FreeCalypso > hg > fc-magnetite
view cdg211/prim/mmcc.pdf @ 660:293c7db5f10f
bmi3: fixed the mysterious "mute on first call" bug
When UI-enabled fw boots on a previously blank (no /mmi/* files) FFS
for the first time, the output_volume member of the persistent UI settings
structure was left uninitialized, corresponding to the earpiece volume
being set to mute, which is an invalid setting. Because of other quirks
in the far-from-finished UI code, this volume setting takes effect only
when the first call is answered, producing the odd behaviour seen at the
user level.
The current fix is to set the blank-FFS default for output_volume to
volume level 4, which is the same -6 dB Iota volume as the ACI default.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 14 May 2020 02:50:41 +0000 |
parents | 56abf6cf8a0b |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : mmcc.pdf ;*** Creation : Fri Jun 08 13:57:48 CST 2007 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : mmcc ;*** Document No. : 6147.104.97.102 ;*** Document Date : 2002-07-31 ;*** Document Status: BEING_PROCESSED ;*** Document Author: HM ;******************************************************************************** PRAGMA SRC_FILE_TIME "Mon Nov 24 15:49:16 2003" PRAGMA LAST_MODIFIED "2002-07-31" PRAGMA ID_AND_VERSION "6147.104.97.102" CONST MM_CAUSE 0x04 ; Used in cause values to mark MM as the cause originating entity VALTAB VAL_ch_mode VAL 0 CHM_SIG_ONLY "signalling only" VAL 1 CHM_SPEECH "speech full rate or half rate version 1" VAL 33 CHM_SPEECH_V2 "speech full rate or half rate version 2" VAL 65 CHM_SPEECH_V3 "speech full rate or half rate version 3" VAL 3 CHM_DATA_9_6 "data 9.6 kBit/s" VAL 11 CHM_DATA_4_8 "data 4.8 kBit/s" VAL 19 CHM_DATA_2_4 "data 2.4 kBit/s" VAL 15 CHM_DATA_14_4 "data 2.4 kBit/s" VALTAB VAL_ch_type VAL 0 CH_SDCCH "SDCCH channel" VAL 1 CH_TCH_F "TCH Fullrate" VAL 2 CH_TCH_H "TCH Halfrate" VALTAB VAL_estcs VAL 0x0400 ESTCS_SERV_REQ_MM "service requested by MM (Location updating or detach)" VAL 0x04A0 ESTCS_EMERGE "emergency call" VAL 0x04C0 ESTCS_CAL_REEST "call reestablishment" VAL 0x04E0 ESTCS_MOB_ORIG_SPCH "mobile originated speech call by CC" VAL 0x04E1 ESTCS_MOB_ORIG_DATA "mobile originated data call by CC" VAL 0x04E2 ESTCS_MOB_ORIG_DATA_HR_SUFF "mobile originated data call by CC, halfrate channel sufficient" VALTAB VAL_cause VAL 0x0402 MMCS_IMSI_IN_HLR "IMSI unknown in HLR" VAL 0x0403 MMCS_ILLEGAL_MS "Illegal MS" VAL 0x0404 MMCS_IMSI_IN_VLR "IMSI unknown in VLR" VAL 0x0405 MMCS_IMEI_NOT_ACCEPTED "IMEI not accepted" VAL 0x0406 MMCS_ILLEGAL_ME "Illegal ME" VAL 0x040B MMCS_PLMN_NOT_ALLOWED "PLMN not allowed" VAL 0x040C MMCS_LA_NOT_ALLOWED "Location Area not allowed" VAL 0x040D MMCS_ROAMING_NOT_ALLOWED "Roaming not allowed in this location area" VAL 0x0411 MMCS_NETWORK_FAILURE "Network failure" VAL 0x0416 MMCS_CONGESTION "Congestion" VAL 0x0420 MMCS_SERVICE_NOT_SUPPORTED "Service option not supported" VAL 0x0421 MMCS_SERVICE_NOT_SUBSCRIBED "Requested service option not subscribed" VAL 0x0422 MMCS_SERVICE_ORDER "Service option temporarily out of order" VAL 0x0426 MMCS_IDENTIFIY "Call cannot be identified" VAL 0x0430 MMCS_RETRY_IN_NEW_CELL "retry upon entry into a new cell (mapped 0x0430..0x043f -> 0x0430)" VAL 0x045F MMCS_INCORRECT_MESSAGE "Semantically