT "Default value if the driver can not provide this information" VALTAB VAL_stop_bits VAL 0x01 DIO_STOP_1 "Send 1 stop bit." VAL 0x02 DIO_STOP_15 "Send 1.5 stop bits." VAL 0x04 DIO_STOP_2 "Send 2 stop bits." VALTAB VAL_baud VAL 0x00080000 DIO_BAUD_812500 "Transmission rate of 812500 bits/sec." VAL 0x00040000 DIO_BAUD_406250 "Transmission rate of 406250 bits/sec." VAL 0x00020000 DIO_BAUD_203125 "Transmission rate of 203125 bits/sec." VAL 0x00010000 DIO_BAUD_115200 "Transmission rate of 115200 bits/sec." VAL 0x00008000 DIO_BAUD_57600 "Transmission rate of 57600 bits/sec." VAL 0x00004000 DIO_BAUD_38400 "Transmission rate of 38400 bits/sec." VAL 0x00002000 DIO_BAUD_33900 "Transmission rate of 33900 bits/sec." VAL 0x00001000 DIO_BAUD_28800 "Transmission rate of 28800 bits/sec." VAL 0x00000800 DIO_BAUD_19200 "Transmission rate of 19200 bits/sec." VAL 0x00000400 DIO_BAUD_14400 "Transmission rate of 14400 bits/sec." VAL 0x00000200 DIO_BAUD_9600 "Transmission rate of 9600 bits/sec." VAL 0x00000100 DIO_BAUD_7200 "Transmission rate of 7200 bits/sec." VAL 0x00000080 DIO_BAUD_4800 "Transmission rate of 4800 bits/sec." VAL 0x00000040 DIO_BAUD_2400 "Transmission rate of 2400 bits/sec." VAL 0x00000020 DIO_BAUD_1200 "Transmission rate of 1200 bits/sec." VAL 0x00000010 DIO_BAUD_600 "Transmission rate of 600 bits/sec." VAL 0x00000008 DIO_BAUD_300 "Transmission rate of 300 bits/sec." VAL 0x00000004 DIO_BAUD_150 "Transmission rate of 150 bits/sec." VAL 0x00000002 DIO_BAUD_75 "Transmission rate of 75 bits/sec." VAL 0x00000001 DIO_BAUD_AUTO "Automatic detection." VALTAB VAL_mux_configuration VAL 0x01 DIO_MUX_MODE_BASIC "The multiplexer supports Basic option." VAL 0x02 DIO_MUX_MODE_ADVANCED "The multiplexer supports Advanced option." VAL 0x04 DIO_MUX_SUBSET_UIH "The multiplexer supports UIH frames." VAL 0x08 DIO_MUX_SUBSET_UI "The multiplexer supports UI frames." VAL 0x10 DIO_MUX_SUBSET_I "The multiplexer supports I frames." VALTAB VAL_guard_period VAL 0 DIO_ESC_OFF "Turn escape sequence detection off." VALTAB VAL_data_bits VAL 0x10 DIO_CHAR_5 "Send 5 bits per character." VAL 0x20 DIO_CHAR_6 "Send 6 bits per character." VAL 0x40 DIO_CHAR_7 "Send 7 bits per character." VAL 0x80 DIO_CHAR_8 "Send 8 bits per character." VALTAB VAL_convergence VAL 0x01 DIO_CONV_SER "The device can contain serial data." VAL 0x02 DIO_CONV_PACKET "The device can contain packet data." VAL 0x04 DIO_CONV_MUX "The device can start a multiplexer." VALTAB VAL_state VAL 0x80000000 DIO_SA "read/write, Device ready" VAL 0x40000000 DIO_SB "read/write, Data valid" VAL 0x20000000 DIO_X "read/write, Flow control" VAL 0x10000000 DIO_RING "write, RING indicator" VAL 0x08000000 DIO_ESC "read, escape sequence detected" VAL 0x04000000 DIO_DISC "read, link disconnected" VAL 0x01000000 DIO_MUX_STOP "read/write, stop the multiplexer" VAL 0x02000000 DIO_BRK "read/write, break received / to be sent" VAL 0x000000FF DIO_BRKLEN "read/write, length of the break signal in characters" VAL 0x00000000 DIO_PACKET_UNKNOWN "Packet transfer: No packet type available." VAL 0x00000021 DIO_PACKET_IP "Packet transfer: Simple IP packet" VAL 0x0000002D DIO_PACKET_CTCP "Packet transfer: Van Jacobson compressed TCP/IP header" VAL 0x0000002F DIO_PACKET_UTCP "Packet transfer: Van Jacobson uncompressed TCP/IP header" VALTAB VAL_cause VAL 0xD200 PKTCS_SUCCESS "0b11010010 00000000 No error, success" VAL 0xD201 PKTCS_INVALID_PARAMS "0b11010010 00000001 Device number invalid" VAL 0xD202 PKTCS_INVALID_PEER "0b11010010 00000010 Peer does not exist" VAL 0xD203 PKTCS_DISCONNECT "0b11010010 00000011 The driver signalled a DRV_SIGTYPE_DISCONNECT" VAL 0xD204 PKTCS_INTERNAL_DRV_ERROR "0b11010010 00000100 A driver function returned DRV_INTERNAL_ERROR" VAR convergence "serial data and / or packet data" B VAL @p_pkt - VAL_convergence@ VAR data_mode "TE will use the device to transmit AT commands or data or both" B VAL @p_pkt - VAL_data_mode@ VAR sleep_mode "describes if the device is able to enter sleep mode" B VAL @p_pkt - VAL_sleep_mode@ VAR mux_configuration "describes the supported configurations of the multiplexer" L VAL @p_pkt - VAL_mux_configuration@ VAR n1 "maximum frame size of a multiplexer frame" S VAR n2 "maximum number of retransmissions" B VAR t1 "acknowledgement timer" B VAR t2 "response timer for the multiplexer control channel" B VAR t3 "wake up response timer" B VAR k "window size for advanced option with error recovery" B VAR mtu "Maximum Transfer Unit" S VAR baud "supported transmission rates" L VAL @p_pkt - VAL_baud@ VAR data_bits "supported numbers of bits per character" B VAL @p_pkt - VAL_data_bits@ VAR stop_bits "supported number of stop bits" B VAL @p_pkt - VAL_stop_bits@ VAR parity "supported types of parity checking" B VAL @p_pkt - VAL_parity@ VAR flow_control "supported types of flow control" S VAL @p_pkt - VAL_flow_control@ VAR xon "XON character" B VAR xoff "XOFF character" B VAR esc_char "ASCII character which could appear three times as an escape sequence" B VAR guard_period "minimal duration before and after escape sequence" S VAL @p_pkt - VAL_guard_period@ VAR l_buf "length of content in bit" S VAR o_buf "offset of content in bit" S VAR buf "test data" B VAR signal_type "Signal type" S VAR drv_handle "Unique handle for this driver" S VAR retval "Return value" S VAR device_no "Data device number" B VAR buffer_type "Type of buffer to be cleared" S VAR state "Line state bits" L VAL @p_pkt - VAL_state@ VAR mask "Line state mask" L VAL @p_pkt - VAL_state@ VAR cause "Cause value" S VAL @p_pkt - VAL_cause@ VAR peer "Name of peer, to be casted to 'const char *'" L VAR link_id "Link identifier" L VAR dti_direction "DTI direction" B COMP dio_dcb "Device Control Block data" { convergence ; serial data and / or packet data data_mode ; TE will use the device to transmit AT commands or data or both sleep_mode ; describes if the device is able to enter sleep mode mux_configuration ; describes the supported configurations of the multiplexer n1 ; maximum frame size of a multiplexer frame n2 ; maximum number of retransmissions t1 ; acknowledgement timer t2 ; response timer for the multiplexer control channel t3 ; wake up response timer k ; window size for advanced option with error recovery mtu ; Maximum Transfer Unit baud ; supported transmission rates data_bits ; supported numbers of bits per character stop_bits ; supported number of stop bits parity ; supported types of parity checking flow_control ; supported types of flow control xon ; XON character xoff ; XOFF character esc_char ; ASCII character which could appear three times as an escape sequence guard_period ; minimal duration before and after escape sequence } COMP sdu "test data" { l_buf ; length of content in bit o_buf ; offset of content in bit buf [1] ; test data } ; PKT_CONNECT_IND 0x80004045 ; PKT_CONNECT_RES 0x80000045 ; PKT_CONNECT_REJ 0x80010045 ; PKT_DISCONNECT_IND 0x80014045 ; PKT_DTI_OPEN_REQ 0x80020045 ; PKT_DTI_OPEN_CNF 0x80024045 ; PKT_MODIFY_REQ 0x80030045 ; PKT_MODIFY_CNF 0x80034045 ; PKT_DTI_CLOSE_REQ 0x80040045 ; PKT_DTI_CLOSE_CNF 0x80044045 ; PKT_DTI_CLOSE_IND 0x80054045 ; PKT_SIG_CLEAR_IND 0x80050045 ; PKT_SIG_FLUSH_IND 0x80060045 ; PKT_SIG_READ_IND 0x80070045 ; PKT_SIG_WRITE_IND 0x80080045 ; PKT_SIG_CONNECT_IND 0x80090045 ; PKT_SIG_DISCONNECT_IND 0x800A0045 ; PKT_DIO_SIGNAL_IND 0x80200045 ; PKT_DIO_INIT_REQ 0x80204045 ; PKT_DIO_INIT_CNF 0x80210045 ; PKT_DIO_EXIT_REQ 0x80214045 ; PKT_DIO_READ_REQ 0x80224045 ; PKT_DIO_READ_CNF 0x80220045 ; PKT_DIO_GETDATA_REQ 0x80234045 ; PKT_DIO_GETDATA_CNF 0x80230045 ; PKT_DIO_WRITE_REQ 0x80244045 ; PKT_DIO_WRITE_CNF 0x80240045 ; PKT_DIO_GETBUFFER_REQ 0x80254045 ; PKT_DIO_GETBUFFER_CNF 0x80250045 ; PKT_DIO_CLEAR_REQ 0x80264045 ; PKT_DIO_CLEAR_CNF 0x80260045 ; PKT_DIO_FLUSH_REQ 0x80274045 ; PKT_DIO_FLUSH_CNF 0x80270045 ; PKT_DIO_SETSIGNAL_REQ 0x80284045 ; PKT_DIO_SETSIGNAL_CNF 0x80280045 ; PKT_DIO_RESETSIGNAL_REQ 0x80294045 ; PKT_DIO_RESETSIGNAL_CNF 0x80290045 ; PKT_DIO_GETCAP_REQ 0x802A4045 ; PKT_DIO_GETCAP_CNF 0x802A0045 ; PKT_DIO_SETCONFIG_REQ 0x802B4045 ; PKT_DIO_SETCONFIG_CNF 0x802B0045 ; PKT_DIO_GETCONFIG_REQ 0x802C4045 ; PKT_DIO_GETCONFIG_CNF 0x802C0045 ; PKT_DIO_CLOSEDEVICE_REQ 0x802D4045 ; PKT_DIO_CLOSEDEVICE_CNF 0x802D0045 PRIM PKT_CONNECT_IND 0x80004045 { device_no ; Device number dio_dcb ; Device Control Block data } PRIM PKT_CONNECT_RES 0x80000045 { device_no ; Device number dio_dcb ; Device Control Block data } PRIM PKT_CONNECT_REJ 0x80010045 { device_no ; Device number } PRIM PKT_DISCONNECT_IND 0x80014045 { device_no ; Device number cause ; Cause value } PRIM PKT_DTI_OPEN_REQ 