incorrect message" VAL 0x0460 MMCS_INVALID_MAND_MESSAGE "Invalid mandatory information" VAL 0x0461 MMCS_MESSAGE_TYPE_NOT_IMPLEM "Message type non-existent or not implemented" VAL 0x0462 MMCS_MESSAGE_TYPE_INCOMPAT "Message type not compatible with the protocol state" VAL 0x0463 MMCS_IE_NOT_IMPLEM "Information element non-existent or not implemented" VAL 0x0464 MMCS_CONDITIONAL_IE "Conditional IE error" VAL 0x0465 MMCS_MESSAGE_INCOMPAT "Message not compatible with the protocol state" VAL 0x046F MMCS_UNSPECIFIED "Protocol error, unspecified" VAL 0xC400 MMCS_SUCCESS "No error, successful operation (MM)" VAL 0xC480 MMCS_NO_REGISTRATION "MS is not registered or deregistration started" VAL 0xC481 MMCS_TIMER_RECOVERY "time-out in MM during establishment" VAL 0xC482 MMCS_NO_REESTABLISH "Cell does not support call reestablishment" VAL 0xC483 MMCS_INT_PREEM "Preemptive release, e.g. MO-MT clash in MM" VAL 0xC484 MMCS_PLMN_NOT_IDLE_MODE "reject, not in idle mode (MMR_PLMN_IND)" VAL 0xC488 MMCS_AUTHENTICATION_REJECTED "AUTHENTICATION REJECT received" VAL 0xC489 MMCS_SIM_REMOVED "A valid SIM is not present" VAL 0xC4FF MMCS_INT_NOT_PRESENT "No error cause (MM)" VALTAB VAL_ti VAL 0 - 6 "ms originated transaction" VAL 8 - 14 "ms originated transaction" VAL 7 "reserved" VAL 15 "reserved" VAR ch_type "Channel Type" B VAL @p_mmcc - VAL_ch_type@ VAR ch_mode "Channel Mode" B VAL @p_mmcc - VAL_ch_mode@ VAR estcs "establishment cause" S VAL @p_mmcc - VAL_estcs@ VAR cause "MM cause" S VAL @p_mmcc - VAL_cause@ VAR l_buf "length in bits" S VAR o_buf "offset in bits" S VAR buf "bit buffer" B VAR ti "transaction identifier" B VAL @p_mmcc - VAL_ti@ VAR d1 "dummy, not used" B VAR d2 "dummy, not used" B COMP chm "Channel using mode" { ch_type ; Channel Type ch_mode ; Channel Mode } COMP sdu "Service Data Unit" { l_buf ; length in bits o_buf ; offset in bits buf [1] ; bit buffer } ; MMCC_ESTABLISH_REQ 0x80000007 ; MMCC_RELEASE_REQ 0x80010007 ; MMCC_DATA_REQ 0x80020007 ; MMCC_DATA_IND 0x80004007 ; MMCC_REESTABLISH_REQ 0x80030007 ; MMCC_PROMPT_REJ 0x80040007 ; MMCC_PROMPT_RSP 0x80050007 ; MMCC_SYNC_IND 0x80014007 ; MMCC_ERROR_IND 0x80024007 ; MMCC_ESTABLISH_CNF 0x80034007 ; MMCC_ESTABLISH_IND 0x80044007 ; MMCC_REESTABLISH_CNF 0x80054007 ; MMCC_RELEASE_IND 0x80064007 ; MMCC_PROMPT_IND 0x80074007 PRIM MMCC_ESTABLISH_REQ 0x80000007 { ti ; transaction identifier estcs ; establishment cause } PRIM MMCC_RELEASE_REQ 0x80010007 { ti ; transaction identifier } PRIM MMCC_DATA_REQ 0x80020007 { d1 ; dummy d2 ; dummy sdu ; service data unit } PRIM MMCC_DATA_IND 0x80004007 { d1 ; dummy d2 ; dummy sdu ; service data unit } PRIM MMCC_REESTABLISH_REQ 0x80030007 { ti ; transaction identifier } PRIM MMCC_PROMPT_REJ 0x80040007 { } PRIM MMCC_PROMPT_RSP 0x80050007 { ti ; transaction identifier } PRIM MMCC_SYNC_IND 0x80014007 { ti ; transaction identifier chm ; channel using mode } PRIM MMCC_ERROR_IND 0x80024007 { ti ; transaction identifier cause ; error cause } PRIM MMCC_ESTABLISH_CNF 0x80034007 { ti ; transaction identifier } PRIM MMCC_ESTABLISH_IND 0x80044007 { d1 ; dummy d2 ; dummy sdu ; service data unit } PRIM MMCC_REESTABLISH_CNF 0x80054007 { ti ; transaction identifier } PRIM MMCC_RELEASE_IND 0x80064007 { ti ; transaction identifier cause ; release cause } PRIM MMCC_PROMPT_IND 0x80074007 { }