0x80020045 { device_no ; Device number peer ; Peer link_id ; Link identifier dti_direction ; DTI direction } PRIM PKT_DTI_OPEN_CNF 0x80024045 { device_no ; Device number cause ; Cause value } PRIM PKT_MODIFY_REQ 0x80030045 { device_no ; Device number dio_dcb ; Device Control Block data } PRIM PKT_MODIFY_CNF 0x80034045 { device_no ; Device number cause ; Cause value } PRIM PKT_DTI_CLOSE_REQ 0x80040045 { device_no ; Device number } PRIM PKT_DTI_CLOSE_CNF 0x80044045 { device_no ; Device number } PRIM PKT_DTI_CLOSE_IND 0x80054045 { device_no ; Device number } PRIM PKT_SIG_CLEAR_IND 0x80050045 { } PRIM PKT_SIG_FLUSH_IND 0x80060045 { } PRIM PKT_SIG_READ_IND 0x80070045 { } PRIM PKT_SIG_WRITE_IND 0x80080045 { } PRIM PKT_SIG_CONNECT_IND 0x80090045 { } PRIM PKT_SIG_DISCONNECT_IND 0x800A0045 { } PRIM PKT_DIO_SIGNAL_IND 0x80200045 { device_no ; Data device number signal_type ; Signal type } PRIM PKT_DIO_INIT_REQ 0x80204045 { drv_handle ; Driver handle } PRIM PKT_DIO_INIT_CNF 0x80210045 { retval ; Return value } PRIM PKT_DIO_EXIT_REQ 0x80214045 { } PRIM PKT_DIO_READ_REQ 0x80224045 { device_no ; Data Device number } PRIM PKT_DIO_READ_CNF 0x80220045 { retval ; return value } PRIM PKT_DIO_GETDATA_REQ 0x80234045 { device_no ; Data Device number } PRIM PKT_DIO_GETDATA_CNF 0x80230045 { retval ; return value state ; Line state sdu ; Data descriptor equivalent } PRIM PKT_DIO_WRITE_REQ 0x80244045 { device_no ; Data Device number state ; State mask ; Mask sdu ; Data descriptor equivalent } PRIM PKT_DIO_WRITE_CNF 0x80240045 { retval ; return value } PRIM PKT_DIO_GETBUFFER_REQ 0x80254045 { device_no ; Data Device number } PRIM PKT_DIO_GETBUFFER_CNF 0x80250045 { retval ; return value } PRIM PKT_DIO_CLEAR_REQ 0x80264045 { device_no ; Data device number buffer_type ; Buffer type } PRIM PKT_DIO_CLEAR_CNF 0x80260045 { retval ; return value } PRIM PKT_DIO_FLUSH_REQ 0x80274045 { device_no ; Data device number } PRIM PKT_DIO_FLUSH_CNF 0x80270045 { retval ; return value } PRIM PKT_DIO_SETSIGNAL_REQ 0x80284045 { signal_type ; Signal type } PRIM PKT_DIO_SETSIGNAL_CNF 0x80280045 { retval ; return value } PRIM PKT_DIO_RESETSIGNAL_REQ 0x80294045 { signal_type ; Signal type } PRIM PKT_DIO_RESETSIGNAL_CNF 0x80290045 { retval ; return value } PRIM PKT_DIO_GETCAP_REQ 0x802A4045 { device_no ; Data device number } PRIM PKT_DIO_GETCAP_CNF 0x802A0045 { retval ; return value dio_dcb ; Device Control Block } PRIM PKT_DIO_SETCONFIG_REQ 0x802B4045 { device_no ; Data device number dio_dcb ; Device Control Block } PRIM PKT_DIO_SETCONFIG_CNF 0x802B0045 { retval ; return value } PRIM PKT_DIO_GETCONFIG_REQ 0x802C4045 { device_no ; Data device number } PRIM PKT_DIO_GETCONFIG_CNF 0x802C0045 { retval ; return value } PRIM PKT_DIO_CLOSEDEVICE_REQ 0x802D4045 { device_no ; Data device number } PRIM PKT_DIO_CLOSEDEVICE_CNF 0x802D0045 { retval ; return value }